qmk-dactyl-manuform-a/keyboards/percent/skog
fauxpark 519df78cdb
Set device version from config.h for V-USB boards (#7316)
2019-11-15 10:21:53 +11:00
..
keymaps/default
README.md
backlight.c
backlight_custom.h
breathing_custom.h
config.h Set device version from config.h for V-USB boards (#7316) 2019-11-15 10:21:53 +11:00
info.json
matrix.c
rules.mk Convert remaining PS2AVRGB boards to I2C WS2812 driver (#7245) 2019-11-03 14:43:13 -08:00
skog.c Convert remaining PS2AVRGB boards to I2C WS2812 driver (#7245) 2019-11-03 14:43:13 -08:00
skog.h
usbconfig.h Set device version from config.h for V-USB boards (#7316) 2019-11-15 10:21:53 +11:00

README.md

Skog TKL

Keyboard Maintainer: QMK Community
Hardware Supported: Skog PCB
Hardware Availability: https://geekhack.org/index.php?topic=87953.0

Make example for this keyboard (after setting up your build environment):

make percent/skog:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00, commonly programmed as Pause while plugging in the keyboard.

Windows:

  1. Download HIDBootFlash.
  2. Place your keyboard into reset.
  3. Press the Find Device button and ensure that your keyboard is found.
  4. Press the Open .hex File button and locate the .hex file you created.
  5. Press the Flash Device button and wait for the process to complete.

macOS:

  1. Install homebrew by typing the following:

    /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
    
  2. Install crosspack-avr.

    brew cask install crosspack-avr
    
  3. Install the following packages:

    brew install python3
    pip3 install pyusb
    brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
    
  4. Place your keyboard into reset.

  5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

Please Note: You will need to use the EEP_RST keycode first, followed by unplugging/replugging the board to get RGB underglow effects to work.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.