* 4x4 - pro micro version * pro-micro setup on 4x4 * tap dance LCTL/RESET key * remove test file * more research * revert a couple un-intended edits * opt_defs version of adding custom rules.mk variables * cleanup * cleanup * cleanup * cleanup * layout edits * layout edits * keymap edit * numpad layout change * got tap dance layer-switch working * keymap changes * temporary revert * restore previous settings * misc fixes * layer order change * fix layout matrix * Update tapdances.c |
||
---|---|---|
.. | ||
config.h | ||
keymap.c | ||
readme.md | ||
rules.mk |
readme.md
Let's Split Flashing
(More information at qmk_firmware/layouts/community/ortho_3x10/wanleg/readme.md
)
Make the QMK DFU .hex
make lets_split/rev2:wanleg:production dfu=qmk
Burning EEPROM settings and Firmware
Navigate to the directory with your .hex file and the eeprom-lefthand.eep
and eeprom-righthand.eep
files in it.
Burn Left Side With QMK DFU and Firmware
avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-lefthand.eep -P comPORT -U flash:w:YOUR_production.hex:a
Burn Right Side With QMK DFU and Firmware
avrdude -b 19200 -c avrisp -p m32u4 -v -e -U lock:w:0x3F:m -U efuse:w:0xC3:m -U hfuse:w:0xD9:m -U lfuse:w:0x5E:m -U eeprom:w:eeprom-righthand.eep -P comPORT -U flash:w:YOUR_production.hex:a
Change comPORT
to whatever port is used by the Arduino (e.g. com11
in Windows or /dev/ttyACM0
in Linux). Use Device Manager in Windows to find the port being used. Use ls /dev/tty*
in Linux. Change YOUR_production.hex
to whatever you've created in the previous step.
Using QMK DFU
Once QMK DFU is burned to your ProMicro, you can then flash subsequent hex files with
make lets_split/rev2:<keymap>:dfu dfu=qmk
The dfu=qmk
conditional will set BOOTLOADER = qmk-dfu
instead of BOOTLOADER = caterina
Let's Split LEDs
In qmk_firmware/keyboards/lets_split/rev2/rev2.c
, replace contents with
#include "lets_split.h"
#ifdef SSD1306OLED
void led_set_kb(uint8_t usb_led) {
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
led_set_user(usb_led);
}
#endif
void matrix_init_kb(void) {
// // green led on
// DDRD |= (1<<5);
// PORTD &= ~(1<<5);
// // orange led on
// DDRB |= (1<<0);
// PORTB &= ~(1<<0);
//turn off LEDs on ProMicro
DDRD &= ~(1<<5);
PORTD &= ~(1<<5);
DDRB &= ~(1<<0);
PORTB &= ~(1<<0);
matrix_init_user();
};
to turn off LEDs