b1c5a53a68
* Add bootloader size Bootloader size needs to be 6144 to allow QMK to jump to the correct location with bootmagic * Include dz60rgb v2.1 Add boot loader size to this pcb also |
||
|---|---|---|
| .. | ||
| keymaps | ||
| v1 | ||
| v2 | ||
| v3 | ||
| config.h | ||
| dz65rgb.c | ||
| dz65rgb.h | ||
| info.json | ||
| readme.md | ||
readme.md
DZ65RGB
A customizable 65% RGB keyboard.
- Keyboard Maintainer: moyi4681
- Hardware Supported: DZ65RGB V1,V2 and V3
- Hardware Availability: KBDfans
There are three versions of the DZ65RGB. Please use the appropriate firmware for your board.
- V1: STM32F303 (Arm), takes .bin files
- V2: ATmega32U4 (AVR), takes .hex files, is31fl3731 rgbmatrix driver
- V3: ATmega32U4 (AVR), takes .bin files, is31fl3741 rgbmatrix driver
Bootloader mode
To put in bootloader mode, hold the Esc key while plugging in the USB cable. or use reset key behind the pcb.
Making firmware
Make example for this keyboard (after setting up your build environment):
make dztech/dz65rgb/v1:default # Arm (STM32F303)
make dztech/dz65rgb/v2:default # AVR (ATmega32U4)
make dztech/dz65rgb/v3:default # AVR (ATmega32U4)
See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.