qmk-dactyl-manuform-a/keyboards/xelus/valor/rev2/config.h

89 lines
2.5 KiB
C

/* Copyright 2021 Harrison Chan (Xelus)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x5845 // "XE"
#define PRODUCT_ID 0x5653 // Valor "VR" + 1
#define DEVICE_VER 0x0001
#define MANUFACTURER Xelus
#define PRODUCT Xelus Valor Rev2
/* key matrix size */
#define MATRIX_ROWS 5
#define MATRIX_COLS 15
/* key matrix pins */
#define MATRIX_ROW_PINS { B11, B10, A3, A1, A2 }
#define MATRIX_COL_PINS { B2, B1, B0, A7, A6, A5, A4, A13, B7, B6, B5, B4, B3, A15, A14 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
// I2C setup
#define I2C1_SCL 8
#define I2C1_SDA 9
#define I2C1_SCL_PAL_MODE 4
#define I2C1_SDA_PAL_MODE 4
#define I2C1_TIMINGR_PRESC 0U
#define I2C1_TIMINGR_SCLDEL 11U
#define I2C1_TIMINGR_SDADEL 0U
#define I2C1_TIMINGR_SCLH 14U
#define I2C1_TIMINGR_SCLL 42U
// I2C EEPROM
#define EEPROM_I2C_24LC64
// More EEPROM for layers
#define DYNAMIC_KEYMAP_EEPROM_MAX_ADDR 8191
/* RGB Matrix */
#define RGB_DI_PIN A9
#define RGBLED_NUM 28
#define DRIVER_LED_TOTAL 28
#define NOP_FUDGE 0.4
// RGB PWM
#define WS2812_PWM_DRIVER PWMD1
#define WS2812_PWM_CHANNEL 2
#define WS2812_PWM_PAL_MODE 1
#define WS2812_DMA_STREAM STM32_DMA1_STREAM6
#define WS2812_DMA_CHANNEL 7
#define WS2812_DMAMUX_ID STM32_DMAMUX1_TIM1_UP
// RGB Pullup
#define WS2812_EXTERNAL_PULLUP
// RGB Matrix settings
#define RGB_MATRIX_FRAMEBUFFER_EFFECTS
#define RGB_MATRIX_KEYPRESSES
#define RGB_MATRIX_MAXIMUM_BRIGHTNESS 200
#define RGB_DISABLE_WHEN_USB_SUSPENDED
#define RGB_MATRIX_STARTUP_MODE RGB_MATRIX_CUSTOM_test_mode