Commit Graph

73 Commits (491b83aa32e59be68387c25fcfa7bd6e7cb51479)

Author SHA1 Message Date
Joel Challis b5bcd5b0a1
Refactor some platform dependent logic (#13675) 2021-07-24 19:56:45 +01:00
Takeshi ISHII d26537acc1
remove `RGBLIGHT_H_DUMMY_DEFINE` macro from rgblight.h (#13569) 2021-07-17 12:13:16 +09:00
James Young 1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
Takeshi ISHII b664db3cf3
Removed unused RGBLED_TIMER_TOP and F_CPU macros from quantum/rgblight.[ch] (#12233) 2021-03-25 23:05:38 +11:00
Nick Brassel d65db68f9f Merge remote-tracking branch 'upstream/master' into develop 2021-01-28 10:52:59 +11:00
Joshua Diamond bad9592a18
Add rgblight_reload_from_eeprom() (#11411)
* Add rgblight_reset_from_eeprom()

* reset->reload
2021-01-28 04:42:03 +11:00
QMK Bot 6f9db2b48e Merge remote-tracking branch 'origin/master' into develop 2021-01-11 08:07:48 +00:00
Joshua Diamond 4d96b85b6f
Lighting Layers should be disabled when suspended (#11442)
* Lighting Layers should be disabled when suspended

* bugfixes
2021-01-11 00:07:09 -08:00
Joshua Diamond 6e8adeeaac
Refine twinkle to be smoother (use breathing curve) (#11350)
* Refine twinkle to be smoother (use breathing curve)

* tune more for firmware size

* fix bug when v=255

~ drashna approved ~
2021-01-10 23:04:42 -08:00
Ryan 48f4768d33
Change include guards in quantum/ to pragma once (#11239) 2020-12-26 15:53:12 +11:00
Max Rumpf 4b74f985ec Tweak the Christmas animation effect to be less harsh on the eyes (#7648)
* Tweak the Christmas animation effect to be less harsh on the eyes

* Further improve the tweaked Christmas animation code

- Use constants where it makes sense
- Instead of complicated math, use a static variable to keep track if it's animating from or to red
- Don't use pow (but a simple macro instead)
- Using floating point math is necessary for the fraction in the cubic bezier function to work

* Update docs for the tweaked Christmas animation effect

* Further improve memory usage

- Don't use floats, but 32 bit ints instead (where needed)
- Replace limits.h with constant

* Fix typo
2020-08-29 14:30:02 -07:00
Drashna Jaelre b338a4d886
Add noeeprom speed function for RGBLIGHT (#9706)
* [Docs] Add Speed functions to RGB Light docs

* Add noeeprom functions for speed

* Fix wording in doc

Co-authored-by: Ryan <fauxpark@gmail.com>

Co-authored-by: Ryan <fauxpark@gmail.com>
2020-08-25 19:08:09 +10:00
Drashna Jaelre d0e0202b27
Add query functions for RGB Light and RGB Matrix (#8960)
* Add additional query functions for RGBLIGHT

* Add additional query functions for RGB Matrix

* Change names of enable check functions

* Fix macro for rgb matrix takeover of rgblight functions

* Add documentation for rgb_matrix_get_hsv()

* Add *_get_hsv function to rgblight
2020-05-18 06:05:35 -07:00
Joshua Diamond a8a8bf0ff3
Allow expanding from 8 to 32 RGB Lighting Layers (#8941)
* Allow 16 lighting layers

* Require #define RGBLIGHT_LAYERS_16 to enable 16 layers

* Override RGBLIGHT_MAX_LAYERS to set maximum number of lighting layers

* Enforce lower bound on RGBLIGHT_MAX_LAYERS

Co-Authored-By: Takeshi ISHII <2170248+mtei@users.noreply.github.com>

* Fix an error in the check for valid RGBLIGHT_MAX_LAYERS

* Don't use bitfield / PACKED, as it causes bloat

* Update documentation re: up to 32 lighting layers

* Run cformat

* Add note about increasing FW size in docs/config_options.md

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Remove no-longer-valid comment

