qmk-dactyl-manuform-a/keyboards/handwired/magicforce61
Ryan 6b74e48f81
Remove audio pin references in rules.mk (#14532)
2021-09-21 20:04:03 +10:00
..
keymaps/default Add short aliases for Magic keycodes (#7541) 2019-12-05 00:44:39 -08:00
config.h Remove `DESCRIPTION`, H-J (#11616) 2021-01-20 00:38:12 +11:00
info.json Remove width, height and key_count from info.json (#14274) 2021-09-12 14:04:56 +10:00
magicforce61.c Remove empty override functions (#14312) 2021-09-05 21:36:31 +01:00
magicforce61.h handwired/magicforce61 Refactor (#5459) 2019-03-21 06:06:27 -07:00
readme.md handwired/magicforce61 Refactor (#5459) 2019-03-21 06:06:27 -07:00
rules.mk Remove audio pin references in rules.mk (#14532) 2021-09-21 20:04:03 +10:00

readme.md

Magicforce "61" Handwired

Basically I cut 7 keys off the magicforce68 and handwired everything to a teensy++ 2.0 to make it a ~60% board.

Keyboard Maintainer: The QMK Community
Hardware Supported: magicforce61, teensy++ 2.0

Make example for this keyboard (after setting up your build environment):

make handwired/magicforce61:default

Flash the firmware using the teensy loader or avrdude.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

Wiring Layout / Pinout

B5 B4 B3 B2 B1 B0 E7 E6 F0 F1 F2 F3 F4 F5
D0 Esc 1! 2@ 3# 4$ 5% 6^ 7& 8* 9( 0) -_ =+ Bspc
D1 Tab Q W E R T Y U I O P [{ ]} \|
D2 Caps A S D F G H J K L ;: '" Ent
D3 LSft Z X C V B N M , . / RSft
D4 LCtl LGUI LAlt Spc RAlt RGUI App RCtl

The following pins are used:

#define MATRIX_ROW_PINS { D0, D1, D2, D3, D4 }
#define MATRIX_COL_PINS { B5, B4, B3, B2, B1, B0, E7, E6, F0, F1, F2, F3, F4, F5 }