andrejl
/
qmk-dactyl-manuform-a
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
qmk-dactyl-manuform-a/keyboards/geekboards/macropad_v2
History
Ryan 9dcd03b6ca
Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 
* Set bootloader to stm32-dfu for STM32F303

* Set bootloader to stm32-dfu for STM32F0x2

* Set bootloader to stm32-dfu for STM32F4x1

* Set bootloader to stm32duino for sowbug

* Delete redundant bootloader_defs headers

* Add some missing MCU name comments

* Move APM32 dfu-suffix overrides underneath bootloader

* Remove redundant STM32_BOOTLOADER_ADDRESS defines/rules
 		2021-06-08 19:48:46 +10:00
..
keymaps Normalise include statements in keyboard code (#11185) 2020-12-16 14:27:23 +11:00
chconf.h ChibiOS conf migrations... take 11 (#11646) 2021-01-21 17:00:53 +11:00
config.h [Keyboard] Geekboards Macropad V2 keyboard (#11045) 2020-12-08 15:58:32 -08:00
halconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
info.json [Keyboard] Geekboards Macropad V2 keyboard (#11045) 2020-12-08 15:58:32 -08:00
macropad_v2.c [Keyboard] Geekboards Macropad V2 keyboard (#11045) 2020-12-08 15:58:32 -08:00
macropad_v2.h [Keyboard] Geekboards Macropad V2 keyboard (#11045) 2020-12-08 15:58:32 -08:00
mcuconf.h Fix up comments showing how to execute config migration. (#11621) 2021-01-20 02:19:36 +11:00
readme.md [Keyboard] Geekboards Macropad V2 keyboard (#11045) 2020-12-08 15:58:32 -08:00
rules.mk Set `BOOTLOADER = stm32-dfu` for all applicable STM32 boards (#12956) 2021-06-08 19:48:46 +10:00

readme.md

geekboards/macropad_v2

Geekboards Macropad v2

8-keys macropad with CNC aluminium case, RGB LEDs for both backlight and switches, hot-swap connectors.

Keyboard Maintainer: ruddy17
Hardware Supported: Geekboards Macropad v2, STM32F072C8T6
Hardware Availability: https://geekboards.ru

Compile instruction for this keyboard (after setting up your build environment):

make geekboards/macropad_v2:via

Update firmware

Enter bootloader

  1. Press and hold leftmost button on top row (where ESC usually is)
  2. Plug in USB
  3. Keep holding the button for 3 more seconds
  4. Release the button

Alternatively:

  1. Remove bottom cover
  2. On the pcb short together two contacts labeled BOOT0
  3. Plug in USB
  4. Release BOOT0

Flash

make geekboards/macropad_v2:via:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.