Commit Graph

40 Commits (7d2d0c6795eaaa87d4e13fc159807b64ca2d71f9)

Author SHA1 Message Date
Joe Wasson 743449472e Make `PREVENT_STUCK_MODIFIERS` the default (#3107)
* Remove chording as it is not documented, not used, and needs work.

* Make Leader Key an optional feature.

* Switch from `PREVENT_STUCK_MODIFIERS` to `STRICT_LAYER_RELEASE`

* Remove `#define PREVENT_STUCK_MODIFIERS` from keymaps.
2018-09-17 13:48:02 -04:00
Yasuhiro Shimizu 93b5c98fbb Keymap: remove unnecessary readme from my helix keymap (#3860) 2018-09-09 19:23:24 -07:00
Yasuhiro Shimizu ffc2dc0359 Keymap: add yshrsmz keymaps (#3770)
* add ergo42 keymap

* add helix keymap

* add keymap for lets_split

* Add keymap for nyquist

* update keymaps to address review comments

- remove unneeded include
- use `#pragma once`
2018-09-01 09:38:29 -07:00
Takeshi ISHII 97d09ef8fa Keyboard: remove old comment from keyboards/helix/rules.mk (#3795)
remove 2 lines from keyboards/helix/rules.mk

 | -# if firmware size over limit, try this option
 | -# CFLAGS += -flto
 | -

see keyboards/helix/[rev2|pico]/keymaps/EACH_MAP/rules.mk:

 | Link_Time_Optimization = no # if firmware size over limit, try this option
 :
 :
 :
 | ifeq ($(strip $(Link_Time_Optimization)),yes)
 |    EXTRAFLAGS += -flto -DUSE_Link_Time_Optimization
 | endif
2018-08-29 18:12:09 -07:00
MakotoKurauchi b3d80d4af0 Keymap: Helix : Update froggy keymap (#3652)
* led ripple effect

* fix key name
2018-08-15 09:30:34 -07:00
Biacco42 e5f201edb4 Keymap: Port ergo42/biacco keymap to Helix pico (#3585)
* Port ergo42/biacco keymap to Helix pico

* Fix for review
2018-08-11 13:22:32 -07:00
MakotoKurauchi feb5e4aaeb Keyboard: Helix serial improvements (#3608)
* add change_reciver2sender()/change_sender2reciver()

This is a change to improve readability.

* txled, rxled off in matrix_init()

* add serial_send_packet() / serial_recive_packet()

This is a change to reduce object size.

* add serial_low() at ISR() top

* add __attribute__((always_inline)) to some functions

* modify serial_send_packet()/serial_recive_packet()

A little, object size reduction.
A little, speedup.

* add debug code to helix/serial.c

* Adjust sampling timing of serial signal being received

* add split_scomm.c/split_scomm.h and change serial.c/serial.h

serial.c was divided into 2 layers, split_scom.c and serial.c.
The upper layer split_scomm.c is called from matrix.c.
The lower layer serial.c accesses the hardware.

* add split_scomm.c/split_scomm.h into helix/rev1

* reduce object size helix/rev2/matrix.c

* remove checksum check, add parity check

* force occur parity error for test

* parity test ok. remove test code

* change some comment & add skip code when buffer_size == 0

* serial.c: multiple types of transaction support

Add 4 bits transaction-type field at packet top.
Select Transaction Descriptor Table entry by transaction-type.

* helix serial master-slave transaction optimize

Using multi-type transaction feature of serial.c, communication contents between master slaves were optimized.

* add debug code for retry

* add comment into each config.h

* fix ISR status drop

* add a debug macro 'debug_retry_chg()'

* reduce led_test size

* remove debug code from helix/serial.c and etc.

* helix:five_rows change TAPPING_TERM value 140

* Improved compatibility with let's split of serial.c. Finish helix/serial.c improvement.

- The difference with the original let's split's serial.c
  - It's high-speed about 4 times.
  - Stable bi-directional data transfer. (Helix need master to slave transfer)
  - serial.h was divided 2 files, serial_config.h and sereial.h
  - With multiple types of transaction support, communication contents can be optimized. (NEW flexible API)

- USE OLD Simple APIs (compatible with let's split serial.c)
  - files :
    - serial_config.h -- hardware configuration (need include by config.h)
    - serial.c/serial.h -- serial communication

- USE NEW flexible APIs. (Support multi-type transaction function.)
  serial.c was divided into 2 layers, split_scom.c and serial.c.
  The upper layer split_scomm.c is called from matrix.c.
  The lower layer serial.c accesses the hardware.
  - files
    - split_scomm.c -- communication buffer is defined in here. call by matrix.c.
    - split_scomm.h -- buffer size is defined in here. include by matrix.c, split_util.c
    - serial_config.h -- hardware configuration (need include by config.h)
      To use the NEW API, specify #define SERIAL_USE_MULTI_TRANSACTION
    - serial.c/serial.h -- serial communication lower layer

