qmk-dactyl-manuform-a/keyboards/tada68
Evan 3c224bffc8 Add personal Tada68 Keymap (#2633)
* Add personal Tada68 keymaps

* remove uneccessary tada68 folder

* recommit with temp name

* remove bad folder name

* fix bullet list format

* rename to fezzant

* remove unnecessary config.h file
2018-04-21 13:37:26 -07:00
..
keymaps Add personal Tada68 Keymap (#2633) 2018-04-21 13:37:26 -07:00
config.h
info.json Remove bootloader from info.jsons 2018-04-11 21:32:09 -07:00
readme.md Fixed dead links (#2451) 2018-03-01 07:45:47 -08:00
rules.mk
tada68.c
tada68.h

readme.md

TADA68

A compact 65% keyboard.

Keyboard Maintainer: QMK Community Hardware Supported: TADA68 PCB Hardware Availability: kbdfans kbdist

Make example for this keyboard (after setting up your build environment):

make tada68:default:bin

See build environment setup then the make instructions for more information.

Flashing Instructions

*Read all the instructions, there are a few warnings of things to avoid doing to avoid bricking your Tada68. _It is much too easy to do! _

  1. from the qmk_firmware\ directory run:
$ make tada68:default:flashbin
  1. Connect your keyboard to Windows computer, hit the reset button on the TADA, the lights will start flashing.

  2. You'll see a new drive on your computer called TADA68. Backup the original factory FLASH.BIN file thats inside it.

  3. Delete FLASH.BIN from the TADA drive and copy tada68_default.bin that was generated at the root of the qmk directory into the TADA drive.

  4. Do not eject the USB device. Hit ESC on the keyboard. The lights will stop flashing and your firmware is loaded!