qmk-dactyl-manuform-a/lib/lufa/Demos/Host/LowLevel/MouseHost/MouseHost.txt

75 lines
2.1 KiB
Plaintext

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage Mouse Host Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Host</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Human Interface Device (HID)</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>N/A</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF HID Specification \n
* USBIF HID Usage Tables</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Low Speed Mode \n
* Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* Mouse host demonstration application. This gives a simple reference
* application for implementing a USB Mouse host, for USB mice using
* the standard mouse HID profile.
*
* Mouse movement and button presses are displayed on the board LEDs,
* as well as printed out the serial terminal as formatted dY, dY and
* button status information.
*
* This uses a naive method where the mouse is set to Boot Protocol mode, so
* that the report structure is fixed and known. A better implementation
* uses the HID report parser for correct report data processing across
* all compatible mice with advanced characteristics, as shown in the
* MouseHostWithParser demo application.
*
* Currently only single interface mice are supported.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/