qmk-dactyl-manuform-a/keyboards/gh60/revc
Ryan f718a10889
Fix up build options comments (#15463)
2021-12-12 18:05:37 -08:00
..
keymaps Remove unused KEYBOARD_LOCK_ENABLE from rules (#14920) 2021-10-25 21:14:46 -07:00
config.h Remove unused `IS_COMMAND()` instances and Magic Key definitions (#14610) 2021-09-26 02:57:20 -07:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
pinout.txt
readme.md
revc.c Refactor to use led config - Part 5 (#10975) 2020-11-21 19:11:24 +00:00
revc.h Refactor to use led config - Part 5 (#10975) 2020-11-21 19:11:24 +00:00
rules.mk Fix up build options comments (#15463) 2021-12-12 18:05:37 -08:00

readme.md

GH60 Rev C

gh60 Rev C PCB

A common 60% PCB.

Keyboard Maintainer: QMK Community
Hardware Supported: GH60 rev. B and rev. C
Hardware Availability: http://blog.komar.be/projects/gh60-programmable-keyboard/

Make example for this keyboard (after setting up your build environment):

make gh60/revc:default

Note: This GH60 firmware will not be compatible with the GH60 Satan PCB. Conversely, the GH60 Satan firmware will not be compatible with this PCB. Please ensure you have the correct firmware/pcb combination before flashing.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

GH60 Hardware Information

/* Column pin configuration
* col: 0   1   2   3   4   5   6   7   8   9   10  11  12  13
* pin: F0  F1  E6  C7  C6  B6  D4  B1  B7  B5  B4  D7  D6  B3  (Rev.C)
*/
 
/* Row pin configuration
* row: 0   1   2   3   4
* pin: D0  D1  D2  D3  D5
*/
 
GPIO pads
0 F7 WASD LEDs
1 F6 ESC LED
2 F5 FN LED
3 F4 POKER Arrow LEDs
 
B2 Capslock LED
B0 not connected

Functions to controls LED clusters

gh60_caps_led_on()
gh60_poker_leds_on()
gh60_fn_led_on()
gh60_esc_led_on()
gh60_wasd_leds_on()

gh60_caps_led_off()
gh60_poker_leds_off()
gh60_fn_led_off()
gh60_esc_led_off()
gh60_wasd_leds_off()