Commit Graph

12 Commits (84d5198ef9b4106fe61530211b5b5bb1a2fc52c8)

Author SHA1 Message Date
James Young 1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Joe Wasson 7230923b05 Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
Rob Rogers 357d930f5a correct extraneous t 2017-10-06 11:09:03 -10:00
Rob Rogers 8d7cc11d72 correct layer numbers in keymaps 2017-10-06 11:09:03 -10:00
Rob Rogers 4d5b7dea14 Let's split hand mirroring support
commit b7a1c6fe3f0709d176a7833387051b2323b16f17
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Wed Sep 6 08:28:00 2017 -0500

    add hand swap config matrix for Let's Split

commit 1d53113d96b711db549f735316c2ea3f7469021b
Merge: 98f40e3 4edfa97
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Tue Sep 5 21:43:34 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit 98f40e31c4a1728d826037b375cf336d550bf69a
Merge: a825225 94f8b75
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Mon Sep 4 20:20:46 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit a825225810a6282f7229cdf6b1c05fd9c27e1808
Merge: 56846cb f0db2c0
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Thu Aug 31 19:47:25 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit 56846cb0326f1c78cba47b8161f4d389e19202c3
Merge: 4deb6ca ba2ad57
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Sun Aug 27 15:05:16 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit 4deb6ca77633c603f8a134946bb4edc7ed619b50
Merge: 6f85d1f 7960302
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Sat Aug 26 23:23:48 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit 6f85d1ff7cfac0a4a70b133984cd681852b49df6
Merge: e6aff71 4b0c6dc
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Thu Aug 24 14:33:31 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit e6aff71807bf2dc41edbec91408a827c32ef73ef
Merge: 9d38f6f d54360b
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Wed Aug 23 13:43:20 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit 9d38f6fe83e08962b14fd5d8a70ff100302af598
Merge: d1c0a9f 3aa7fbc
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Tue Aug 22 22:13:05 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit d1c0a9f3b0d9ac466595b197cd8fbce3f1e42f8a
Merge: bd8dbb9 5cab5e4
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Sun Aug 20 10:00:01 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit bd8dbb9d19344623f1b3cefc0a2b205864e9ba3c
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Sun Aug 20 09:59:45 2017 -0500

    fix line endings another time
    '
    '

commit 2602515eb22451feed3178966ffeed33c0f4548b
Merge: 41e549e 71d1c02
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Wed Aug 16 21:31:28 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit 41e549e3d527b58f92df28caf8daecae06e5ecf8
Merge: e624ea5 88198a9
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Fri Aug 11 12:48:45 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit e624ea55a1f715d008661ae2e180ae55a09ef0c8
Merge: 5966f09 933701c
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Mon Aug 7 14:43:30 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit 5966f096016ffce9c4802ade57d250d9f756bd73
Merge: 71c173d dd3803f
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Tue Aug 1 21:58:14 2017 -0500

    Merge branch 'master' of github.com:qmk/qmk_firmware

commit 71c173dee1aa16dd762897531c42d23f6da0159c
Author: Rob Rogers <r2d2rogers@gmail.com>
Date:   Mon Jul 31 00:19:08 2017 -0500

    line endings???
2017-09-06 09:20:49 -07:00
climbalima 21b6b4e6c4 should have fixed conflixed 2016-11-16 19:49:38 -05:00
climbalima 5cac51a773 Merge https://github.com/climbalima/qmk_firmware 2016-11-16 19:26:38 -05:00
climbalima 1dd6ceb45d Updated my repo to current qmk 2016-11-16 19:18:54 -05:00
climbalima b5cecb4cc9 Added both revisions into one folder 2016-11-10 20:03:24 -05:00
Dustin c40ad11615 Fix lets_split.c so that audio can be disabled
Matching the use of `#ifdef AUDIO_ENABLE` used in `matrix_init_kb()` in order to compile firmware for the Let's Split keyboard without audio enabled.
2016-09-25 19:04:20 -07:00
Jack Humbert a4bf46f9b1 default keymap, reset sorted out for now, added serial to makefile 2016-07-06 22:48:19 -04:00
Jack Humbert d707738616 i2c working 2016-07-05 23:27:10 -04:00