History

James Young a03aa301de Remove Full Bootmagic (#13846 ) * disambiguate Bootmagic rules in keymaps The files edited by this commit were added at a point in time where `BOOTMAGIC_ENABLE = yes` enabled full Bootmagic. This commit edits the files to specify that full Bootmagic is intended. * remove BOOTMAGIC_ENABLE=full setting * unify commented BOOTMAGIC_ENABLE rules in keyboards Explicitly sets `BOOTMAGIC_ENABLE = no` in keyboards where the rule was commented out. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-zA-Z]\+\).;\1 = no # Virtual DIP switch configuration;g' {} + ``` * remove commented Bootmagic rules from keymap/user level Command: ``` find keyboards/ layouts/ users/ -type f -name 'rules.mk' -exec sed -i -e '/#.\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\)./d' {} + ``` * update keyboard BOOTMAGIC_ENABLE rule formatting Sets the formatting of BOOTMAGIC_ENABLE rules to `BOOTMAGIC_ENABLE = [value]`, without the inline comments (which will be replaced later). Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + ``` update keyboards' BOOTMAGIC_ENABLE settings Updates keyboard `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = \)full;\1lite;g' '{}' + ``` * update keymap/user BOOTMAGIC_ENABLE settings Updates keymap/user `rules.mk` files to use `BOOTMAGIC_ENABLE = lite` where `BOOTMAGIC_ENABLE = full` was being used. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE[ \t=]\+\)full;\1lite;g' '{}' + ``` * remove and replace inline comments in keyboards and keymap/user files Removes and replaces the inline comments, which have been updated to read `Enable Bootmagic Lite`. Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -path '/keymaps/' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE\)[ \t=]\+\([a-z]\+\).;\1 = \2;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = lite\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = yes\);\1 # Enable Bootmagic Lite;g' '{}' + find keyboards/ layouts/community/ users/ -type f -name 'rules.mk' -exec sed -i -e 's;\(BOOTMAGIC_ENABLE = no\);\1 # Enable Bootmagic Lite;g' '{}' + ``` * rename improperly named makefiles Some files intended to be used as makefiles had improper names causing them to not be used as intended when building. This commit corrects the filenames of the affected files. * update renamed file with new rule formatting * update QMK's template files Updates QMK's `rules.mk` templates to use the new inline comment. * update QMK Docs - remove documentation of full Bootmagic - update links to Bootmagic Lite doc - add doc for Magic Keycodes * rules.mk patch for coarse/ixora and coarse/vinta		2021-08-06 23:59:56 -07:00
..
config.h	…
keymap.c	…
readme.md	…
rules.mk	…

readme.md

gunp layout for Planck keyboards

Layout Maintainer: Gun Pinyo

This is my personal layout for Planck keyboards. Almost all of important information is already in the picture of the cheat sheet above. There is also a text-version of this cheat sheet at the end of this readme file. If both of them are not the same, then please trust the text-version more because the picture is just a screenshot of the text.

The base layer is LY-0000. Next, we custom keycodes called FuncA, FuncB, FuncC, and FuncD (FuncX for short) which will switch to layout LY-ABCD depending on the binary state of each FuncX where the corresponded binary digit is a boolean "keycode FuncX is currently being pressed". This mechanism allows us to access up to 16 different layers, however, only some of them have been used. A layer matches regex LY-.... is currently used if and only if the cheat sheet mentions it.

Once each of these non-based layers activates (by a combination of FuncX keycodes):

the left-half (rows 0-3, columns 0-5) will switch according to its individual keymap on cheat sheet,
the right-half (rows 0-3, columns 6-11) will switch to the RIGHT-HALF keymap such that keycodes that matches the regex (L....|Thai[ABC]) are disabled and (partially) being replaced by FuncX keycodes on the same position of the base layer and keycodes in binary numbers there are disabled.

Another keycode in the base layer is Stick. When it is press, the rules of keyboard change into persistent mode. Here, the right-half is exactly the RIGHT-HALF keymap in the cheat sheet. Keycodes in left-half are all no-op initially and can be changed to other layers by tapping on the corresponded keycodes (L....|Thai[ABC]). To switch back to the normal rules governed by FuncX press a Relax keycode.

Remark:

Layers LY-Thai[ABC] are only accessible via persistent mode.
This layout doesn't employ any transparent keycode, therefore, empty keycodes (including dummy keycodes XXX) are all no-op.
Prefixes S-, C-, A-, and G- are combinators for sft-🠜, ctl-🠜, alt-🠜, and gui-🠜, respectively.
All keycodes that starts with a capital letter are custom keycodes. Except single letters which stand for their alphabet.
There is a conflict with dynamic macro (QMK's feature) with my layer switching mechanisms, so I disable it but keep its keycodes there for later implementation.

  {H| "LY-0000": base-layer -- "`[🠝]` here becomes `FuncD` in other layers" |H}   {H| "RIGHT-HALF":  "when `Stick` is on" |H}
  {8| pgup|  Q  |  W  |  F  |  P  |  G  |  J  |  L  |  U  |  Y  |  K  | tab |8}   {8| L0110| [🠜] |bkspc| [🠞] | XXX | XXX  |8}
  {8| pgdn|  A  |  R  |  S  |  T  |  D  |  H  |  N  |  E  |  I  |  O  |Stick|8}   {8| L1111|ThaiA|ThaiB|ThaiC| XXX | XXX  |8}
  {8|sft-🠜|  Z  |  X  |  C  |  V  |  B  |  M  |FuncA|FuncB|FuncC| [🠝] |sft-🠞|8}   {8| L0100|L1000|L1010|L0010|Relax|sft-🠞 |8}
  {8|ctl-🠜|alt-🠜|gui-🠜| esc |bkspc|enter|FuncD|space|print| [🠜] | [🠟] | [🠞] |8}   {8| Relax|space|enter|gui-🠞|alt-🠞|ctl-🠞 |8}

