* Added a dactyl promicro with a slightly different 6x6 layout
* updated keyboard layout
* Removed description as per code review
* refactored as per code review
* removed redundant config.h file
* removed and updated a couple of lines in rules.mk
* replaced symlink with copy of file
* removed lines in readme
* Update readme.md
Co-authored-by: ralphie02 <ralph.azucena@carbon60.com>
* Add LAYOUT_alice support: fallacy
* Add LAYOUT_alice support: kb_elmo/sesame
* Add LAYOUT_alice support: cheshire/curiosity
* Add LAYOUT_alice support: evyd13/wonderland
* Add LAYOUT_alice support: mechlovin/adelais
* Update LAYOUT_alice support: projectkb/alice
The PR that added Alice community layout support for the projectkb/alice/rev2 simultaneously broke support for every other keyboard that supported LAYOUT_alice.
This commit partially reverts the offending PR. `LAYOUT_alice` for the projectkb/alice has been renamed to `LAYOUT_alice_split_bs`, and a correct 65-key `LAYOUT_alice` has been added.
Additionally, the `LAYOUTS` rule has been moved to keyboard level as the layout macros are shared between rev1 and rev2 boards, which means the layout options are the same for both revisions.
* Update ramonimbao/aelith info.json
Keyboard source was already correct to support LAYOUT_alice, but the layout tree was missing from info.json.
* Fork `alice` Community Layout...
... into Standard and Split Backspace versions
Also updates stanrc85's layout keymap to use 65 keys instead of the Split Backspace 66-key version.
* Update LAYOUT_alice support: sneakbox/aliceclone
Rework the sneakbox/aliceclone to use the Split Backspace Alice layout.
* Update LAYOUT_alice support: zoo/wampus
The layout macro that was `LAYOUT_alice` was 66 keys. This layout macro has been renamed to `LAYOUT_alice_split_bs`, and a 65-key `LAYOUT_alice` has been added.
Additionally, the 66-key macro has been rearranged to accept its keycodes in the intended order for Community Layout support.
* Update keyboards for `LAYOUT_alice_split_bs` support
* LAYOUT_alice_split_bs support: ergosaurus
* LAYOUT_alice_split_bs support: handwired/colorlice
* LAYOUT_alice(_split_bs) support: handwired/owlet60
* LAYOUT_alice_split_bs support: nightly_boards/alter/rev1
* LAYOUT_alice(_split_bs) support: sck/osa
* LAYOUT_alice_split_bs support: tgr/alice
* LAYOUT_alice(_split_bs) support: tkc/osav2
* LAYOUT_alice_split_bs support: xelus/valor/rev1
* Branch point for 2020 November 28 Breaking Change
* Remove matrix_col_t to allow MATRIX_ROWS > 32 (#10183)
* Add support for soft serial to ATmega32U2 (#10204)
* Change MIDI velocity implementation to allow direct control of velocity value (#9940)
* Add ability to build a subset of all keyboards based on platform.
* Actually use eeprom_driver_init().
* Make bootloader_jump weak for ChibiOS. (#10417)
* Joystick 16-bit support (#10439)
* Per-encoder resolutions (#10259)
* Share button state from mousekey to pointing_device (#10179)
* Add hotfix for chibios keyboards not wake (#10088)
* Add advanced/efficient RGB Matrix Indicators (#8564)
* Naming change.
* Support for STM32 GPIOF,G,H,I,J,K (#10206)
* Add milc as a dependency and remove the installed milc (#10563)
* ChibiOS upgrade: early init conversions (#10214)
* ChibiOS upgrade: configuration file migrator (#9952)
* Haptic and solenoid cleanup (#9700)
* XD75 cleanup (#10524)
* OLED display update interval support (#10388)
* Add definition based on currently-selected serial driver. (#10716)
* New feature: Retro Tapping per key (#10622)
* Allow for modification of output RGB values when using rgblight/rgb_matrix. (#10638)
* Add housekeeping task callbacks so that keyboards/keymaps are capable of executing code for each main loop iteration. (#10530)
* Rescale both ChibiOS and AVR backlighting.
