History

fauxpark 9bb4e63a11 Remove old promicro_bootloader_jmp() declarations (#6444 )		2019-08-21 02:05:08 +01:00
..
keymaps	Update gaming layout (#6504 )	2019-08-07 05:56:03 -07:00
rev1	Remove old promicro_bootloader_jmp() declarations (#6444 )	2019-08-21 02:05:08 +01:00
rev2	Remove old promicro_bootloader_jmp() declarations (#6444 )	2019-08-21 02:05:08 +01:00
rev3	Remove old promicro_bootloader_jmp() declarations (#6444 )	2019-08-21 02:05:08 +01:00
config.h	[Keyboard] Move Keebio boards to own folder (#5109 )	2019-02-12 16:57:24 -08:00
info.json	[Keyboard] Move Keebio boards to own folder (#5109 )	2019-02-12 16:57:24 -08:00
levinson.c	[Keyboard] Move Keebio boards to own folder (#5109 )	2019-02-12 16:57:24 -08:00
levinson.h	[Keyboard] Add Levinson Rev 3 (#6064 )	2019-06-03 23:26:34 -07:00
readme.md	[Keyboard] Move Keebio boards to own folder (#5109 )	2019-02-12 16:57:24 -08:00
rules.mk	[Keyboard] Move Keebio boards to own folder (#5109 )	2019-02-12 16:57:24 -08:00

readme.md

Levinson

A split 40% split 4x12 ortholinear keyboard made and sold by Keebio. It's essentially a Let's Split with LED backlight support and 2u thumb key support. More info at Keebio.

Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro, Elite-C
Hardware Availability: Keebio

Make example for this keyboard (after setting up your build environment):

make levinson/rev2:default

Example of flashing this keyboard with Pro micro:

make levinson/rev2:default:avrdude

Example of flashing this keyboard with Elite-C:

You'll need to add BOOTLOADER = atmel-dfu to your rules.mk to ensure that resetting the board works properly.

Hold the reset button on the Elite-C board, or the reset button on the keyboard if already assembled, then release the button and run:

make levinson/rev2:default:dfu

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

A build guide for this keyboard can be found here: Levinson Build Guide