  {H| "LY-0100": "col0 as no-op" |H}   {H|  "LY-1101" -- "Email: gunpinyo@gmail.com"  |H}   {x|  "LY-0110" -- "gunpinyo"  |x}
  {8| C-G  home  [🠝]  end  C-[🠝] |8}   {8| Sandbox XXX AudTog KeyLock RgbTog QmkReset |8}   {✜| S-f7 S-f8  f7 f8 f9  S-f9 |✜}
  {8| pgup  [🠜]  [🠟]  [🠞]  C-[🠟] |8}   {8| wake  caplock MyName Email RgbMod QmkDebug |8}   {✜| S-f4 S-f5  f4 f5 f6  S-f6 |✜}
  {8| pgdn  C-S  C-A  C-Z  SC-Z  |8}   {8| sleep numlock DmRec1 DmPlay1 XXX QmkEepRst |8}   {✜| S-f1 S-f2  f1 f2 f3  S-f3 |✜}
  {8|     C-[🠜]  C-F  C-[🠞]      |8}   {8| power scrlock DmRec2 DmPlay2 DmStop insert |8}   {✜|S-f10 S-f11 f10f11f12 S-f12|✜}

  {8|    "LY-1000"    |8}   {8|    "LY-1010"    |8}   {8|    "LY-0010"    |8}   {H| "LY-1111" - "powered by QMK firmware" |H}
  {H|  %  ?  !  `     |H}   {H|  #  7  8  9     |H}   {H|  &  |  ~  ^     |H}   {8| msAC1 msAC0  scr-🠜 mov-🠝 scr-🠞  scr-🠝 |8}
  {H|  @  ,  .  '  =  |H}   {H|  *  4  5  6  +  |H}   {H|  {  [  (  <  /  |H}   {8| msAC2  XXX   mov-🠜 mov-🠟 mov-🠞  scr-🠟 |8}
  {H|  $  ;  : \"  _  |H}   {H|  0  1  2  3  -  |H}   {H|  }  ]  )  >  \  |H}   {8| mPrev btn-🠝  mRWD  mPlay mFFD   btn-✜ |8}
                                                                                {8| mNext btn-🠟  pause mStop btn-🠜  btn-🠞 |8}
  1. evdev pc105 (US: qwerty, TH: kedmanee)    5. "LY-1110" is `G-`+"LY-0110"
  2. `G-space` is used to switch XKB layout    6. "LY-1100" is `S-`+"LY-0100" except [C-S, C-A, C-Z, SC-Z, C-F] which become
  3. when `Stick` is off, layer switchers other than `FuncX` are disabled       [C-X, C-C, C-V,  C-L, C-R] respectively
  4. ["LY-1000", "LY-1010", "LY-0010"] omit col0 and row3, but they have all `mod-🠜` from the base-layer, the rest are no-op

  {H| "LY-0001" -- "`mod#🠜` is oneshot-mod" |H}   {8|    "LY-ThaiA"   |8}   {8|    "LY-ThaiB"   |8}   {8|    "LY-ThaiC"   |8}
  {8|  C-H C-0  SC-pgup bri-🠝 SC-pgdn vol-🠝 |8}   {H|  ฌ ‍‍‍ฅ ‍ค  ม ฤ ฦ  |H}   {H|  ์ ‍‍‍‍‍็  ่  ้  ๊  ๋  |H}   {H|  ภ ‍‍ฃ ‍ข  ฮ ‍‍‍ฎ ‍‍ฏ  |H}
  {8| SC-T C-[+] C-pgup bri-🠟  C-pgdn vol-🠟 |8}   {H|  ณ ‍ว ‍‍‍‍‍ง  ‍น ‍‍ร ‍ล  |H}   {H|  โ ‍แ ‍‍‍‍‍‍‍‍‍‍‍เ ‍‍‍‍‍‍‍‍‍‍‍‍‍า ‍‍‍‍‍‍‍‍‍‍‍‍‍ั ‍‍‍‍‍‍‍‍ะ  |H}   {H|  ถ ‍‍‍‍จ ‍‍‍ก  อ ‍‍‍ด ‍‍ต  |H}
  {8| sft#🠜 C-[-]  A-[🠜]  C-T  A-[🠞]  vol-✜ |8}   {H|  ญ ‍‍ธ ‍‍‍ท  ย ช‍‍‍‍‍‍‍‍‍‍‍‍‍ซ  |H}   {H|  ใ ‍‍‍ไ ‍‍‍‍‍‍‍‍‍‍‍‍ิ ‍‍‍‍‍‍ี ‍‍‍‍‍‍‍‍‍‍‍ึ ‍‍‍‍‍ื  |H}   {H|  ศ ‍ษ ‍‍ส  ห ‍บ ป  |H}
  {8| ctl#🠜 alt#🠜  gui#🠜  C-W  delete  menu |8}   {H|  ฒ ฆ ฑ ‍‍‍‍‍‍‍‍‍‍ฬ พ‍‍‍‍‍‍‍‍‍‍‍ฟ  |H}   {H|  ‍‍‍‍ๅ ‍‍‍‍‍‍‍ฺ  ํ  ำ  ุ ‍‍‍‍‍‍‍‍‍‍ู  |H}   {H|  ฯ ‍‍ๆ ‍‍‍‍ฐ  ฉ ‍‍‍ผ ‍ฝ  |H}