- NEW APIs for serial.c / serial.h (The lower layer)
  // Soft Serial Transaction Descriptor
  typedef struct _SSTD_t  {
      uint8_t *status;
      uint8_t initiator2target_buffer_size;
      uint8_t *initiator2target_buffer;
      uint8_t target2initiator_buffer_size;
      uint8_t *target2initiator_buffer;
  } SSTD_t;

  // initiator is transaction start side
  void soft_serial_initiator_init(SSTD_t *sstd_table);
  // target is interrupt accept side
  void soft_serial_target_init(SSTD_t *sstd_table);
  int soft_serial_transaction(int sstd_index);
  int soft_serial_get_and_clean_target_status(int sstd_index);

- NEW APIs for split_scomm.c / split_scomm.h (The upper layer)
   move from old serial.c the following buffer and functions
     serial_slave_buffer[]
     serial_master_buffer[]
     void serial_master_init(void)
     void serial_slave_init(void)
     int serial_update_buffers(void)
   define SERIAL_xxxxx_BUFFER_LENGTH move from serial_config.h to split_scomm.h
2018-08-10 08:22:09 -07:00
marksard 9aee5e6427 Keymap: refactoring and modifief to helix five rows jis (#3552)
* display of LED mode
* refactoring
* modified a keymap
* use extra jp header
2018-08-02 14:32:37 -07:00
Takeshi ISHII b29799f887 Keyboard: fixed build break (size overflow) HelixPico with Backlight or Underglow (#3546)
* build break fix for HelixPico

* add customize variable 'Link_Time_Optimization' into rev2 and pico keymaps rules.mk

* "CFLAGS += -flto" change to "EXTRAFLAGS += -flto"

* add USE_Link_Time_Optimization macro
2018-08-02 14:16:17 -07:00
MakotoKurauchi 07e0558e9a Keyboard: Add HelixPico keyboard (#3502) 2018-07-26 14:26:02 -07:00
marksard 7e8d4be8ac Keymap: Refactor helix keymap based on changes to default keymap (#3469) 2018-07-23 11:44:55 -07:00
marksard 4d4b845cf5 Keymap: Modified of 'Helix five rows JIS" keymap (#3425)
* Change key layout in raise-layer.
* Improvement update cycle to mouse key changes.

* Update the readme.md
2018-07-16 20:08:31 -07:00
noroadsleft 180d39824b Helix rev1 refactor: deleted extra commas (#3379) 2018-07-12 10:32:15 -07:00
MakotoKurauchi f30d6dd785 Helix config refine (#3374)
* helix config.h refine
2018-07-12 10:23:30 -07:00
epaew 0b9b2a6376 Add edvorakjp keymap for the Helix (rev2) keyboard (#3340)
* add readme.md

* add extern declaration of edvorakjp_config to edvorakjp.h

* add oled.c

* add layout definitions

* add keymap.c

* add rules.mk

* fix rgblight issue: rgblight_setrgb() ignore RGBLIGHT_LIMIT_VAL
2018-07-08 05:11:02 -07:00
epaew ebe4c3dbbe Helix: Move definition of LAYOUT_kc to each revision. (#3333) 2018-07-07 21:14:59 -07:00
MakotoKurauchi 77445afac5 defaulted to 5 rows when HELIX_ROWS is not defined (#3312) 2018-07-04 19:04:11 -07:00
Takeshi ISHII c197d080c4 Update Helix 'led_test' keymap (#3292)
* now helix led_test local rgblight.[ch] not use. remove.

* greatly simplify keyboards/helix/rev2/keymaps/led_test/keymap.c

Helix keymap 'led_test' use modified default/keymap.c
2018-07-03 16:16:38 -07:00
MakotoKurauchi c3d429bcb6 defaulted to 5 rows when HELIX_ROWS is not defined (#3282) 2018-07-01 11:09:06 -07:00
marksard 738eab0bb1 Helix five rows jis (#3274)
* Added keymap for Helix like Japanese JIS keyboard.

* * Refactored
* Supported to display of exchange layer
2018-07-01 11:04:34 -07:00
MakotoKurauchi c8e1397e08 Helix fix configrator problem (#3270)
* Fix problem with configrator

* Edit keyboard info
2018-06-30 18:08:52 -07:00
MakotoKurauchi 155375ea32 Helix shrink config (#3268)
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION

* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md

* change helix/ssd1306.c for select glcdfont.c position

* add variable LOCAL_GLCDFONT into each keymaps rules.mk

* Add iPhone/iPad LED support to Helix default keymap

* renumber _ADJUST for shrink program size

* Fix Helix i2c wrong bit rate

* add helix serial debug code

* serial debug macro move from config.h to serial.h

* helix serial.c debugging...

