History

Erick Ozaki 243764b83d Keymap: Custom L0 layout for ergodone (#3591 )		2018-08-09 18:09:43 -07:00
..
keymaps	Keymap: Custom L0 layout for ergodone (#3591 )	2018-08-09 18:09:43 -07:00
config.h	ErgoDone: VID/PID/NKRO (#1872 )	2017-10-21 10:00:41 -10:00
ergodone.c	Update ergodone.c	2018-01-12 13:24:30 -05:00
ergodone.h	Configurator layout repair for Ergodone, Ergodox Infinity and ErgoTravel (#3173 )	2018-06-13 07:58:23 -07:00
expander.c	…
expander.h	…
i2cmaster.h	…
info.json	Add 80 key layout to Ergodone, as it appears to support it (#2984 )	2018-05-20 21:45:38 -07:00
matrix.c	…
readme.md	Fix hyperlinks in ErgoDone readme.md (#3323 )	2018-07-05 18:34:04 -07:00
rules.mk	Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency	2018-03-16 16:33:43 -04:00
twimaster.c	…

readme.md

ErgoDone

The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy.

Keyboard maintainer: Yu He
Hardware supported:
- ErgoDone v1.3 (tested)
Hardware availability:
- AliExpress
- KBDfans

Building the firmware

Install the build tools.

In the root directory of the repository, build the firmware with a command like:

make ergodone:default

For more information on the layout option and other ones, see the make guide.

Flashing the firmware onto the keyboard

The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox.

To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard.
To flash the .hex file, use the hid_bootloader_cli utlity from the TKG Toolkit (as of 2017-10-03, only this old version works under Windows):
```
hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex
```