qmk-dactyl-manuform-a/keyboards/ergodone
noroadsleft b090fe15d7
Fix Ergodone keyboard dimensions in info.json
2019-04-13 01:26:23 -07:00
..
keymaps Cleanup Default Keymaps (#5442) 2019-03-19 12:57:40 -07:00
config.h Fix Command feature: use get_mods() instead of keyboard_report->mods (#4955) 2019-01-27 00:28:40 -08:00
ergodone.c
ergodone.h Configurator layout repair for Ergodone, Ergodox Infinity and ErgoTravel (#3173) 2018-06-13 07:58:23 -07:00
expander.c
expander.h
i2cmaster.h
info.json Fix Ergodone keyboard dimensions in info.json 2019-04-13 01:26:23 -07:00
matrix.c
readme.md Fix hyperlinks in ErgoDone readme.md (#3323) 2018-07-05 18:34:04 -07:00
rules.mk Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
twimaster.c

readme.md

ErgoDone

ErgoDone

The ErgoDone is a modified version of the ErgoDox, made by K.T.E.C., with pre-soldered components. It has different wiring and uses a SparkFun Pro Micro instead of Teensy.

  • Keyboard maintainer: Yu He
  • Hardware supported:
    • ErgoDone v1.3 (tested)
  • Hardware availability:

Building the firmware

Install the build tools.

In the root directory of the repository, build the firmware with a command like:

make ergodone:default

For more information on the layout option and other ones, see the make guide.

Flashing the firmware onto the keyboard

The ErgoDone uses a customized HID bootloader rather than the Teensy one. It doesn't need an OS driver, and the required actions before flashing are a little different than with an ErgoDox.

  1. To enter flash mode, disconnect the keyboard first. Then, on the left-hand device, in the top row, press and hold the two rightmost keys while reconnecting the keyboard. Ergodone Flash Mode

  2. To flash the .hex file, use the hid_bootloader_cli utlity from the TKG Toolkit (as of 2017-10-03, only this old version works under Windows):

    hid_bootloader_cli -mmcu=atmega32u4 ergodone_default.hex