* Reduce Helix keyboard build variation (#8669)
* Minor change to behavior allowing display updates to continue between task ticks (#10750)
* Some GPIO manipulations in matrix.c change to atomic. (#10491)
* qmk cformat (#10767)
* [Keyboard] Update the Speedo firmware for v3.0 (#10657)
* Maartenwut/Maarten namechange to evyd13/Evy (#10274)
* [quantum] combine repeated lines of code (#10837)
* Add step sequencer feature (#9703)
* aeboards/ext65 refactor (#10820)
* Refactor xelus/dawn60 for Rev2 later (#10584)
* add DEBUG_MATRIX_SCAN_RATE_ENABLE to common_features.mk (#10824)
* [Core] Added `add_oneshot_mods` & `del_oneshot_mods` (#10549)
* update chibios os usb for the otg driver (#8893)
* Remove HD44780 References, Part 4 (#10735)
* [Keyboard] Add Valor FRL TKL (+refactor) (#10512)
* Fix cursor position bug in oled_write_raw functions (#10800)
* Fixup version.h writing when using SKIP_VERSION=yes (#10972)
* Allow for certain code in the codebase assuming length of string. (#10974)
* Add AT90USB support for serial.c (#10706)
* Auto shift: support repeats and early registration (#9826)
* Rename ledmatrix.h to match .c file (#7949)
* Split RGB_MATRIX_ENABLE into _ENABLE and _DRIVER (#10231)
* Split LED_MATRIX_ENABLE into _ENABLE and _DRIVER (#10840)
* Merge point for 2020 Nov 28 Breaking Change
* added to handwired pill60
* Update keyboards/handwired/pill60/config.h and all other PR suggested changes
Deleted DESCRIPTION
Co-authored-by: Drashna Jaelre <drashna@live.com>
Update keyboards/handwired/pill60/readme.md
Smaller image in readme
Co-authored-by: Drashna Jaelre <drashna@live.com>
Update keyboards/handwired/pill60/info.json
Deleted key_count
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/keymaps/default/keymap.c
Deleted backslash on keymap.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/pill60.h
Deleted led.h
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/blackpill_f401/rules.mk
Update stm32f401 rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/blackpill_f411/rules.mk
Update stm32f411 rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/bluepill/rules.mk
Update bluepill rules.mk
Co-authored-by: Ryan <fauxpark@gmail.com>
Update keyboards/handwired/pill60/rules.mk
Added comment on rules.mk to help ]
Co-authored-by: Ryan <fauxpark@gmail.com>
deleted bootloader_defs.h
added GPL2 + compatible license header
updated keymap readme
updated those that don't need common_config.h and deleted some unnecessary spaces in f411/rules.mk
updated default folder in rules.mk
* fix and simplify build files according to onekey example
* Added GPL2+ Compatible license header
By default the `i2c_master` driver for ChibiOS uses the B6 pin for
`I2C1_SCL` and the B7 pin for `I2C1_SDA`. However, the ChibiOS board
file used for the F401 Blackpill board (`ST_STM32F401C_DISCOVERY`)
configures B6 as `I2C1_SCL` and B9 as `I2C1_SDA`, and if that
configuration is left unchanged, enabling the `i2c_master` driver
results in having two pins (B7 and B9) configured as `I2C1_SDA` at the
same time, which does not work properly (experimental results show that
the B9 pin still works as `I2C1_SDA` in that case, and the B7 pin does
not work).
Configure the B9 pin as an input with pull-up in `board_init()`, so that
the B7 pin can be configured as `I2C1_SDA` by the I2C driver.
* Add pteron44
* Apply suggestions from code review
Co-authored-by: Ryan <fauxpark@gmail.com>
* Apply suggestions from code review part 2
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add my own keymap
* Layer 0: Workman
* Layer 1: RSTHD (my own take on it)
* Layer 2: Mouse
* Layer 3: Navigation
* Layer 4: Symbols right
* Layer 5: Symbols left
* Layer 6: Fn keys
* Layer 7: Numbers
* Layer 8: Vim and misceallaneaous accessible from any other layer
* Move the current code to a 0.1 folder in preparation for upcoming changes
Version 0.2 is currently being prototyped and uses an arm chip which
will need its own firmware.
