qmk-dactyl-manuform-a/keyboards/rgbkb/zygomorph
ridingqwerty d2e1cc4d48
Trim firmware sizes from default rules.mk, part 3 (#8045)
2020-01-30 11:13:49 -08:00
..
common [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
keymaps [Keymap] Xulkal user changes (#6044) 2019-06-01 14:39:31 -07:00
rev1 Enforce definition of `DIODE_DIRECTION` for non-custom matrix boards (#7915) 2020-01-19 14:11:57 +11:00
config.h [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
readme.md [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
rules.mk Trim firmware sizes from default rules.mk, part 3 (#8045) 2020-01-30 11:13:49 -08:00
zygomorph.c [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00
zygomorph.h [Keyboard] Create RGBKB Folder (#5858) 2019-05-14 11:58:56 -07:00

readme.md

Zygomorph

Zygomorph

Zygomorph is the thinnest keyboard with a fully enclosed case. It's only 3.2mm thick below the switches, including screws. It can be used in 5x6 and 4x6 split, or 5x12 and 4x12 combined. It has per-key RGB, supports Kailh Choc and MX switches, and has 10 rotary encoder positions per half (only one can be used per half). The board has pre-soldered components, including type C ports and ATmega32U4. The build guide can be found here.

Keyboard Maintainer: Legonut
Hardware Supported: Zygomorph R1.0
Hardware Availability: RGBKB

Make example for this keyboard (after setting up your build environment):

make rgbkb/zygomorph:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.