andrejl
/
qmk-dactyl-manuform-a
1
0
Fork 0
Code Issues Pull Requests Projects Releases Wiki Activity
qmk-dactyl-manuform-a/keyboards/handwired/tractyl_manuform/5x6_right/f303
History
Drashna Jaelre 0338481090
[Keyboard] Updates for Tractyl Manuform config (#14641) 		2021-09-29 09:30:25 -07:00
..
config.h [Keyboard] Updates for Tractyl Manuform config (#14641) 2021-09-29 09:30:25 -07:00
f303.c [Keyboard] Updates for Tractyl Manuform config (#14641) 2021-09-29 09:30:25 -07:00
f303.h [Keyboard] Updates for Tractyl Manuform config (#14641) 2021-09-29 09:30:25 -07:00
halconf.h [Keyboard] Updates for Tractyl Manuform config (#14641) 2021-09-29 09:30:25 -07:00
mcuconf.h [Keyboard] Updates for Tractyl Manuform config (#14641) 2021-09-29 09:30:25 -07:00
readme.md [Keyboard] Updates for Tractyl Manuform config (#14641) 2021-09-29 09:30:25 -07:00
rules.mk [Keyboard] Updates for Tractyl Manuform config (#14641) 2021-09-29 09:30:25 -07:00

readme.md

Drashna's Blackpill Tractyl Manuform (5x6) with a right side trackball

  • Split Hand Pin, using PC14

  • Full Duplex Serial/USART using PA9 and PA10 on USART1

  • DAC Audio using PA4 and PA5

  • PWM RGB using PA6 TIM3

  • pmw3360 sensor using PA5-PA7 on SPI2, with B as CS pin

  • 8KB SPI EEPROM chip sharing PB13-PB15 on SPI1 with PB9 as CS pin

  • Encoder using PA7 and PA8

  • SSD1306 OLED display (128x64) using PB6 and PB7 on I2C1

  • Keyboard Maintainer: Drashna Jael're

  • Hardware Supported: Design files, WeAct BlackPill (F411), PMW3360 Optical Sensor

Make example for this keyboard (after setting up your build environment):

make handwired/tractyl_manuform/5x6_right/f411:default

Flashing example for this keyboard:

make handwired/tractyl_manuform/5x6_right/f411:default:flash

See the build environment setup and the make instructions for more information. Brand new to QMK? Start with our Complete Newbs Guide.