qmk-dactyl-manuform-a/layouts/community/60_ansi
Joe Wasson 7ce5402417
Updates to Talljoe's Keymaps (#10115)
* Minor Tweak

* Refactor spacebar defines.

* Add TMO50 layout

* Rename Atreus keymap.

* Refactor Atreus for readability.

* Eliminate tapdance quote and tweak maltroff.

* Factor out tapdance.

* Add some fancy combos and keys.

* Remove combos for now because they cause pain.

* WIP visualizer

* Alternate method for reset

* WIP2 visualizer

* Layer text tweak.

* Add made-up layout Nortron as a combination of Norman and Maltron.

* Add backspace.

* Add Talljoe keymap to Prime E.

* Fix double-colon so it doesn't press enter if shift is released early.

* Use new make command.

* Bring some modern standards into code and add licenses.

* Remove QMK_KEYBOARD_CONFIG_H and fixup QMK_KEYBOARD_H.

* Move from `biton32` to `get_highest_layer`.

* Remove PREVENT_STUCK_MODIFIERS

* Update keyboards/thevankeyboards/minivan/keymaps/talljoe-minivan/config.h
2020-11-06 17:16:22 -08:00
..
brandonschlack-ansi [Keymap] add brandonschlack userspace and keymaps (#10411) 2020-11-04 21:55:03 -08:00
mechmerlin-ansi Merlin's userspace updates (#8074) 2020-02-03 22:37:01 +01:00
stanrc85-ansi Userspace and keymap updates (#8037) 2020-01-29 17:23:55 -05:00
talljoe-ansi Updates to Talljoe's Keymaps (#10115) 2020-11-06 17:16:22 -08:00
xyverz [Keymap] Updating keymaps (#7170) 2019-10-28 16:09:01 -07:00
layout.json Creates a layouts/ folder for keymaps shared between keyboards (#1609) 2017-08-23 22:29:07 -04:00
readme.md edit readmes for layout for 60_ansi (#2944) 2018-05-12 08:58:17 -07:00

readme.md

60_ansi

This is the standard 60% ANSI keyboard layout.

Requirements

1. Layout defined

A keyboard's .h file needs to have LAYOUT_60_ansi defined

#define LAYOUT_60_ansi( \
    K36, K37, K46, K47, K56, K57, K66, K67, K76, K77, K06, K07, K17,      K27, \
    K34, K35, K44, K45, K54, K55, K64, K65, K75, K05, K15, K16, K25, K24, \
    K32, K33, K43, K52, K53, K63, K73, K74, K03, K04, K13, K14, K23, \
    K31,      K42, K51, K61, K62, K71, K72, K01, K02, K11, K12, K21,  \
    K30, K40, K50,           K60,                     K70, K00, K10, K20  \
) { \
    { K00, K01,   K02,   K03, K04, K05, K06,   K07 }, \
    { K10, K11,   K12,   K13, K14, K15, K16,   K17 }, \
    { K20, K21,   KC_NO, K23, K24, K25, KC_NO, K27 }, \
    { K30, K31,   K32,   K33, K34, K35, K36,   K37 }, \
    { K40, KC_NO, K42,   K43, K44, K45, K46,   K47 }, \
    { K50, K51,   K52,   K53, K54, K55, K56,   K57 }, \
    { K60, K61,   K62,   K63, K64, K65, K66,   K67 }, \
    { K70, K71,   K72,   K73, K74, K75, K76,   K77 } \
}
)

This layout needs to match the layout defined in

    qmk_firmware/layouts/community/layout.json

2. Configuring rules.mk

rules.mk needs to have the following line:

    LAYOUTS = 60_ansi

3. Defining a keymap

A keymap must be defined at

qmk_firmware/layouts/community/60_ansi/yourfoldername/keymap.c   

This keymap must have a LAYOUT_60_ansi layout defined.

const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[BASE] = LAYOUT_60_ansi(
    KC_GESC, KC_1,    KC_2, KC_3, KC_4, KC_5, KC_6, KC_7,  KC_8,    KC_9,    KC_0,    KC_MINS,  KC_EQL,  KC_BSPC, \
	KC_TAB,  KC_Q,    KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U,  KC_I,    KC_O,    KC_P,    KC_LBRC,  KC_RBRC, KC_BSLASH, \
    KC_LCTL, KC_A,    KC_S, KC_D, KC_F, KC_G, KC_H, KC_J,  KC_K,    KC_L,    KC_SCLN, KC_QUOT,  KC_ENT,  \
    KC_LSFT, KC_Z,    KC_X, KC_C, KC_V, KC_B, KC_N, KC_M,  KC_COMM, KC_DOT,  KC_SLSH, KC_RSFT, \
    KC_LCTL, KC_LALT, KC_LGUI,       KC_SPACE,             MO(1),   KC_RALT, KC_RGUI, KC_RCTL),
 };

Usage

To make generate a hex file, type

make yourkeyboard:yourfoldername

This hex file will contain a keymap with layout LAYOUT_60_ansi derived from

qmk_firmware/layouts/community/60_ansi/yourfoldername/keymap.c