qmk-dactyl-manuform-a/keyboards/hhkb/jp/config.h

92 lines
2.7 KiB
C

/*
Copyright 2012 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x4848 // HH = happy hacking
#define PRODUCT_ID 0x0002 // HHKB JP
#define DEVICE_VER 0x0104
#define MANUFACTURER q.m.k
#define PRODUCT HHKB mod
/* key matrix size */
#define MATRIX_ROWS 16
#define MATRIX_COLS 8
#define TAPPING_TERM 200
/* number of backlight levels */
#define BACKLIGHT_LEVELS 3
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
#ifdef HHKB_RN42_ENABLE
// rn42 support -- acquired from the tmk repo. This is almost certainly not
// integrated with qmk in the correct way.
#define SUART_OUT_PORT PORTD
#define SUART_OUT_BIT 0
#define SUART_IN_PIN PIND
#define SUART_IN_BIT 1
#define SERIAL_UART_BAUD 115200
#define SERIAL_UART_INIT_CUSTOM \
/* RX interrupt, RX: enable */ \
UCSR1B |= (1<<RXCIE1) | (1<<RXEN1); \
/* TX interrupt, TX: enable */ \
UCSR1B |= (0<<TXCIE1) | (1<<TXEN1); \
/* parity: none(00), even(01), odd(11) */ \
UCSR1C |= (0<<UPM11) | (0<<UPM10); \
/* RTS, CTS(no flow control by hardware) */ \
UCSR1D |= (0<<RTSEN) | (0<<CTSEN); \
/* RTS for flow control by firmware */ \
DDRD |= (1<<5); PORTD &= ~(1<<5);
#define SERIAL_UART_RTS_LO() do { PORTD &= ~(1<<5); } while (0)
#define SERIAL_UART_RTS_HI() do { PORTD |= (1<<5); } while (0)
/* power control of key switch board */
#define HHKB_POWER_SAVING
#endif
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION