qmk-dactyl-manuform-a/lib/lufa/Demos/Device/LowLevel/MIDI/MIDI.txt

79 lines
2.3 KiB
Plaintext

/** \file
*
* This file contains special DoxyGen information for the generation of the main page and other special
* documentation pages. It is not a project source file.
*/
/** \mainpage MIDI Input Device Demo
*
* \section Sec_Compat Demo Compatibility:
*
* The following list indicates what microcontrollers are compatible with this demo.
*
* \li Series 7 USB AVRs (AT90USBxxx7)
* \li Series 6 USB AVRs (AT90USBxxx6)
* \li Series 4 USB AVRs (ATMEGAxxU4)
* \li Series 2 USB AVRs (AT90USBxx2, ATMEGAxxU2)
* \li Series AU XMEGA AVRs (ATXMEGAxxxAxU)
* \li Series B XMEGA AVRs (ATXMEGAxxxBx)
* \li Series C XMEGA AVRs (ATXMEGAxxxCx)
*
* \section Sec_Info USB Information:
*
* The following table gives a rundown of the USB utilization of this demo.
*
* <table>
* <tr>
* <td><b>USB Mode:</b></td>
* <td>Device</td>
* </tr>
* <tr>
* <td><b>USB Class:</b></td>
* <td>Audio Class</td>
* </tr>
* <tr>
* <td><b>USB Subclass:</b></td>
* <td>Standard Audio Device</td>
* </tr>
* <tr>
* <td><b>Relevant Standards:</b></td>
* <td>USBIF Audio Class Specification \n
* USB-MIDI Audio Class Extension Specification \n
* General MIDI Specification</td>
* </tr>
* <tr>
* <td><b>Supported USB Speeds:</b></td>
* <td>Full Speed Mode</td>
* </tr>
* </table>
*
* \section Sec_Description Project Description:
*
* MIDI demonstration application. This gives a simple reference
* application for implementing the USB-MIDI class in USB devices.
* It is built upon the USB Audio class.
*
* Joystick movements are translated into note on/off messages and
* are sent to the host PC as MIDI streams which can be read by any
* MIDI program supporting MIDI IN devices.
*
* If the HWB is not pressed, channel 1 (default piano) is used. If
* the HWB is pressed, then channel 10 (default percussion) is selected.
*
* This device implements MIDI-THRU mode, with the IN MIDI data being
* generated by the device itself. OUT MIDI data is discarded.
*
* \section Sec_Options Project Options
*
* The following defines can be found in this demo, which can control the demo behaviour when defined, or changed in value.
*
* <table>
* <tr>
* <td>
* None
* </td>
* </tr>
* </table>
*/