qmk-dactyl-manuform-a/keyboards/keebio/levinson
Ryan 6b74e48f81
Remove audio pin references in rules.mk (#14532)
2021-09-21 20:04:03 +10:00
..
keymaps Remove Full Bootmagic (#13846) 2021-08-06 23:59:56 -07:00
rev1 Remove empty override functions (#14312) 2021-09-05 21:36:31 +01:00
rev2
rev3 Add a <FEATURE>_SUPPORTED flag (#9058) 2021-01-30 13:08:58 -08:00
.noci
config.h
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
levinson.c Make Swap Hands use PROGMEM (#12284) 2021-05-09 23:21:09 -07:00
levinson.h Remove KEYMAP and LAYOUT_kc (#12160) 2021-05-11 10:10:31 -07:00
readme.md
rules.mk Remove audio pin references in rules.mk (#14532) 2021-09-21 20:04:03 +10:00

readme.md

Levinson

A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, Elite-C
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make keebio/levinson/rev3:default

Example of flashing this keyboard with Pro micro:

make keebio/levinson/rev3:default:avrdude

Example of flashing this keyboard with Elite-C:

You'll need to add BOOTLOADER = atmel-dfu to your rules.mk to ensure that resetting the board works properly.

Hold the reset button on the Elite-C board, or the reset button on the keyboard if already assembled, then release the button and run:

make keebio/levinson/rev3:default:dfu

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Levinson Build Guide