There is also the Ferris sweep which uses a pro-micro compatible board
which will need its own directory.
* Move Ferris out of handwired and into the light
The keyboard is now well out of the prototype phase as tens of them have
been produced and acquired by various people.
With 0.2 coming out, adoption is going to increase again as the board
will be available for sale at some recognized vendors.
Now is probably a good time to recognize its status as more than a
prototype :)
* Add code for the Ferris Sweep (a.k.a cradio)
The Ferris Sweep is a creation of the talented @davidphilipbarr, a.k.a DPB.
It has the key layout of a Ferris and uses a pro-micro connected to the
switches via direct pins so that diodes are not needed and the soldering
is minimal.
With their blessing, I took the code for it from DPB's own repo:
https://github.com/davidphilipbarr/36keys/tree/master/qmk/cradio
and did some adaptations such as removing commented out code, enabling
EE_HANDS and mouse keys for consistency with my existing Ferris code.
* Fix indentation in rules.mk
* Fix indentation in sweep's config
* Remove unnecessary lines from sweep's rules.mk
* Remove unnecessary lines from sweep's rules.mk
* Rename 0.1 to 0_1
This avoids the dot looking like the separation between a filename and
its extension.
In the same commit, bring matrix.c to the 0_1 folder as this was needed
for the code to compile properly (matrix.c is referred to in the readme
under `0_1` and is specific to that revision of the firmware).
* Update copyright statements for Sweep
* Clean LeftyNumpad code
* Fix typo in recently renamed file
* Fix issues with keymap layout
* Initial PR Feedback fixes
* Update keyboards/handwired/leftynumpad/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Update keyboards/handwired/leftynumpad/config.h
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: Joel Challis <git@zvecr.com>
* Apply suggestions from code review
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Add fixes based on PR feedback
* Update keyboards/handwired/leftynumpad/readme.md
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Joel Challis <git@zvecr.com>
Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Basic keymap parsing finally works
* Add 'keymap.json' creation to the qmk.keymap module
* Add tests and fix formatting
* Fix/exclude flake8 errors
* Convert keymap.c to valid keymap.json
* Fix some errors
* Add tests
* Finalize keymap.json creation, add json template
* Add docs
* Move pygments to the standard requirements
* Add support for nameless layers, fix tests
* Fix things after rebase
* Add missing 'keymap' value.
* Fix missing layer numbers from advanced keycodes
Buckwich noticed that if the advanced keycode / layer toggling key
contains a number, it goes missing.
Now we properly handle them.
Thx for noticing!
* Apply suggestions from code review
* fixup tests
Co-authored-by: Zach White <skullydazed@drpepper.org>
Co-authored-by: skullY <skullydazed@gmail.com>
* Move my custom functions and keymaps to userspace to be able to add the STM32F411 variant of my keyboard with mostly the same functionality
* Move keymaps to community layouts
* Remove keymaps from userspace readme.md
Co-authored-by: Janos Daniel Reibl <janos.daniel.reibl@protonmail.com>
* First pass at manuform layout.
* Updates from actual usage on my board. Fixed a couple of bugs, added a stormlight quote randomizer.
* Use a 32-bit timer that can actually hit 5 minutes.
* Some updates after a day of usage:
* Turn off WPM. It's too inaccurate and takes up a decent amount of space that can be devoted to quotes.
* Turn off the OLEDs after 5 minutes
* Move the keys around a bit.
* Add many more quotes.
* Adjust the quotes to make room for missing and misswritten WoT quote. Adjusted the keymap slightly. Adjust the mods display to include one_shots.
* Revert osm on lgui as it makes start menu search impossible to use.
* Use LTO_ENABLE flag.
* License all of my (333fred's) keymaps as MIT.
