* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* feat: new keymapping for idobo
* fix: added licenses. converted int to uint8_t where applicable
* fix: addressed zvecr stylistic enhancements
* fix: replaced rgblight_sethsv with rgblight_sethsv_noeeprom
* VIA Support for the Idobo (ID75)
* Implemented the requested PR changes
* Readme was pointing to the wrong board
* Fixed Product ID
* Fixed Manufacturer name
* Better Vendor ID
Using the two 8-bit ASCII values from the keyboard name.
* Removed Bootmagic Lite as enabled anyway by VIA
* greenshadowmaker keymap for idobo xd75 massdrop
* remove uneeded config.h
* corrected format to match convention instead of xd75 where I accidentally started from
* fixed errors and added arrows bottom right to match my other layouts
* updated readme
* right arrow fix
* Update keyboards/idobo/keymaps/greenshadowmaker/keymap.c
removing unnecessary part, copied from different keymap
Co-Authored-By: fauxpark <fauxpark@gmail.com>
* added suggested changes
* removed unneded elements
* greenshadowmaker keymap for idobo xd75 massdrop
* remove uneeded config.h
* corrected format to match convention instead of xd75 where I accidentally started from
* Add default value for IS_COMMAND for COMMAND feature
* Cleanup and consistency
* Update Templates to reflect change
* Fix IS_COMMAND in template
* Fix IS_COMMAND define
* Use consistent IS_COMMAND block in templates
* Remove unnecessary `#undef IS_COMMAND` directives
* Fix compile issue on orthodox
* Reomve IS_COMMAND option for newer boards
* Remove all existing definitions of IS_COMMAND if they use default LSHIFT and RSHIFT setting
* Remove a couple of additional IS_COMMAND defines
* Remove remaining redundant IS_COMMAND definitions
* Remove #undef IS_COMMAND from orthodox:drashna and whitefox:konstantin
* Remove multiple empty lines in modified config.h files
* Update additional boards
* Reomve IS_COMMAND from newer boards
* Update Alice keyboard
* Remove IS_COMMAND from additional boards
Jan 24th edition
* my XD75 builds for idobo and XD75
these are my xd75 layouts for the 2 versions of the board
* clearing of free space
spring cleaning
* additional cleaning
more spring cleaning
* removed lighting commands
don't need lighting on the idobo board so removal of such commands to keep the sizing down
* update for readme.md
* Update config.h
* commiting with keymap erros on idobo for review
* syntax fix for idobo and xd75 revok75, addition of del key switch on fn layer
* config edit to config user and keymap QMK_KEYBOARD_H
* update to vol controls for both idobo and xd75 for revok75 keymap
* filename changes
* Adding my new keymap, based of xd75, with leds enabled via the rules.mk file
* cleaned up the rules file
* Per Change Requests: removed deprecated functions along with updated the map to use the layout macro instead of raw matrix
* initial commit
* put my name everywhere
* get the switch matrix correct
* add a basic keymap
* use a better LAYOUT macro
* update readme
* Add QMK Configurator support
Path Nirvana
Giorgi Chavchanidze
QMK Bot
IFo Hancroft
Drashna Jaelre
Ryan
James Young
Jordan Egstad
ridingqwerty
Drew Smathers
GreenShadowMaker
zvecr
Stefan Peterson
jtcarrasco
zgtm
xjacobx
Milton Griffin
MechMerlin