* Add initial keyboard layout for Quefrency
* Add RGB config and keybindings for Quefrency
* Move Quefrency wheel keys to more convenient place
* Actually switch from serial to I2C
Commit 64708c6 updated the comment, not the #define. D'oh!
* [Keyboard] Update Gergo to use newer Ergodox Matrix code
And update layout macros to be correct
* Almost forgot the json file
* Remove board specific defines for i2c timeout
* Start to standardize macro timer
* Update Fractal layout
Specifically, limit the RGB Lighting, since it's too many for the power, and only have the KITT annimation on the front
* Update Iris keymap to use I2C for transport
* Remove TAP_CODE_DELAY from keyboard in favor of global setting
* Remove Woodpad
Since it\'s no longer in my possession
* Only enable LTO on AVR boards
* Run matrix_scans while doing startup light
* Run matrix_scan to get split keyboard code synced properly
* Fix rgb mode
* Remove custom debouncing settings
* Make RGB Light Startup Animation optional
* Fix opt def
* Remove extra tap code delay value
* Fix references to keebio boards
* Add support for LP Iris keyboard
* Add backlight code
* Make startup animation optional
* Update gitlab ci script
* Remove port declaration
* Revert avrgcc changes to gitlab ci file
* Don't re-set mods
* Remove MACRO_TIMER define
* Add custom name for crkbd
* Add name for Prime M pad
* Add names for ortho 4x12 boards
* Add some additional handling for rgb init
* Change thumb clusters on ergodox
* Switch Orthodox to I2C
* Fix Space in ergodox keymap
* Use OSL for ergodox layout
* Ugh, can't find a good layout
* Fix typo
* Fix up animation startup
* Cries in AVR
* Fix makefiles for ergodox ez boards
* Add support for "secret songs" in my userspace
* Reset debounce to 5ms for Ergodox EZ
* Fix gitlab CI yaml file
* More crying in AVR
* Cannot use rgb light and rgb matrix at the same time due to the WS2812 rgb matrix PR until the "Coexistance" PR is merged
* Update ODox for split common and i2c
* Add split config
* Impement Split code
* Add support for xscorpion OLED code
* Add OLED display config
* Fix OLED screen font
* Get OLED set up in vertical mode
* Remove old OLED code
* add per key support for crkbd
* Fix split changes
* RGB Tweeaks
* More OLED tweaks
* Fix rotation stuff
* Fix more OLED stuff
* Remove custom Debounce from Ergodox layout since it's no longer needed
With my XD60, I noticed that when typing the backlight was flickering.
The XD60 doesn't have the backlight wired to a hardware PWM pin.
I assumed it was a timing issue in the matrix scan that made the PWM
lit the LED a bit too longer. I verified it because the more keys that
were pressed, the more lighting I observed.
This patch makes the software PWM be called during CPU interruptions.
It works almost like the hardware PWM, except instead of using
the CPU waveform generation, the CPU will fire interruption
when the LEDs need be turned on or off.
Using the same timer system as for hardware PWM, when the counter
will reach OCRxx (the current backlight level), an Output Compare
match interrupt will be fired and we'll turn the LEDs off.
When the counter reaches its maximum value, an overflow interrupt
will be triggered in which we turn the LEDs on.
This way we replicate the hardware backlight PWM duty cycle.
This gives a better time stability of the PWM computation than pure
software PWM, leading to a flicker free backlight.
Since this is reusing the hardware PWM code, software PWM also supports
backlight breathing.
Note that if timer1 is used for audio, backlight will use timer3, and if
timer3 is used for audio backlight will use timer1.
If both timers are used for audio, then this feature is disabled and we
revert to the matrix scan based PWM computation.
Signed-off-by: Brice Figureau <brice@daysofwonder.com>
* added info.json for ymd96
* fix layout for keymap_custom macrom, correct info.json for default layout
* add info layout for iso
* add info layout for iso
* align layout name, added maintainer username
* layout case fix
* layout case fix
* fix overlapping keys
* match layouts to keymaps.
* Define RGB colors
Define RGB colors and pass them to the rgblight functions, instead of
defining multiple macros.
* Add new color definitions support for RGB Matrix
* Add/clarify info about new color definitions in Docs
* Add deprecation warning banner to rgblight_list.h
* initial commit
* get rid of some of the vanilla code
* set up matrix and pins
* Create LAYOUT macro and an appropriate keymap
* support for caps lock LED
* add some documentation to the doro67 parent readme
* align the language used in the several readme files
* initial commit
* get rid of some of the vanilla code
* set up matrix and pins
* Create LAYOUT macro and an appropriate keymap
* support for caps lock LED
* add some documentation to the doro67 parent readme
* align the language used in the several readme files
* Use RGB Matrix and fix enter key bug
* fix formatting
* remove merge conflict artifacts
* make a more useful default keymap
* add configurator support for the RGB pcb
* fix rgb matrix based on new info. Multipler should be reversed
* forgot to actually set the pin output for caps lock led
* fix offset keys in layer 1 keymap
* code cleanup
* use macros for the rgb_led calculations struct
* set RGB led num to 67 as I mistakenly counted the caps lock led
* cleanup config.h file
* add RGB note in readme
* get consistent naming in config file
* fix some inconsistencies
* readjust matrix and get rid of macros based on drashna's suggestions
* add keymap
* fix readme title
* renamed README.md to lowercase, fix typo
* renamed README.md to lowercase, for real
* add double spaces for github
* lowercase name in readme
* rename directory to lowercase
* Make Signum 3.0 compatible with default ortho_4x12 layout
* Disable unicode map by default
* Add missing backspace key
* Add missing delete key
* Fix broken gui right command
* Move MO5 to a different key an add Esc to L4
* Move MO5 to a different key
* Add Del and Bspace to layer 4
fauxpark
Wilba
Jonathan Rascher
Drashna Jaelre
MechMerlin
jotix
noroadsleft
moyi4681
kit-bto
skullY
mtei
zvecr
Callum Oakley
Bob
Rockman18
Jan Christoph Ebersbach
Florian Didron
ymzcdg
ishtob
M-AS
Brice Figureau
Harshit Goel
Erovia
Jason Koh
XScorpion2
George Petri
Rys Sommefeldt
William Chang
Len Trigg