* Update users/333fred/rgb.c
Co-authored-by: Ryan <fauxpark@gmail.com>
Co-authored-by: Ryan <fauxpark@gmail.com>
* Create keymap.c
* Add files via upload
* Added files for handwired 3d printed clueboard 660
* create via layout files
* added layout files for via
* updated product ID to fix id conflicts
* change product ID to fix ID conflicts.
* fixed capitalization error that was causing issues
* fixed capitalization issues.
* fix syntax errors
* Fixed syntax errors (stray punctuation)
* Compatibility fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility fixes
* capitalization fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility Fixes
* Compatibility fixes
* Compatibility fixes
* Compatibility changes
* upkeep, fixing typos
* Update keyboards/handwired/3dp660/config.h
Removed Description line
* Update keyboards/handwired/3dp660/rules.mk
correct bootloader
* Update keyboards/handwired/3dp660/3dp660.h
fix case sensitive typos
* Update keyboards/handwired/3dp660/keymaps/default/keymap.c
change tab indentation to space indentations.
* Update keyboards/handwired/3dp660/keymaps/via/keymap.c
change tab indentations to space indentations
* Delete 3dp660.json
This file was for VIA, and shouldn't be in this repo. I placed it here so I wouldn't misplace it in my filesystem. My apologies.
* Update info.json
change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi".
* Update keymap.c
change suggestions to other file said to lowercase "ansi", caused reference issues, changed all instances of "ANSI" to "ansi".
* Update keymap.c
more capitalization fixes
* Update keyboards/handwired/3dp660/readme.md
shortened imgur url
* Update keyboards/handwired/3dp660/rules.mk
remove extraneous comments
* Delete config.h
* Update keyboards/handwired/3dp660/rules.mk
* Update 3dp660.c
add license headers to all .c and .h files
* Update 3dp660.h
added license header to all .c and .h files.
* Update keymap.c
added license header to all .c and .h files.
* Update keymap.c
added license header to all .c and .h files.
* Update keyboards/handwired/3dp660/readme.md
Add maintainer URL
* Update keyboards/handwired/3dp660/keymaps/default/keymap.c
remove extraneous default keymap layers
* Update keyboards/handwired/3dp660/keymaps/default/rules.mk
* Update rules.mk
Moved LTO to keyboard level.
* Update rules.mk
Moved LTO to keyboard level.
* Delete rules.mk
Made obsolete by LTO move to keyboard level.
* Update keyboards/handwired/3dp660/rules.mk
capitalization errors.
* Apply suggestions from code review
Housekeeping, changing code for readability.
Fix configs to make the `handwired/onekey/blackpill_f401:backlight` and
`handwired/onekey/blackpill_f411:backlight` examples actually compile
and work:
- Use `PWMD5` instead of `PWMD2` for backlight, which matches the
default value of `BACKLIGHT_PAL_MODE` (AF02 for pin A0 is `TIM5_CH1`)
and does not conflict with the default value of `STM32_ST_USE_TIMER`.
- Enable `HAL_USE_PWM` in halconf.h and `STM32_PWM_USE_TIM5` in
mcuconf.h, so that `PWMD5` could be used.
There is no way to invoke the command feature while having just a single
physical key, and disabling that feature fixes build for keymaps like
`handwired/onekey/promicro:rgb` without resorting to LTO (the command
feature consumes more than 4900 bytes with avr-gcc 8.4.0).
* Better handle LTO_ENABLE
Especially when calling from command line
* Replace LINK_TIME_OPTIMIZATION_ENABLE with LTO_ENABLE
* Remove long for LTO from show_options.mk
Dmitry Nosachev
Ralph Azucena
James Young
Drashna Jaelre
Brandon Claveria
Joel Challis
Ikta
Takeshi ISHII
Sergey Vlasov
Reibl János Dániel
Ryan
Reibl János Dániel
Erovia
Filip Paryż
Fidel Coria
Pierre Chevalier
Evgenii
Tom Swartz
Fred Silberberg
Joel Schneider
QMK Bot
gooberpsycho
Spaceman
Zach White