qmk-dactyl-manuform-a/keyboards/massdrop/ctrl/config.h

122 lines
4.2 KiB
C

/*
Copyright 2015 Jun Wako <wakojun@gmail.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x04D8
#define PRODUCT_ID 0xEED2
#define DEVICE_VER 0x0101
#define MANUFACTURER "Massdrop Inc."
#define PRODUCT "CTRL Keyboard"
#define SERIAL_NUM "Unavailable"
/* key matrix size */
#define MATRIX_ROWS 11
#define MATRIX_COLS 8
/* MCU Port name definitions */
#define PA 0
#define PB 1
/* Port and Pin definition of key row hardware configuration */
#define MATRIX_ROW_PORTS PB, PB, PB, PB, PB, PB, PA, PA, PB, PB, PB
#define MATRIX_ROW_PINS 4, 5, 6, 7, 8, 9, 10, 11, 10, 11, 12
/* Port and Pin definition of key column hardware configuration */
#define MATRIX_COL_PORTS PA, PA, PA, PA, PA, PA, PA, PA
#define MATRIX_COL_PINS 0, 1, 2, 3, 4, 5, 6, 7
/* This Shift Register expands available hardware output lines to control additional peripherals */
/* It uses four lines from the MCU to provide 16 output lines */
/* Shift Register Clock configuration (MCU to ShiftRegister.RCLK) */
#define SR_EXP_RCLK_PORT PB
#define SR_EXP_RCLK_PIN 14
/* Shift Register Output Enable configuration (MCU to ShiftRegister.OE_N) */
#define SR_EXP_OE_N_PORT PB
#define SR_EXP_OE_N_PIN 15
/* SERCOM port to use for Shift Register SPI */
/* DATAOUT and SCLK must be configured to use hardware pins of this port */
#define SR_EXP_SERCOM SERCOM2
/* Shift Register SPI Data Out configuration (MCU.SERCOMx.PAD[0] to ShiftRegister.SER) */
#define SR_EXP_DATAOUT_PORT PA
#define SR_EXP_DATAOUT_PIN 12
#define SR_EXP_DATAOUT_MUX 2
/* Shift Register SPI Serial Clock configuration (MCU.SERCOMx.PAD[1] to ShiftRegister.SRCLK) */
#define SR_EXP_SCLK_PORT PA
#define SR_EXP_SCLK_PIN 13
#define SR_EXP_SCLK_MUX 2
/* Debug LED (Small LED Located near MCU) */
#define DEBUG_LED_ENABLE 1
#define DEBUG_LED_PORT PA
#define DEBUG_LED_PIN 27
/* Additional debugging ports */
/* PCB M21 */
#define DEBUG_PORT1_ENABLE 1
#define DEBUG_PORT1_PORT PB
#define DEBUG_PORT1_PIN 3
/* PCB M23 */
#define DEBUG_PORT2_ENABLE 1
#define DEBUG_PORT2_PORT PB
#define DEBUG_PORT2_PIN 17
/* PCB M25 */
#define DEBUG_PORT3_ENABLE 1
#define DEBUG_PORT3_PORT PA
#define DEBUG_PORT3_PIN 20
/* Debug Boot Tracing - During boot sequence, ground this pin to halt and display debug code using Debug LED */
/* This is useful in determining which hardware device may have malfunctioned or is improperly configured */
/* Feature is automatically disabled after successful boot */
/* PCB M27 */
#define DEBUG_BOOT_TRACING_ENABLE 1
#define DEBUG_BOOT_TRACING_PORT PB
#define DEBUG_BOOT_TRACING_PIN 23
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
#define DEBOUNCING_DELAY 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
//#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
//#define LOCKING_RESYNC_ENABLE
/* Force boot in NKRO mode */
//#define FORCE_NKRO
/*
* Feature disable options
* These options are also useful to firmware size reduction.
*/
/* disable debug print */
//#define NO_DEBUG
/* disable print */
//#define NO_PRINT
/* disable action features */
//#define NO_ACTION_LAYER
//#define NO_ACTION_TAPPING
//#define NO_ACTION_ONESHOT
//#define NO_ACTION_MACRO
//#define NO_ACTION_FUNCTION