|
…
|
||
|---|---|---|
| .. | ||
| keymaps/default | ||
| config.h | ||
| readme.md | ||
| rules.mk | ||
| splittest.c | ||
| splittest.h | ||
readme.md
Split Tester
A two-switch tester built using two Pro Micros, mainly intended to test RGB on split keyboards. Seen here: https://www.instagram.com/p/BvCPNzynwrV/
Keyboard Maintainer: Bakingpy/nooges
Hardware Supported: Pro Micro
Make example for this keyboard (after setting up your build environment):
make handwired/splittest:default
Example of flashing this keyboard:
make handwired/splittest:default:avrdude
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.
Wiring
- Add switches to both Pro Micros across B3 and B6 pins
- Add pull-up resistor to left side between VCC and F6
- Add pull-down resistors to right side between GND and F6
- Connect the following pins on both sides together: D0, D1, GND, VCC
- Add I2C 4.7kOhm resistors between D0 and VCC, and D1 and VCC
- Wire Di of RGB strip for each half to D2