a03aa301de
* disambiguate Bootmagic rules in keymaps
The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic.
This commit edits the files to specify that full Bootmagic is intended.
* remove BOOTMAGIC_ENABLE=full setting
* unify commented BOOTMAGIC_ENABLE rules in keyboards
Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;#[ \t]*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).*;\1 = no # Virtual DIP switch configuration;g' {} +
```
* remove commented Bootmagic rules from keymap/user level
Command:
```
find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.*\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*/d' {} +
```
* update keyboard BOOTMAGIC_ENABLE rule formatting
Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later).
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
```
* update keyboards' BOOTMAGIC_ENABLE settings
Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Command:
```
find keyboards/ -type f -name 'rules.mk' -and -not -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' +
```
* update keymap/user BOOTMAGIC_ENABLE settings
Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' +
```
* remove and replace inline comments in keyboards and keymap/user files
Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`.
Commands:
```
find keyboards/ -type f -name 'rules.mk' -and -path '*/keymaps/*' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).*;\1 = \2;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' +
find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' +
```
* rename improperly named makefiles
Some files intended to be used as makefiles had improper names causing them to not be used as intended when building.
This commit corrects the filenames of the affected files.
* update renamed file with new rule formatting
* update QMK's template files
Updates QMK's `rules.mk` templates to use the new inline comment.
* update QMK Docs
- remove documentation of full Bootmagic
- update links to Bootmagic Lite doc
- add doc for Magic Keycodes
* rules.mk patch for coarse/ixora and coarse/vinta
|
||
|---|---|---|
| .. | ||
| keymaps | ||
| arrow_pad.c | ||
| arrow_pad.h | ||
| config.h | ||
| info.json | ||
| readme.md | ||
| rules.mk | ||
readme.md
arrow_pad keyboard firmware
Keyboard Info
The ArrowPad is a wired conversion that can be made to any stand-alone keypad. It uses two main layers - a standard numpad, and a more advanced arrow cluster navigator.
The first 24-key ArrowPad was handwired, but the PCB was wired as listed below.
<Chip Ref Des> pin <Pin #>
<Keycap Name> (Silkscreen Name if different) - <Switch Pin #>
Note:
U2 pin 2 is the Num Lock LED and is active low.
U2 pin 1
Clear (Num Lock) - 1
Enter - 2
Esc (ESC) - 2
U2 pin 3
- - 1
U2 pin 4
7 - 2
8 - 2
9 - 2
U2 pin 5
* - 2
Delete (BACK SPACE) - 2
U2 pin 6
1 - 2
0 - 2
. - 2
, - 2
U2 pin 7
4 - 2
5 - 2
6 - 2
U2 pin 8
Tab - 2
= (/) - 2
U2 pin 13
Delete (BACK SPACE) - 1
9 - 1
6 - 1
3 - 1
. - 1
U2 pin 14
Tab - 1
8 - 1
5 - 1
2 - 1
0 - 1
U2 pin 15
Esc (ESC) - 1
= (/) - 1
/ (*) - 1
7 - 1
4 - 1
1 - 1
+ - 1
U2 pin 16
Enter - 1
* (<--) - 1
, - 1
U2 pin 17
Fn (#NAME?) - 1
- - 2
Clear (Num Lock) - 2
U2 pin 18
Fn (#NAME?) - 2
* (<--) - 2
+ - 2
3 - 2
2 - 2
More info can be found on GeekHack
The second ArrowPad was a conversion from a 21-key Genovation keypad. It used a 2 row x 11 column matrix.
#define LAYOUT_pad21( \
KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
KM_NUM, KM_FSL, KM_AST, KM_MIN, \
KM___7, KM___8, KM___9, \
KM___4, KM___5, KM___6, KM_PLS, \
KM___1, KM___2, KM___3, \
KM___0, KM_DOT, KM_ENT \
) { \
{ KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \
{ KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO, KM___0, KM_DOT, }, \
}
Quantum MK Firmware
For the full Quantum feature list, see the parent readme.md.
Building
Download or clone the whole firmware and navigate to the keyboards/arrow_pad folder. Once your dev env is setup, you'll be able to type make to generate your .hex - you can then use the Teensy Loader to program your .hex file.
Depending on which keymap you would like to use, you will have to compile slightly differently.
Default
To build with the default keymap, simply run make handwired/arrow_pad:default.
Other Keymaps
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named <name>.c in the keymaps folder, and see keymap document (you can find in top readme.md) and existent keymap files.
To build the firmware binary hex file with a keymap just do make with a keymap like this:
$ make handwired/arrow_pad:[default|pad_21|pad_24|<name>]
Keymaps follow the format <name>.c and are stored in the keymaps folder.