History

James Young 4b453dca92 Remove MIDI Configuration boilerplate (#11151 ) * remove keyboard-level instances of `MIDI_ENABLE = no` Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e '/^[ #]MIDI_ENABLE[ \t]=[ \t]no/d' {} + ``` Co-Authored-By: Nick Brassel <nick@tzarc.org> fix case-sensitivity issues on MIDI_ENABLE Change instances of `MIDI_ENABLE = YES` to `MIDI_ENABLE = yes`. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;MIDI_ENABLE[ \t]=[ \t][Yy][Ee][Ss];MIDI_ENABLE = yes;g' {} + ``` * replace `# MIDI controls` with `# MIDI support` Replace `# MIDI controls` with `# MIDI support` in keyboard-level `rules.mk` files. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#[ \t]MIDI[ \t]\(controls\\|support\).;# MIDI support;g' {} + ``` align inline comments Aligns the inline comments to the length used by the QMK AVR rules.mk template. Command: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;MIDI_ENABLE = yes.;MIDI_ENABLE = yes # MIDI support;g' {} + ``` remove commented instances of `MIDI_ENABLE` from keyboard `rules.mk` files Commands: ``` find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;#\([ \t]MIDI_ENABLE\) = yes; \1 = no ;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e 's;^\([ \t]\)\(MIDI_ENABLE = no\);\2\1;' {} + find keyboards/ -type f -name 'rules.mk' -and -not -path '/keymaps/' -exec sed -i -e '/^[ #]\+MIDI_ENABLE = no/d' {} + ``` * remove MIDI configuration boilerplate from keyboard config.h files Co-authored-by: Nick Brassel <nick@tzarc.org>		2021-08-16 06:51:13 +10:00
..
keymaps	…
config.h	Remove MIDI Configuration boilerplate (#11151 )	2021-08-16 06:51:13 +10:00
info.json	…
kc60se.c	…
kc60se.h	…
readme.md	…
rules.mk	Remove MIDI Configuration boilerplate (#11151 )	2021-08-16 06:51:13 +10:00

readme.md

kc60se

Keyboard Maintainer: Blake C. Lewis, MechMerlin
Hardware Supported: KC60SE
Hardware Availability: PCB is no longer available

Description:

60% keyboard PCB;
supports ANSI, ISO, and HHKB layouts.

Enter the Bootloader

As delivered, BOOTMAGIC_ENABLE = yes:
- unplug keyboard;
- while holding down 'Space' 'B', plug in USB cable and continue to hold for 8 seconds;
- 'lsusb' should report 'Atmel Corp. atmega32u4 DFU bootloader' instead of 'feed 6060';
- in bootloader LEDs are off & keyboard does not work.
New firmware, BOOTMAGIC_ENABLE = lite:
- holding down esc while pluging in usb.
Hardware way:
- momentary jump pads 5 & 6 to enter bootloader;

Compile the default keymap:

make kc60se:default

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.

NKRO

N or 6 Key Rollover NKRO/6KRO
navigating bios of computer may require 6KRO
default keymap has fn(T) mapped to toggle NKRO/6KRO
test: press 8 keys at same time, if 6, then 6KRO, if 8, then NKRO

DIP switches enable/disable GUI keys, the second keys from the ends on the bottom row:

K41/K4C are WIN/GUI and will disrupt games;
Add keycodes GUI_ON and GUI_OFF to your function layer to switch on/off GUI keys. It is eaier than flipping the dip switches;

 dip      keys
#1  #2  K41 K4C
 1   1   1   1    both keys enabled
 1   0   0   1
 0   1   1   0
 0   0   0   0    both keys disabled

ISP header next to the ATmega32U4:

if you can't get into bootloader, while keyboard is on, momentary jump pad 5 to pad 6

2 4 6
: : :
1 3 5

1 - B3      MISO, column 13, square pad
2 - VCC
3 - B1      SCLK, column 7
4 - B2      MOSI, caplock led
5 - Reset   | momentary jump 5 and 6
6 - Ground  | to enter Bootloader