* refine debug macros

* add some comments

* add SELECT_SERIAL_SPEED

* add comments

* debugging sync_send/sync_recv

* add very high speed

* fix sync_send/sync_recv

* fix com. start and switch send/recv

* debug mode off

* remove debug codes

* Shrinked config.h
2018-06-30 13:12:17 -07:00
MakotoKurauchi 1038bbef40 Helix serial bugfix (#3255)
* add helix serial debug code

* serial debug macro move from config.h to serial.h

* helix serial.c debugging...

* refine debug macros

* add some comments

* add SELECT_SERIAL_SPEED

* add comments

* debugging sync_send/sync_recv

* add very high speed

* fix sync_send/sync_recv

* fix com. start and switch send/recv

* debug mode off

* remove debug codes
2018-06-28 06:55:15 -07:00
noroadsleft e84c07e6f7 Helix: Refactor and Configurator support (#3238)
* Matrix refactor

* Keymap refactor

* Configurator support
2018-06-27 07:37:27 -07:00
MakotoKurauchi 0f3a73025c Fix Helix i2c wrong bit rate (#3207) 2018-06-21 10:44:33 -07:00
MakotoKurauchi 7498b184b7 Support ios to default keymap (#3118)
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION

* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md

* change helix/ssd1306.c for select glcdfont.c position

* add variable LOCAL_GLCDFONT into each keymaps rules.mk

* Add iPhone/iPad LED support to Helix default keymap

* add Freggy keymap

* adjust the delay of serial.c

* change readme

* renumber _ADJUST for shrink program size
2018-06-04 08:14:35 -07:00
Takeshi ISHII 8707bdd509 Fix helix:led_test build break (#3110)
* copy new rgblight.[ch] from quantum/ into keyboards/helix/rev2/keymaps/led_test/ and add mode 35 RGB cyclic mode

* force RGB light mode 25
2018-06-02 09:07:32 -07:00
MakotoKurauchi 1ff7473ce4 Add LOCAL_GLCDFONT option (#2854)
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION

* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md

* change helix/ssd1306.c for select glcdfont.c position

* add variable LOCAL_GLCDFONT into each keymaps rules.mk
2018-04-30 08:15:49 -07:00
MakotoKurauchi d1481172bc Helix oled rgb compile sw (#2606)
* Helix keyboard OLED, RGBLIGHT enable/disable control integrate into rules.mk

rules.mk: add 4 Variables for compile control.

   # Helix keyboard customize
   # you can edit follows 4 Variables
   #  jp: 以下の4つの変数を必要に応じて編集します。
   OLED_ENABLE = no            # OLED_ENABLE
   LED_BACK_ENABLE = no        # LED backlight (Enable WS2812 RGB underlight.)
   LED_UNDERGLOW_ENABLE = no   # LED underglow (Enable WS2812 RGB underlight.)
   LED_ANIMATIONS = yes        # LED animations

config.h: auto set RGBLED_NUM by HELIX_ROWS and rules.mk's define

* HELIX_ROWS define move from config.h to rules.mk

* add readme.md

* rename readme.md to readme_jp.md

* add readme.md and modify readme_jp.md
2018-04-24 09:43:57 -07:00
Takeshi ISHII e2fb3079c7 update Helix keymap 'five_rows' (#2635)
* add 'HELIX=' option for build

* add IOS_DEVICE_ENABLE for iPad

* shrink size to helix five_rows keymap.c

* shrink size. _ADJUST number change

* add KEYPAD layer

* modify keypad leyer

* display RGB mode on slave side OLED

* fix Colemak, Dvorak center DEL to BS

* change LEFT BS to LEFT SP and add AUX layer for try old map

* update update_base_layer()

* add right keypad and keypad func layer

* use MO() macro insted of LOWER,RAISE,ADJUST custom key-code

* remove LOWER,RAISE,ADJUST custom key-code
* use MO(_LOWER|_RAISE|_ADJUST)
* relayout ADJUST layer

* modify Function Layer. PGUP,PGDN swap HOME,END

* add Keypad aux layer for '00' send

* update README.md, README_jp.md

* fix README.md

* fix README.md, README_jp.md
2018-04-15 09:54:56 -07:00
Takeshi ISHII 824d584d8c New keymap for The Helix keyboard("five_rows") (#2592)
* duplicate keyboards/helix/rev2/keymaps/default to keyboards/helix/rev2/keymaps/five_rows

* OLED Layer display 'Qwerty','Colemak','Dvorak'

