qmk-dactyl-manuform-a/lib/usbhost/USB_Host_Shield_2.0/usbhub.h

253 lines
12 KiB
C++

/* Copyright (C) 2011 Circuits At Home, LTD. All rights reserved.
This software may be distributed and modified under the terms of the GNU
General Public License version 2 (GPL2) as published by the Free Software
Foundation and appearing in the file GPL2.TXT included in the packaging of
this file. Please note that GPL2 Section 2[b] requires that all works based
on this software must also be made publicly available under the terms of
the GPL2 ("Copyleft").
Contact information
-------------------
Circuits At Home, LTD
Web : http://www.circuitsathome.com
e-mail : support@circuitsathome.com
*/
#if !defined(__USBHUB_H__)
#define __USBHUB_H__
#include "Usb.h"
#define USB_DESCRIPTOR_HUB 0x09 // Hub descriptor type
// Hub Requests
#define bmREQ_CLEAR_HUB_FEATURE USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
#define bmREQ_CLEAR_PORT_FEATURE USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
#define bmREQ_CLEAR_TT_BUFFER USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
#define bmREQ_GET_HUB_DESCRIPTOR USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
#define bmREQ_GET_HUB_STATUS USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
#define bmREQ_GET_PORT_STATUS USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
#define bmREQ_RESET_TT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
#define bmREQ_SET_HUB_DESCRIPTOR USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
#define bmREQ_SET_HUB_FEATURE USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_DEVICE
#define bmREQ_SET_PORT_FEATURE USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
#define bmREQ_GET_TT_STATE USB_SETUP_DEVICE_TO_HOST|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
#define bmREQ_STOP_TT USB_SETUP_HOST_TO_DEVICE|USB_SETUP_TYPE_CLASS|USB_SETUP_RECIPIENT_OTHER
// Hub Class Requests
#define HUB_REQUEST_CLEAR_TT_BUFFER 8
#define HUB_REQUEST_RESET_TT 9
#define HUB_REQUEST_GET_TT_STATE 10
#define HUB_REQUEST_STOP_TT 11
// Hub Features
#define HUB_FEATURE_C_HUB_LOCAL_POWER 0
#define HUB_FEATURE_C_HUB_OVER_CURRENT 1
#define HUB_FEATURE_PORT_CONNECTION 0
#define HUB_FEATURE_PORT_ENABLE 1
#define HUB_FEATURE_PORT_SUSPEND 2
#define HUB_FEATURE_PORT_OVER_CURRENT 3
#define HUB_FEATURE_PORT_RESET 4
#define HUB_FEATURE_PORT_POWER 8
#define HUB_FEATURE_PORT_LOW_SPEED 9
#define HUB_FEATURE_C_PORT_CONNECTION 16
#define HUB_FEATURE_C_PORT_ENABLE 17
#define HUB_FEATURE_C_PORT_SUSPEND 18
#define HUB_FEATURE_C_PORT_OVER_CURRENT 19
#define HUB_FEATURE_C_PORT_RESET 20
#define HUB_FEATURE_PORT_TEST 21
#define HUB_FEATURE_PORT_INDICATOR 22
// Hub Port Test Modes
#define HUB_PORT_TEST_MODE_J 1
#define HUB_PORT_TEST_MODE_K 2
#define HUB_PORT_TEST_MODE_SE0_NAK 3
#define HUB_PORT_TEST_MODE_PACKET 4
#define HUB_PORT_TEST_MODE_FORCE_ENABLE 5
// Hub Port Indicator Color
#define HUB_PORT_INDICATOR_AUTO 0
#define HUB_PORT_INDICATOR_AMBER 1
#define HUB_PORT_INDICATOR_GREEN 2
#define HUB_PORT_INDICATOR_OFF 3
// Hub Port Status Bitmasks
#define bmHUB_PORT_STATUS_PORT_CONNECTION 0x0001
#define bmHUB_PORT_STATUS_PORT_ENABLE 0x0002
#define bmHUB_PORT_STATUS_PORT_SUSPEND 0x0004
#define bmHUB_PORT_STATUS_PORT_OVER_CURRENT 0x0008
#define bmHUB_PORT_STATUS_PORT_RESET 0x0010
#define bmHUB_PORT_STATUS_PORT_POWER 0x0100
#define bmHUB_PORT_STATUS_PORT_LOW_SPEED 0x0200
#define bmHUB_PORT_STATUS_PORT_HIGH_SPEED 0x0400
