qmk-dactyl-manuform-a/keyboards/meira/lighting.c

98 lines
2.7 KiB
C
Executable File

#ifdef ISSI_ENABLE
#include <avr/sfr_defs.h>
#include <avr/timer_avr.h>
#include <avr/wdt.h>
#include "meira.h"
#include "issi.h"
#include "TWIlib.h"
#include "lighting.h"
#include "debug.h"
#include "audio/audio.h"
const uint8_t backlight_pwm_map[BACKLIGHT_LEVELS] = BACKLIGHT_PWM_MAP;
const uint8_t switch_matrices[] = {0, 1};
// Maps switch LEDs from Row/Col to ISSI matrix.
// Value breakdown:
// Bit | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
// | | ISSI Col | ISSI Row |
// / |
// Device
// const uint8_t switch_leds[MATRIX_ROWS][MATRIX_COLS] =
// KEYMAP(
// 0x29, 0x28, 0x27, 0x26, 0x25, 0x24, 0x23, 0x22, 0x21, 0xA9, 0xA8, 0xA7, 0xA6, 0xA5,
// 0x39, 0x38, 0x37, 0x36, 0x35, 0x34, 0x33, 0x32, 0x31, 0xB9, 0xB8, 0xB7, 0xB6, 0xB5,
// 0x49, 0x48, 0x47, 0x45, 0x44, 0x43, 0x42, 0x41, 0xC9, 0xC8, 0xC7, 0xC6,
// 0x59, 0x58, 0x57, 0x56, 0x55, 0x51, 0xD6, 0xE5, 0xE4, 0xE3, 0xE2);
void backlight_set(uint8_t level){
#ifdef BACKLIGHT_ENABLE
uint8_t pwm_value = 0;
if(level >= BACKLIGHT_LEVELS){
level = BACKLIGHT_LEVELS;
}
if(level > 0){
pwm_value = backlight_pwm_map[level-1];
}
xprintf("BACKLIGHT_LEVELS: %d\n", BACKLIGHT_LEVELS);
xprintf("backlight_set level: %d pwm: %d\n", level, pwm_value);
for(int x = 1; x <= 9; x++){
for(int y = 1; y <= 9; y++){
activateLED(switch_matrices[0], x, y, pwm_value);
activateLED(switch_matrices[1], x, y, pwm_value);
}
}
#endif
}
void set_backlight_by_keymap(uint8_t col, uint8_t row){
// dprintf("LED: %02X, %d %d %d\n", lookup_value, matrix, led_col, led_row);
// activateLED(matrix, led_col, led_row, 255);
}
void force_issi_refresh(){
issi_devices[0]->led_dirty = true;
update_issi(0, true);
issi_devices[3]->led_dirty = true;
update_issi(3, true);
}
void led_test(){
#ifdef WATCHDOG_ENABLE
// This test take a long time to run, disable the WTD until its complete
wdt_disable();
#endif
backlight_set(0);
force_issi_refresh();
// for(uint8_t x = 0; x < sizeof(rgb_sequence); x++){
// set_rgb(rgb_sequence[x], 255, 0, 0);
// force_issi_refresh();
// _delay_ms(250);
// set_rgb(rgb_sequence[x], 0, 255, 0);
// force_issi_refresh();
// _delay_ms(250);
// set_rgb(rgb_sequence[x], 0, 0, 255);
// force_issi_refresh();
// _delay_ms(250);
// set_rgb(rgb_sequence[x], 0, 0, 0);
// force_issi_refresh();
// }
#ifdef WATCHDOG_ENABLE
wdt_enable(WDTO_250MS);
#endif
}
void backlight_init_ports(void){
xprintf("backlight_init_ports\n");
issi_init();
}
#endif