qmk-dactyl-manuform-a/keyboards/mxss

MxSS - Polycarb 65% Kit for MX/SMK

Information:

• Case: Frosted Polycarbonate, CNC milled
• Plate: Brass, mirror-finished and electroplated
• Weight: Same as plate
• PCB: Custom designed for the MxSS by kawasaki161, White solder mask and ENIG finish

Details:

• 2.9 degrees angle on the case
• Top mount plate
• Center USB, Type-B Mini
• MX and SMK (White and Orange) switch support
• Holtite support
• RGB underglow
• 1.5kg with plate and weight

Keyboard Maintainer: MxBlue

Hardware Supported: Custom PCB, ATMega32u4

Hardware Availability: https://geekhack.org/index.php?topic=94986.0

Make example for this keyboard (after setting up your build environment):

make mxss:default

See build environment setup then the make instructions for more information.

Front LED Operation

The MxSS PCB has 2 front RGB LEDs which has a separate brightness and mode of operation to the rest of the RGB LEDs. These are controlled through the supplied custom keycodes.

There are 3 modes of operation:

• FLED_OFF - Front LEDs stay off
• FLED_RGB - Front LEDs are part of the standard RGB LED modes, only works correctly with rainbow modes (will fix on request)
• FLED_INDI - Top front LED represents Caps Lock status, bottom LED represents current layer

Colors for FLED_INDI mode are hardcoded as hue/saturation values, the caps lock color can be found in mxss_frontled.h, the layer colors are defined in keymap.c (see default/keymap.c for example).

Custom Keycodes

• FLED_MOD - Cycle between the 3 modes (FLED_OFF -> FLED_RGB -> FLED_INDI)
• FLED_VAI - Increase front LED brightness
• FLED_VAD - Decrease front LED brightness

Further Notes

As SAFE_RANGE is used for defining the custom keycodes seen above, please use NEW_SAFE_RANGE as the starting value for any custom keycodes in keymap.c, as per the example.