qmk-dactyl-manuform-a/quantum/quantum.h

291 lines
7.1 KiB
C

/* Copyright 2016-2018 Erez Zukerman, Jack Humbert, Yiancar
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 2 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#if defined(__AVR__)
# include <avr/pgmspace.h>
# include <avr/io.h>
# include <avr/interrupt.h>
#endif
#if defined(PROTOCOL_CHIBIOS)
# include <hal.h>
# include "chibios_config.h"
#endif
#include "wait.h"
#include "matrix.h"
#include "keymap.h"
#ifdef BACKLIGHT_ENABLE
# ifdef LED_MATRIX_ENABLE
# include "led_matrix.h"
# else
# include "backlight.h"
# endif
#endif
#if defined(RGBLIGHT_ENABLE)
# include "rgblight.h"
#elif defined(RGB_MATRIX_ENABLE)
// Dummy define RGBLIGHT_MODE_xxxx
# define RGBLIGHT_H_DUMMY_DEFINE
# include "rgblight.h"
#endif
#ifdef RGB_MATRIX_ENABLE
# include "rgb_matrix.h"
#endif
#include "action_layer.h"
#include "eeconfig.h"
#include "bootloader.h"
#include "timer.h"
#include "sync_timer.h"
#include "config_common.h"
#include "gpio.h"
#include "atomic_util.h"
#include "led.h"
#include "action_util.h"
#include "action_tapping.h"
#include "print.h"
#include "send_string.h"
#include "suspend.h"
#include <stddef.h>
#include <stdlib.h>
extern layer_state_t default_layer_state;
#ifndef NO_ACTION_LAYER
extern layer_state_t layer_state;
#endif
#if defined(SEQUENCER_ENABLE)
# include "sequencer.h"
# include "process_sequencer.h"
#endif
#if defined(MIDI_ENABLE) && defined(MIDI_ADVANCED)
# include "process_midi.h"
#endif
#ifdef AUDIO_ENABLE
# include "audio.h"
# include "process_audio.h"
# ifdef AUDIO_CLICKY
# include "process_clicky.h"
# endif
#endif
#ifdef STENO_ENABLE
# include "process_steno.h"
#endif
#if defined(AUDIO_ENABLE) || (defined(MIDI_ENABLE) && defined(MIDI_BASIC))
# include "process_music.h"
#endif
#ifdef BACKLIGHT_ENABLE
# include "process_backlight.h"
#endif
#ifdef LEADER_ENABLE
# include "process_leader.h"
#endif
#ifdef UNICODE_ENABLE
# include "process_unicode.h"
#endif
#ifdef UCIS_ENABLE
# include "process_ucis.h"
#endif
#ifdef UNICODEMAP_ENABLE
# include "process_unicodemap.h"
#endif
#ifdef TAP_DANCE_ENABLE
# include "process_tap_dance.h"
#endif
#ifdef PRINTING_ENABLE
# include "process_printer.h"
#endif
#ifdef AUTO_SHIFT_ENABLE
# include "process_auto_shift.h"
#endif
#ifdef COMBO_ENABLE
# include "process_combo.h"
#endif
#ifdef KEY_LOCK_ENABLE
# include "process_key_lock.h"
#endif
#ifdef TERMINAL_ENABLE
# include "process_terminal.h"
#else
# include "process_terminal_nop.h"
#endif
#ifdef SPACE_CADET_ENABLE
# include "process_space_cadet.h"
#endif
#ifdef MAGIC_KEYCODE_ENABLE
# include "process_magic.h"
#endif
#ifdef JOYSTICK_ENABLE
# include "process_joystick.h"
#endif
#ifdef GRAVE_ESC_ENABLE
# include "process_grave_esc.h"
#endif
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
# include "process_rgb.h"
#endif
#ifdef HD44780_ENABLE
# include "hd44780.h"
#endif
#ifdef HAPTIC_ENABLE
# include "haptic.h"
#endif
#ifdef OLED_DRIVER_ENABLE
# include "oled_driver.h"
#endif
#ifdef DIP_SWITCH_ENABLE
# include "dip_switch.h"
#endif
#ifdef DYNAMIC_MACRO_ENABLE
# include "process_dynamic_macro.h"
#endif
#ifdef DYNAMIC_KEYMAP_ENABLE
# include "dynamic_keymap.h"
#endif
#ifdef VIA_ENABLE
# include "via.h"
#endif
#ifdef WPM_ENABLE
# include "wpm.h"
#endif
#ifdef USBPD_ENABLE
# include "usbpd.h"
#endif
// Function substitutions to ease GPIO manipulation
#if defined(__AVR__)
/* The AVR series GPIOs have a one clock read delay for changes in the digital input signal.
