qmk-dactyl-manuform-a/lib/lufa/Demos/Device/ClassDriver/RNDISEthernet/RNDISEthernet.txt

147 lines
5.2 KiB
Plaintext

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage RNDIS Class Ethernet Demo (with Webserver/Telnet)
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBx)
* \li Series C XMEGA AVRs (ATXMEGAxxxCx)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Communications Device Class (CDC)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Remote NDIS (Microsoft Proprietary CDC Class Networking Standard)</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>Microsoft RNDIS Specification</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Remote Network Driver Interface demonstration application.
* This gives a simple reference application for implementing
* a CDC RNDIS device acting as a simple network interface for
* ethernet packet exchange. RNDIS is a proprietary Microsoft
* standard; this demo will only work on Windows 2000 (manually
* patched with the Microsoft RNDIS hotfix) and above (with no
* manual patches), or on the latest Linux kernels.
*
* Before running, you will need to install the INF file that
* is located in the RNDISEthernet project directory. This will
* enable Windows to use its inbuilt RNDIS drivers, negating the
* need for special Windows drivers for the device. To install,
* right-click the .INF file and choose the Install option. If
* Windows 2000 is used, the Microsoft INF file in the hotfix
* will need to be altered to use the VID/PID of the demo and
* then chosen instead of the LUFA RNDIS INF file when prompted.
*
* When enumerated, this demo will install as a new network
* adapter which ethernet packets can be sent to and received
* from. Running on top of the adapter is a very simple TCP/IP
* stack with a HTTP webserver and TELNET host which can be
* accessed through a web browser at IP address 10.0.0.2:80 or
* through a TELNET client at 10.0.0.2:25. This device also supports
* ping echos via the ICMP protocol.
*
* \note The TCP/IP stack in this demo has a number of limitations
* and should serve as an example only - it is not fully featured nor
* compliant to the TCP/IP specification. For complete projects, it is
* recommended that it be replaced with an external open source TCP/IP
* stack that is feature complete, such as the uIP stack.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <th><b>Define Name:</b></th>
* <th><b>Location:</b></th>
* <th><b>Description:</b></th>
* </tr>
* <tr>
* <td>CLIENT_IP_ADDRESS</td>
* <td>AppConfig.h</td>
* <td>Configures the IP address given to the client (PC) via the DHCP server.</td>
* </tr>
* <tr>
* <td>SERVER_IP_ADDRESS</td>
* <td>AppConfig.h</td>
* <td>Configures the IP address of the virtual server.</td>
* </tr>
* <tr>
* <td>ADAPTER_MAC_ADDRESS</td>
* <td>AppConfig.h</td>
* <td>Configures the MAC address of the RNDIS adapter on the host (PC) side.</td>
* </tr>
* <tr>
* <td>SERVER_MAC_ADDRESS</td>
* <td>AppConfig.h</td>
* <td>Configures the MAC address of the virtual server on the network.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ETHERNET</td>
* <td>AppConfig.h</td>
* <td>When defined, received Ethernet headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ARP</td>
* <td>AppConfig.h</td>
* <td>When defined, received ARP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_IP</td>
* <td>AppConfig.h</td>
* <td>When defined, received IP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_ICMP</td>
* <td>AppConfig.h</td>
* <td>When defined, received ICMP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_TCP</td>
* <td>AppConfig.h</td>
* <td>When defined, received TCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_UDP</td>
* <td>AppConfig.h</td>
* <td>When defined, received UDP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* <tr>
* <td>NO_DECODE_DHCP</td>
* <td>AppConfig.h</td>
* <td>When defined, received DHCP headers will not be decoded and printed to the device serial port.</td>
* </tr>
* </table>
*/