* Add doc note that split sync will be slower

Co-authored-by: Takeshi ISHII <2170248+mtei@users.noreply.github.com>
Co-authored-by: Drashna Jaelre <drashna@live.com>
2020-05-13 21:39:05 +01:00
QMK Bot e7860d673b format code according to conventions [skip ci] 2020-05-09 09:31:49 +00:00
Joshua Diamond 2fe7e221ec
New RGB Lighting effect: Twinkle (#8887)
* Add twinkle RGB Lighting effect

* 2nd twinkle algo - double-buffering

* Further refinement: Per-LED twinkle

* Add documentation for Twinkle RBG Lighting mode

* Bias twinkle saturation closer to the set value

* Fix whitespace
2020-05-09 01:56:16 -07:00
Joshua Diamond e0f548085c
Add ability to blink lighting layer for a specified duration (#8760)
* Implement momentarily blink of lighting layers

* Refactor spidey3 userspace to use rgb layer blink

* Remove un-necessary line from example in documentation

* Revert "Refactor spidey3 userspace to use rgb layer blink"

This reverts commit 831649bb680c41c6d663ae6fa86d13f4f8bebdd8.

* Adds a missing bit of documentation about lighting layer blink

* Update docs/feature_rgblight.md per suggestions

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* Update docs/feature_rgblight.md per suggestions

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* Update docs/feature_rgblight.md per suggestions

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>

* cformat, as suggested

Co-authored-by: James Young <18669334+noroadsleft@users.noreply.github.com>
2020-05-09 01:38:33 -07:00
Drashna Jaelre 86c4c4e91d
Convert clipping variables in rgblight.c to a structure (#7720) 2020-04-29 10:22:28 +02:00
QMK Bot 1aa40dde46 format code according to conventions [skip ci] 2020-03-10 20:24:13 +00:00
Nathan Gray 2ffb08843b
Feature: RGBLight layers (#7768)
* New feature: RGBLIGHT_LAYERS

This feature allows users to define multiple independent layers of lighting
that can be toggled on and off individually, making it easy to use your
RGB lighting to indicate things like active keyboard layer & modifier state.

* Demonstrate built in functions for layer state checking

Also link the video in the docs.

* Follow existing pattern for setting rgblight_status flags

* Eliminate rgblight_is_static_mode since it's not needed

Just check to see if the timer is enabled directly.
2020-03-10 12:50:01 -07:00
Takeshi ISHII dbbab40981
Refactor rgblight_reconfig.h (#7773)
* Moved contents of rgblight_reconfig.h to rgblight_post_config.h.

In #3582, rgblight_reconfig.h had to be newly created. Now, the build system of qmk_firmware has a post_cofig feature, so that what was done in rgblight_reconfig.h can now be realized in rgblight_post_config.h.

**This commit does not change the build result.**

Testing script
```shell
  # build on master
  git checkout master
  echo master > /tmp/master_md5.txt

  # RGBLIGHT_ENABLE = no
  make HELIX=verbose helix/rev2:default:clean
  make HELIX=verbose helix/rev2:default
  md5 helix_rev2_default.hex >> /tmp/master_md5.txt

  # RGBLIGHT_ENABLE = yes, with animations
  make HELIX=verbose helix/rev2/back:default:clean
  make HELIX=verbose helix/rev2/back:default
  md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt

  # RGBLIGHT_ENABLE = yes, without animations
  make HELIX=verbose,no_ani helix/rev2/back:default:clean
  make HELIX=verbose,no_ani helix/rev2/back:default
  md5 helix_rev2_back_default.hex >> /tmp/master_md5.txt

  # build on refactor_rgblight_reconfig.h
  git checkout refactor_rgblight_reconfig.h
  echo refactor_rgblight_reconfig.h > /tmp/branch_md5.txt

  # RGBLIGHT_ENABLE = no
  make HELIX=verbose helix/rev2:default:clean
  make HELIX=verbose helix/rev2:default
  md5 helix_rev2_default.hex >> /tmp/branch_md5.txt

  # RGBLIGHT_ENABLE = yes, with animations
  make HELIX=verbose helix/rev2/back:default:clean
  make HELIX=verbose helix/rev2/back:default
  md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt

  # RGBLIGHT_ENABLE = yes, without animations
  make HELIX=verbose,no_ani helix/rev2/back:default:clean
  make HELIX=verbose,no_ani helix/rev2/back:default
  md5 helix_rev2_back_default.hex >> /tmp/branch_md5.txt

  diff -u /tmp/master_md5.txt /tmp/branch_md5.txt
```