* But here's more margin to make it two clocks. */
# if !defined(GPIO_INPUT_PIN_DELAY)
# define GPIO_INPUT_PIN_DELAY 2
# endif
# define waitInputPinDelay() wait_cpuclock(GPIO_INPUT_PIN_DELAY)
#elif defined(__ARMEL__) || defined(__ARMEB__)
/* For GPIOs on ARM-based MCUs, the input pins are sampled by the clock of the bus
* to which the GPIO is connected.
* The connected buses differ depending on the various series of MCUs.
* And since the instruction execution clock of the CPU and the bus clock of GPIO are different,
* there is a delay of several clocks to read the change of the input signal.
*
* Define this delay with the GPIO_INPUT_PIN_DELAY macro.
* If the GPIO_INPUT_PIN_DELAY macro is not defined, the following default values will be used.
* (A fairly large value of 0.25 microseconds is set.)
*/
# if !defined(GPIO_INPUT_PIN_DELAY)
# if defined(STM32_SYSCLK)
# define GPIO_INPUT_PIN_DELAY (STM32_SYSCLK / 1000000L / 4)
# elif defined(KINETIS_SYSCLK_FREQUENCY)
# define GPIO_INPUT_PIN_DELAY (KINETIS_SYSCLK_FREQUENCY / 1000000L / 4)
# endif
# endif
# define waitInputPinDelay() wait_cpuclock(GPIO_INPUT_PIN_DELAY)
#endif
// For tri-layer
void update_tri_layer(uint8_t layer1, uint8_t layer2, uint8_t layer3);
layer_state_t update_tri_layer_state(layer_state_t state, uint8_t layer1, uint8_t layer2, uint8_t layer3);
void set_single_persistent_default_layer(uint8_t default_layer);
void tap_random_base64(void);
#define IS_LAYER_ON(layer) layer_state_is(layer)
#define IS_LAYER_OFF(layer) !layer_state_is(layer)
#define IS_LAYER_ON_STATE(state, layer) layer_state_cmp(state, layer)
#define IS_LAYER_OFF_STATE(state, layer) !layer_state_cmp(state, layer)
void matrix_init_kb(void);
void matrix_scan_kb(void);
void matrix_init_user(void);
void matrix_scan_user(void);
uint16_t get_record_keycode(keyrecord_t *record, bool update_layer_cache);
uint16_t get_event_keycode(keyevent_t event, bool update_layer_cache);
bool process_action_kb(keyrecord_t *record);
bool process_record_kb(uint16_t keycode, keyrecord_t *record);
bool process_record_user(uint16_t keycode, keyrecord_t *record);
void post_process_record_kb(uint16_t keycode, keyrecord_t *record);
void post_process_record_user(uint16_t keycode, keyrecord_t *record);
#ifndef BOOTMAGIC_LITE_COLUMN
# define BOOTMAGIC_LITE_COLUMN 0
#endif
#ifndef BOOTMAGIC_LITE_ROW
# define BOOTMAGIC_LITE_ROW 0
#endif
void bootmagic_lite(void);
void reset_keyboard(void);
void startup_user(void);
void shutdown_user(void);
void register_code16(uint16_t code);
void unregister_code16(uint16_t code);
void tap_code16(uint16_t code);
void send_dword(uint32_t number);
void send_word(uint16_t number);
void send_byte(uint8_t number);
void send_nibble(uint8_t number);
uint16_t hex_to_keycode(uint8_t hex);
void led_set_user(uint8_t usb_led);
void led_set_kb(uint8_t usb_led);
bool led_update_user(led_t led_state);
bool led_update_kb(led_t led_state);
void api_send_unicode(uint32_t unicode);