#define bmHUB_PORT_STATUS_PORT_TEST 0x0800
#define bmHUB_PORT_STATUS_PORT_INDICATOR 0x1000
// Hub Port Status Change Bitmasks (used one byte instead of two)
#define bmHUB_PORT_STATUS_C_PORT_CONNECTION 0x0001
#define bmHUB_PORT_STATUS_C_PORT_ENABLE 0x0002
#define bmHUB_PORT_STATUS_C_PORT_SUSPEND 0x0004
#define bmHUB_PORT_STATUS_C_PORT_OVER_CURRENT 0x0008
#define bmHUB_PORT_STATUS_C_PORT_RESET 0x0010
// Hub Status Bitmasks (used one byte instead of two)
#define bmHUB_STATUS_LOCAL_POWER_SOURCE 0x01
#define bmHUB_STATUS_OVER_CURRENT 0x12
// Hub Status Change Bitmasks (used one byte instead of two)
#define bmHUB_STATUS_C_LOCAL_POWER_SOURCE 0x01
#define bmHUB_STATUS_C_OVER_CURRENT 0x12
// Hub Port Configuring Substates
#define USB_STATE_HUB_PORT_CONFIGURING 0xb0
#define USB_STATE_HUB_PORT_POWERED_OFF 0xb1
#define USB_STATE_HUB_PORT_WAIT_FOR_POWER_GOOD 0xb2
#define USB_STATE_HUB_PORT_DISCONNECTED 0xb3
#define USB_STATE_HUB_PORT_DISABLED 0xb4
#define USB_STATE_HUB_PORT_RESETTING 0xb5
#define USB_STATE_HUB_PORT_ENABLED 0xb6
// Additional Error Codes
#define HUB_ERROR_PORT_HAS_BEEN_RESET 0xb1
// The bit mask to check for all necessary state bits
#define bmHUB_PORT_STATUS_ALL_MAIN ((0UL | bmHUB_PORT_STATUS_C_PORT_CONNECTION | bmHUB_PORT_STATUS_C_PORT_ENABLE | bmHUB_PORT_STATUS_C_PORT_SUSPEND | bmHUB_PORT_STATUS_C_PORT_RESET) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_ENABLE | bmHUB_PORT_STATUS_PORT_CONNECTION | bmHUB_PORT_STATUS_PORT_SUSPEND)
// Bit mask to check for DISABLED state in HubEvent::bmStatus field
#define bmHUB_PORT_STATE_CHECK_DISABLED (0x0000 | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_ENABLE | bmHUB_PORT_STATUS_PORT_CONNECTION | bmHUB_PORT_STATUS_PORT_SUSPEND)
// Hub Port States
#define bmHUB_PORT_STATE_DISABLED (0x0000 | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_CONNECTION)
// Hub Port Events
#define bmHUB_PORT_EVENT_CONNECT (((0UL | bmHUB_PORT_STATUS_C_PORT_CONNECTION) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_CONNECTION)
#define bmHUB_PORT_EVENT_DISCONNECT (((0UL | bmHUB_PORT_STATUS_C_PORT_CONNECTION) << 16) | bmHUB_PORT_STATUS_PORT_POWER)
#define bmHUB_PORT_EVENT_RESET_COMPLETE (((0UL | bmHUB_PORT_STATUS_C_PORT_RESET) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_ENABLE | bmHUB_PORT_STATUS_PORT_CONNECTION)
#define bmHUB_PORT_EVENT_LS_CONNECT (((0UL | bmHUB_PORT_STATUS_C_PORT_CONNECTION) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_CONNECTION | bmHUB_PORT_STATUS_PORT_LOW_SPEED)
#define bmHUB_PORT_EVENT_LS_RESET_COMPLETE (((0UL | bmHUB_PORT_STATUS_C_PORT_RESET) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_ENABLE | bmHUB_PORT_STATUS_PORT_CONNECTION | bmHUB_PORT_STATUS_PORT_LOW_SPEED)
#define bmHUB_PORT_EVENT_LS_PORT_ENABLED (((0UL | bmHUB_PORT_STATUS_C_PORT_CONNECTION | bmHUB_PORT_STATUS_C_PORT_ENABLE) << 16) | bmHUB_PORT_STATUS_PORT_POWER | bmHUB_PORT_STATUS_PORT_ENABLE | bmHUB_PORT_STATUS_PORT_CONNECTION | bmHUB_PORT_STATUS_PORT_LOW_SPEED)
struct HubDescriptor {
uint8_t bDescLength; // descriptor length
uint8_t bDescriptorType; // descriptor type
uint8_t bNbrPorts; // number of ports a hub equiped with
struct {
uint16_t LogPwrSwitchMode : 2;
uint16_t CompoundDevice : 1;
uint16_t OverCurrentProtectMode : 2;
uint16_t TTThinkTime : 2;
uint16_t PortIndicatorsSupported : 1;
uint16_t Reserved : 8;
} __attribute__((packed));
uint8_t bPwrOn2PwrGood;
uint8_t bHubContrCurrent;
} __attribute__((packed));
struct HubEvent {
