qmk-dactyl-manuform-a/keyboards/handwired/tractyl_manuform/tractyl_manuform.c

204 lines
6.5 KiB
C

/* Copyright 2020 Christopher Courtney <drashna@live.com> (@drashna)
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "tractyl_manuform.h"
#include "transactions.h"
#include <string.h>
#include "drivers/sensors/pmw3360.h"
#ifndef TRACKBALL_DPI_OPTIONS
# define TRACKBALL_DPI_OPTIONS \
{ 1200, 1600, 2400 }
# ifndef TRACKBALL_DPI_DEFAULT
# define TRACKBALL_DPI_DEFAULT 1
# endif
#endif
#ifndef TRACKBALL_DPI_DEFAULT
# define TRACKBALL_DPI_DEFAULT 0
#endif
keyboard_config_t keyboard_config;
uint16_t dpi_array[] = TRACKBALL_DPI_OPTIONS;
#define DPI_OPTION_SIZE (sizeof(dpi_array) / sizeof(uint16_t))
bool BurstState = false; // init burst state for Trackball module
uint16_t MotionStart = 0; // Timer for accel, 0 is resting state
__attribute__((weak)) void process_mouse_user(report_mouse_t* mouse_report, int8_t x, int8_t y) {
mouse_report->x = x;
mouse_report->y = y;
}
__attribute__((weak)) kb_pointer_data_t process_mouse(void) {
kb_pointer_data_t temp_data = {.mouse_x = 0, .mouse_y = 0};
report_pmw_t data = pmw_read_burst();
// Reset timer if stopped moving
if (!data.isMotion) {
if (MotionStart != 0) MotionStart = 0;
return temp_data;
}
if (data.isOnSurface) {
// Set timer if new motion
if (MotionStart == 0) {
if (debug_mouse) dprintf("Starting motion.\n");
MotionStart = timer_read();
}
if (debug_mouse) { dprintf("Delt] d: %d t: %u\n", abs(data.dx) + abs(data.dy), MotionStart); }
if (debug_mouse) { dprintf("Pre ] X: %d, Y: %d\n", data.dx, data.dy); }
#if defined(PROFILE_LINEAR)
float scale = float(timer_elaspsed(MotionStart)) / 1000.0;
data.dx *= scale;
data.dy *= scale;
#elif defined(PROFILE_INVERSE)
// TODO
#else
// no post processing
#endif
// Wrap to HID size
data.dx = constrain(data.dx, -127, 127);
data.dy = constrain(data.dy, -127, 127);
if (debug_mouse) dprintf("Cons] X: %d, Y: %d\n", data.dx, data.dy);
// dprintf("Elapsed:%u, X: %f Y: %\n", i, pgm_read_byte(firmware_data+i));
temp_data.mouse_x = -data.dx;
temp_data.mouse_y = data.dy;
}
return temp_data;
}
bool process_record_kb(uint16_t keycode, keyrecord_t* record) {
if (!process_record_user(keycode, record)) { return false; }
#ifdef POINTING_DEVICE_ENABLE
if (keycode == DPI_CONFIG && record->event.pressed) {
if ((get_mods() | get_oneshot_mods()) & MOD_MASK_SHIFT) {
keyboard_config.dpi_config = (keyboard_config.dpi_config - 1) % DPI_OPTION_SIZE;
} else {
keyboard_config.dpi_config = (keyboard_config.dpi_config + 1) % DPI_OPTION_SIZE;
}
eeconfig_update_kb(keyboard_config.raw);
trackball_set_cpi(dpi_array[keyboard_config.dpi_config]);
}
#endif
/* If Mousekeys is disabled, then use handle the mouse button
* keycodes. This makes things simpler, and allows usage of
* the keycodes in a consistent manner. But only do this if
* Mousekeys is not enable, so it's not handled twice.
*/
#ifndef MOUSEKEY_ENABLE
if (IS_MOUSEKEY_BUTTON(keycode)) {
report_mouse_t currentReport = pointing_device_get_report();
if (record->event.pressed) {
currentReport.buttons |= 1 << (keycode - KC_MS_BTN1);
} else {
currentReport.buttons &= ~(1 << (keycode - KC_MS_BTN1));
}
pointing_device_set_report(currentReport);
pointing_device_send();
}
#endif
return true;
}
__attribute__((weak)) void keyboard_pre_init_sync(void) {}
// Hardware Setup
void keyboard_pre_init_kb(void) {
// debug_enable = true;
// debug_matrix = true;
// debug_mouse = true;
// debug_encoder = true;
/* Ground all output pins connected to ground. This provides additional
* pathways to ground. If you're messing with this, know this: driving ANY
* of these pins high will cause a short. On the MCU. Ka-blooey.
*/
// This is the debug LED.
#if defined(DEBUG_LED_PIN)
setPinOutput(DEBUG_LED_PIN);
writePin(DEBUG_LED_PIN, debug_enable);
#endif
keyboard_pre_init_sync();
keyboard_pre_init_user();
}
#ifdef POINTING_DEVICE_ENABLE
void pointing_device_init(void) {
if (!is_keyboard_left()) {
// initialize ball sensor
pmw_spi_init();
}
trackball_set_cpi(dpi_array[keyboard_config.dpi_config]);
}
void pointing_device_task(void) {
report_mouse_t mouse_report = pointing_device_get_report();
kb_pointer_data_t data = {.mouse_x = mouse_report.x, .mouse_y = mouse_report.y};
if (is_keyboard_left()) {
if (is_keyboard_master()) {
data = kb_pointer_sync_get();
process_mouse_user(&mouse_report, data.mouse_x, data.mouse_y);
}
} else {
data = process_mouse();
if (!is_keyboard_master()) {
kb_pointer_sync_send(data.mouse_x, data.mouse_y);
} else {
process_mouse_user(&mouse_report, data.mouse_x, data.mouse_y);
}
}
pointing_device_set_report(mouse_report);
pointing_device_send();
}
#endif
void eeconfig_init_kb(void) {
keyboard_config.dpi_config = TRACKBALL_DPI_DEFAULT;
#ifdef POINTING_DEVICE_ENABLE
trackball_set_cpi(dpi_array[keyboard_config.dpi_config]);
#endif
eeconfig_update_kb(keyboard_config.raw);
eeconfig_init_user();
}
__attribute__((weak)) void matrix_init_sub_kb(void) {}
void matrix_init_kb(void) {
// is safe to just read DPI setting since matrix init
// comes before pointing device init.
keyboard_config.raw = eeconfig_read_kb();
if (keyboard_config.dpi_config > DPI_OPTION_SIZE) { eeconfig_init_kb(); }
matrix_init_sub_kb();
matrix_init_user();
}
__attribute__((weak)) void matrix_scan_sub_kb(void) {}
void matrix_scan_kb(void) {
matrix_scan_sub_kb();
matrix_scan_user();
}
#ifdef POINTING_DEVICE_ENABLE
void matrix_power_up(void) { pointing_device_task(); }
#endif