qmk-dactyl-manuform-a/keyboards/exclusive/e6v2/le_bmc

E6-V2 Bootmapper Client (ps2avrgb) LE

These docs are for the BMC version of the E6-V2 PCB sold during Round 2 which has an atmega32a microcontroller. Please do not flash this .hex file on your atmega32u4 equipped E6-V2 or your E6V2 BMC from Round 1.

Keyboard Maintainer: MechMerlin
Hardware Supported: ps2avrgb E6-V2 with atmega32a microcontroller
Hardware Availability: geekhack.org/index.php?topic=90787.0

Make example for this keyboard (after setting up your build environment):

make exclusive/e6v2/le_bmc:default

Flashing

ps2avr(GB) boards use an atmega32a microcontroller and a different bootloader. It is not flashable using the regular QMK methods.

Reset Key: Hold down the key located at K00, commonly programmed as left control while plugging in the keyboard.

Windows:

1. Download HIDBootFlash.
2. Place your keyboard into reset.
3. Press the Find Device button and ensure that your keyboard is found.
4. Press the Open .hex File button and locate the .hex file you created.
5. Press the Flash Device button and wait for the process to complete.

macOS:

1. Install homebrew by typing the following:

   /usr/bin/ruby -e "$(curl -fsSL https://raw.githubusercontent.com/Homebrew/install/master/install)"
   

2. Install crosspack-avr.

   brew cask install crosspack-avr
   

3. Install the following packages:

   brew install python3
   pip3 install pyusb
   brew install --HEAD https://raw.githubusercontent.com/robertgzr/homebrew-tap/master/bootloadhid.rb
   

4. Place your keyboard into reset.
5. Flash the board by typing bootloadHID -r followed by the path to your .hex file.

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.