union {
struct {
uint16_t bmStatus; // port status bits
uint16_t bmChange; // port status change bits
} __attribute__((packed));
uint32_t bmEvent;
uint8_t evtBuff[4];
};
} __attribute__((packed));
class USBHub : USBDeviceConfig {
static bool bResetInitiated; // True when reset is triggered
USB *pUsb; // USB class instance pointer
EpInfo epInfo[2]; // interrupt endpoint info structure
uint8_t bAddress; // address
uint8_t bNbrPorts; // number of ports
// uint8_t bInitState; // initialization state variable
uint32_t qNextPollTime; // next poll time
bool bPollEnable; // poll enable flag
uint8_t CheckHubStatus();
uint8_t PortStatusChange(uint8_t port, HubEvent &evt);
public:
USBHub(USB *p);
uint8_t ClearHubFeature(uint8_t fid);
uint8_t ClearPortFeature(uint8_t fid, uint8_t port, uint8_t sel = 0);
uint8_t GetHubDescriptor(uint8_t index, uint16_t nbytes, uint8_t *dataptr);
uint8_t GetHubStatus(uint16_t nbytes, uint8_t* dataptr);
uint8_t GetPortStatus(uint8_t port, uint16_t nbytes, uint8_t* dataptr);
uint8_t SetHubDescriptor(uint8_t port, uint16_t nbytes, uint8_t* dataptr);
uint8_t SetHubFeature(uint8_t fid);
uint8_t SetPortFeature(uint8_t fid, uint8_t port, uint8_t sel = 0);
void PrintHubStatus();
uint8_t Init(uint8_t parent, uint8_t port, bool lowspeed);
uint8_t Release();
uint8_t Poll();
void ResetHubPort(uint8_t port);
virtual uint8_t GetAddress() {
return bAddress;
};
virtual bool DEVCLASSOK(uint8_t klass) {
return (klass == 0x09);
}
};
// Clear Hub Feature
inline uint8_t USBHub::ClearHubFeature(uint8_t fid) {
return ( pUsb->ctrlReq(bAddress, 0, bmREQ_CLEAR_HUB_FEATURE, USB_REQUEST_CLEAR_FEATURE, fid, 0, 0, 0, 0, NULL, NULL));
}
// Clear Port Feature
inline uint8_t USBHub::ClearPortFeature(uint8_t fid, uint8_t port, uint8_t sel) {
return ( pUsb->ctrlReq(bAddress, 0, bmREQ_CLEAR_PORT_FEATURE, USB_REQUEST_CLEAR_FEATURE, fid, 0, ((0x0000 | port) | (sel << 8)), 0, 0, NULL, NULL));
}
// Get Hub Descriptor
inline uint8_t USBHub::GetHubDescriptor(uint8_t index, uint16_t nbytes, uint8_t *dataptr) {
return ( pUsb->ctrlReq(bAddress, 0, bmREQ_GET_HUB_DESCRIPTOR, USB_REQUEST_GET_DESCRIPTOR, index, 0x29, 0, nbytes, nbytes, dataptr, NULL));
}
// Get Hub Status
inline uint8_t USBHub::GetHubStatus(uint16_t nbytes, uint8_t* dataptr) {
return ( pUsb->ctrlReq(bAddress, 0, bmREQ_GET_HUB_STATUS, USB_REQUEST_GET_STATUS, 0, 0, 0x0000, nbytes, nbytes, dataptr, NULL));
}
// Get Port Status
inline uint8_t USBHub::GetPortStatus(uint8_t port, uint16_t nbytes, uint8_t* dataptr) {
return ( pUsb->ctrlReq(bAddress, 0, bmREQ_GET_PORT_STATUS, USB_REQUEST_GET_STATUS, 0, 0, port, nbytes, nbytes, dataptr, NULL));
}
// Set Hub Descriptor
inline uint8_t USBHub::SetHubDescriptor(uint8_t port, uint16_t nbytes, uint8_t* dataptr) {
return ( pUsb->ctrlReq(bAddress, 0, bmREQ_SET_HUB_DESCRIPTOR, USB_REQUEST_SET_DESCRIPTOR, 0, 0, port, nbytes, nbytes, dataptr, NULL));
}
// Set Hub Feature
inline uint8_t USBHub::SetHubFeature(uint8_t fid) {
return ( pUsb->ctrlReq(bAddress, 0, bmREQ_SET_HUB_FEATURE, USB_REQUEST_SET_FEATURE, fid, 0, 0, 0, 0, NULL, NULL));
}
// Set Port Feature
inline uint8_t USBHub::SetPortFeature(uint8_t fid, uint8_t port, uint8_t sel) {
return ( pUsb->ctrlReq(bAddress, 0, bmREQ_SET_PORT_FEATURE, USB_REQUEST_SET_FEATURE, fid, 0, (((0x0000 | sel) << 8) | port), 0, 0, NULL, NULL));
}
void PrintHubPortStatus(USB *usbptr, uint8_t addr, uint8_t port, bool print_changes = false);
#endif // __USBHUB_H__