qmk-dactyl-manuform-a/tmk_core/common/avr/suspend.c

181 lines
3.5 KiB
C

#include <stdbool.h>
#include <avr/sleep.h>
#include <avr/wdt.h>
#include <avr/interrupt.h>
#include "matrix.h"
#include "action.h"
#include "backlight.h"
#include "suspend_avr.h"
#include "suspend.h"
#include "timer.h"
#include "led.h"
#include "host.h"
#ifdef PROTOCOL_LUFA
#include "lufa.h"
#endif
#ifdef AUDIO_ENABLE
#include "audio.h"
#endif /* AUDIO_ENABLE */
#ifdef RGBLIGHT_SLEEP
#include "rgblight.h"
#endif
#define wdt_intr_enable(value) \
__asm__ __volatile__ ( \
"in __tmp_reg__,__SREG__" "\n\t" \
"cli" "\n\t" \
"wdr" "\n\t" \
"sts %0,%1" "\n\t" \
"out __SREG__,__tmp_reg__" "\n\t" \
"sts %0,%2" "\n\t" \
: /* no outputs */ \
: "M" (_SFR_MEM_ADDR(_WD_CONTROL_REG)), \
"r" (_BV(_WD_CHANGE_BIT) | _BV(WDE)), \
"r" ((uint8_t) ((value & 0x08 ? _WD_PS3_MASK : 0x00) | \
_BV(WDIE) | (value & 0x07)) ) \
: "r0" \
)
/** \brief Suspend idle
*
* FIXME: needs doc
*/
void suspend_idle(uint8_t time)
{
cli();
set_sleep_mode(SLEEP_MODE_IDLE);
sleep_enable();
sei();
sleep_cpu();
sleep_disable();
}
#ifndef NO_SUSPEND_POWER_DOWN
/** \brief Power down MCU with watchdog timer
*
* wdto: watchdog timer timeout defined in <avr/wdt.h>
* WDTO_15MS
* WDTO_30MS
* WDTO_60MS
* WDTO_120MS
* WDTO_250MS
* WDTO_500MS
* WDTO_1S
* WDTO_2S
* WDTO_4S
* WDTO_8S
*/
static uint8_t wdt_timeout = 0;
/** \brief Power down
*
* FIXME: needs doc
*/
static void power_down(uint8_t wdto)
{
#ifdef PROTOCOL_LUFA
if (USB_DeviceState == DEVICE_STATE_Configured) return;
#endif
wdt_timeout = wdto;
// Watchdog Interrupt Mode
wdt_intr_enable(wdto);
#ifdef BACKLIGHT_ENABLE
backlight_set(0);
#endif
// Turn off LED indicators
led_set(0);
#ifdef AUDIO_ENABLE
// This sometimes disables the start-up noise, so it's been disabled
// stop_all_notes();
#endif /* AUDIO_ENABLE */
#ifdef RGBLIGHT_SLEEP
#ifdef RGBLIGHT_ANIMATIONS
rgblight_timer_disable();
#endif
rgblight_disable_noeeprom();
#endif
// TODO: more power saving
// See PicoPower application note
// - I/O port input with pullup
// - prescale clock
// - BOD disable
// - Power Reduction Register PRR
set_sleep_mode(SLEEP_MODE_PWR_DOWN);
sleep_enable();
sei();
sleep_cpu();
sleep_disable();
// Disable watchdog after sleep
wdt_disable();
}
#endif
/** \brief Suspend power down
*
* FIXME: needs doc
*/
void suspend_power_down(void)
{
#ifndef NO_SUSPEND_POWER_DOWN
power_down(WDTO_15MS);
#endif
}
__attribute__ ((weak)) void matrix_power_up(void) {}
__attribute__ ((weak)) void matrix_power_down(void) {}
bool suspend_wakeup_condition(void)
{
matrix_power_up();
matrix_scan();
matrix_power_down();
for (uint8_t r = 0; r < MATRIX_ROWS; r++) {
if (matrix_get_row(r)) return true;
}
return false;
}
/** \brief run immediately after wakeup
*
* FIXME: needs doc
*/
void suspend_wakeup_init(void)
{
// clear keyboard state
clear_keyboard();
#ifdef BACKLIGHT_ENABLE
backlight_init();
#endif
led_set(host_keyboard_leds());
#ifdef RGBLIGHT_SLEEP
rgblight_enable_noeeprom();
#ifdef RGBLIGHT_ANIMATIONS
rgblight_timer_enable();
#endif
#endif
}
#ifndef NO_SUSPEND_POWER_DOWN
/* watchdog timeout */
ISR(WDT_vect)
{
// compensate timer for sleep
switch (wdt_timeout) {
case WDTO_15MS:
timer_count += 15 + 2; // WDTO_15MS + 2(from observation)
break;
default:
;
}
}
#endif