qmk-dactyl-manuform-a/lib/lufa/Demos/Device/ClassDriver/GenericHID/GenericHID.txt

80 lines
2.5 KiB
Plaintext

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Generic HID Device
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBx)
* \li Series C XMEGA AVRs (ATXMEGAxxxCx)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification \n
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Generic HID device demonstration application. This gives a simple reference application
* for implementing a generic HID device, using the basic USB HID drivers in all modern
* OSes (i.e. no special drivers required). By default it accepts and sends up to 8 byte reports
* to and from a USB Host, and transmits the last sent report back to the host.
*
* On start-up the system will automatically enumerate and function as a vendor HID device.
* When controlled by a custom HID class application, reports can be sent and received by
* both the standard data endpoint and control request methods defined in the HID specification.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <th><b>Define Name:</b></th>
* <th><b>Location:</b></th>
* <th><b>Description:</b></th>
* </tr>
* <tr>
* <td>GENERIC_REPORT_SIZE</td>
* <td>AppConfig.h</td>
* <td>This token defines the size of the device reports, both sent and received (including report ID byte). The value
* must be an integer ranging from 1 to 255.</td>
* </tr>
* </table>
*/