* set Qwerty, Lower, Raise map

* set Colemak map

* set Dvorak map

* OLED Layer display 'Raise','Lower' change to 'Extra char','Function'

* fix ExtraChar Layer Shift-key disable

* Raise,Lower,Adjust layer modify

some key change KC_TRNS to KC_NO
add KANA, EISU key

* refine keymaps/five_rows/{config.h,rules.mk} for easy and safe customize

* modify Adjust layer: all function into left hand, remove F1..F12,DEL

* Add Helix five_rows keymap README.md and README_jp.md

* Raise Layer modify: enable Raise(Extr)+Lower(Func)==Adjust

* fix image file url in README.md,README_jp.md

* change Layer display on OLED

* change OLED display base name position
2018-03-23 16:08:37 -07:00
Takeshi ISHII f56ded3214 add README.md into keyboards/helix/rev2/keymaps/led_test/ (#2582) 2018-03-23 16:04:49 -07:00
U-LANDSRAAD\drashna 682c8a260a Fix audio issues with Split keyboards that missed previously 2018-03-16 16:38:05 -04:00
Joe Wasson 7230923b05 Rename ONEHAND_ENABLE to SWAP_HANDS_ENABLE for consistency 2018-03-16 16:33:43 -04:00
Takeshi ISHII 3d1801e63a Helix keyboard led test as a keymap (#2513)
* duplicate keyboards/helix/rev2/keymaps/default to keyboards/helix/rev2/keymaps/led_test

* OLED & RGB LED on

* duplicate quantum/rgblight.[ch] to keyboards/helix/rev2/keymaps/led_test

* rgblight.c modify for RGB test
2018-03-16 16:28:07 -04:00
MakotoKurauchi 3313473004 Usb max power (#2502)
* add some comment about Helix customize and auto-setup RGBLIGHT_LIMIT_VAL

* add define USB_MAX_POWER_CONSUMPTION
2018-03-09 13:15:37 -05:00
MakotoKurauchi 955b17189a Move rows config to keymap (#2464)
* Fork from Let's Split

* Organizing files

* Delete some keymaps

* I2C and serial enabled at the same time

* Change readme

* add #define HELIX_ROWS for multiple rows

* Delete avrdude flashing script

* Delete makefiles

* Subproject elimination

* Fix lufa path

* Remove PLAY_NOTE_ARRAY usages to get rid of warning.

Fix conflicting function name

* Mousekey change default to off

* Fix to oled display adjust

* make rev2

change pin assign
change keymap

* use master_buffer

* Timing adjustment

* Organizing files

* Change Keymap

* Change Keymap

Add EISU and KANA
Correct 4rows

* NKRO default to disable

* EXTRAKEY_ENABLE default to disable

* add rgb reset key

* rgb custom function enable

*  Extend font

* add RGBLED_POWER

default folder to helix/rev2
RGB_ENABLE to no

* renamed directory

* Disable RGBLIGHT_CUSTOM_DRIVER

* Disable LOCKING_SUPPORT_ENABLE

* Update bootloader setting

* Change readme

* Fixed argument error

* Move rows config to keymap
2018-03-07 17:34:42 -05:00
Drashna Jaelre b0e8de1c97 Fix EE HANDS on splits losing handedness if RGB is enabled (#2399)
* Fix EE HANDS on splits losing handedness if RGB is enabled

* Because I'm an idiot and did a bad cut/paste job
2018-02-16 12:00:39 -05:00
U-LANDSRAAD\drashna 84a713b05c Remove _quantum functions from custom matrix.c code 2018-02-06 12:25:30 -05:00
MakotoKurauchi bceffdefca Add helix keyboard (#2308)
* Fork from Let's Split

* Organizing files

* Delete some keymaps

* I2C and serial enabled at the same time

* Change readme

* add #define HELIX_ROWS for multiple rows

* Delete avrdude flashing script

* Delete makefiles

* Subproject elimination

* Fix lufa path

* Remove PLAY_NOTE_ARRAY usages to get rid of warning.

Fix conflicting function name

* Mousekey change default to off

* Fix to oled display adjust

* make rev2

change pin assign
change keymap

* use master_buffer

* Timing adjustment

* Organizing files

* Change Keymap

* Change Keymap

Add EISU and KANA
Correct 4rows

* NKRO default to disable

* EXTRAKEY_ENABLE default to disable

* add rgb reset key

* rgb custom function enable

*  Extend font

* add RGBLED_POWER

default folder to helix/rev2
RGB_ENABLE to no

* renamed directory

* Disable RGBLIGHT_CUSTOM_DRIVER

* Disable LOCKING_SUPPORT_ENABLE

* Update bootloader setting

* Change readme

* Fixed argument error
2018-01-28 12:14:12 -05:00