qmk-dactyl-manuform-a/keyboards/sixkeyboard
skullY 4e73b0b8d7 Make the bulk of our keyboards match the readme.md standard 2017-08-16 20:36:59 -04:00
..
keymaps/default adds debouncing to sixkeyboard 2017-06-30 16:33:49 -04:00
Makefile
config.h adds debouncing to sixkeyboard 2017-06-30 16:33:49 -04:00
matrix.c remove warning 2017-06-30 16:33:49 -04:00
readme.md Make the bulk of our keyboards match the readme.md standard 2017-08-16 20:36:59 -04:00
rules.mk
sixkeyboard.c
sixkeyboard.h

readme.md

Techkeys SixKeyBoard

Keyboard Maintainer: QMK Community Hardware Supported: Techkeys SixKeyBoard PCB Hardware Availability: http://techkeys.us/collections/accessories/products/sixkeyboard

Make example for this keyboard (after setting up your build environment):

make sixkeyboard-default

See build environment setup then the make instructions for more information.

Hardware Info

The schematic is like this:

 switches       leds
,--+--+--.   ,--+--+--.
|C7|B7|B5|   |C6|B6|B4|
+--+--+--+   +--+--+--+
|D6|D1|D4|   |D5|D2|D3|
`--+--+--'   `--+--+--'

The LED on the bottom is C4. All 7 of the leds are turned on when the keyboard boots-up in the sixkeyboard.c file - backlight_enable is not required. The MCU is an Atmega16u2, so the flash memory is limited to 0x3000 bytes - the current setup uses just about all of that! I'm sure things can be opitimised a bit.

There is a jumper on the bottom of the board (next to the USB port) that serves as a reset button - I drilled a hole in my case to allow for quick access via a screwdriver/metal object.