qmk-dactyl-manuform-a/keyboards/peiorisboards/ixora
James Young 26eef35f07
2020 February 29 Breaking Changes Update (#8064)
2020-02-29 11:59:30 -08:00
..
boards/GENERIC_STM32_F042X6 2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
keymaps [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
bootloader_defs.h [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
chconf.h 2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
config.h Remove all references to "CUSTOM_MATRIX" as a diode direction (#7937) 2020-01-19 23:05:51 -08:00
halconf.h 2020 February 29 Breaking Changes Update (#8064) 2020-02-29 11:59:30 -08:00
info.json [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
ixora.c [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
ixora.h [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
mcuconf.h [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
readme.md [Keyboard] Add Ixora keypad (#5931) 2019-05-21 10:49:33 -07:00
rules.mk Move CORTEX_ENABLE_WFI_IDLE=TRUE to rules.mk files. 2020-01-28 23:45:42 +11:00

readme.md

Ixora

Ixora

Ixora is an ARM-powered 6-key macropad with a USB connector, hotswap sockets, and indicator LEDs.

Keyboard Maintainer: Peioris
Hardware Supported: Ixora PCB
Hardware Availability: Peioris

Make example for this keyboard (after setting up your build environment):

make peiorisboards/ixora:default:dfu-util

See build environment setup then the make instructions for more information.

Developer's Note

STM32F042xx chips does not allow jumping to bootloader without BOOT0 being set to high, therefore it is impossible to enter the bootloader from sending a RESET keycode nor using bootmagic or bootmagic lite.
The only way to enter bootloader is to hold the BOOT0 button while the keyboard is powering up or after a power reset (done by pressing the reset switch or sending a RESET keycode).