Test result:
```
--- /tmp/master_md5.txt 2020-01-03 15:42:22.000000000 +0900
+++ /tmp/branch_md5.txt 2020-01-03 15:42:42.000000000 +0900
@@ -1,4 +1,4 @@
-master
+refactor_rgblight_reconfig.h
 MD5 (helix_rev2_default.hex) = f360032edd522448366d471d8f4f8181
 MD5 (helix_rev2_back_default.hex) = 0c663acc6cccc44476b3b969ad22a48f
 MD5 (helix_rev2_back_default.hex) = e66b1195ff6d38e6e22c975b8ae42fd3
```

* Expressions that are too long are difficult to read, so wrap them.

* Edit the expression again

* remove `defined(RGBLIGHT_ANIMATIONS)` in `tmk_core/common/*/suspend.c`, `tmk_core/protocol/*/main.c`

move contents of rgblight_reconfig.h to rgblight.h.

The following changes were made to rgblight.h.

```diff
+#ifdef RGBLIGHT_USE_TIMER
 void rgblight_task(void);

 void rgblight_timer_init(void);
 void rgblight_timer_enable(void);
 void rgblight_timer_disable(void);
 void rgblight_timer_toggle(void);
+#else
+#define rgblight_task()
+#define rgblight_timer_init()
+#define rgblight_timer_enable()
+#define rgblight_timer_disable()
+#define rgblight_timer_toggle()
+#endif
```

The following changes were made to tmk_core/common/avr/suspend.c, tmk_core/common/chibios/suspend.c, tmk_core/protocol/chibios/main.c, tmk_core/protocol/lufa/lufa.c, tmk_core/protocol/vusb/main.c.

```diff
-#    ifdef RGBLIGHT_ANIMATIONS
     rgblight_timer_enable();
-#    endif
```
```diff
-#if defined(RGBLIGHT_ANIMATIONS) && defined(RGBLIGHT_ENABLE)
+#if defined(RGBLIGHT_ENABLE)
         rgblight_task();
 #endif
```

* remove 'defined(RGBLIGHT_ANIMATIONS)' in tmk_core/common/keyboard.c

Co-authored-by: Joel Challis <git@zvecr.com>
2020-03-10 01:46:03 -07:00
QMK Bot e3d59a72f9 format code according to conventions [skip ci] 2020-01-20 18:48:28 +00:00
Wilba 484a9b12bc Add VIA support for QMK backlight, QMK RGBLight (#7911)
* Add VIA support for QMK backlight, QMK RGBLight

* clang-format changes
2020-01-20 10:18:25 -08:00
skullY b624f32f94 clang-format changes 2019-08-30 15:01:52 -07:00
XScorpion2 e7711b3b66 Moving rgb typedefs into a single location (#5978)
Because someone named the define poorly

Using full relative path as handwired/promethium has a color.h file
2019-06-04 11:04:30 -07:00
Takeshi ISHII 670a9b7f83 Add effect range to rgblight.c (#5856)
* add rgblight_set_effect_range()

* implement effect range

* Arrange the order of function list in rgblight.h .

* update docs/feature_rgblight.md

* fix RGBLIGHT_RAINBOW_SWIRL_RANGE default value

* add example code about Utility Functions

* add example code about direct operation functions

* When RGBLIGHT_SPLIT is defined, the following function has no meaning and is invalidated.

 * rgblight_setrgb_master(r, g, b)
 * rgblight_setrgb_slave(r, g, b)
 * rgblight_sethsv_master(h, s, v)
 * rgblight_sethsv_slave(h, s, v)

* add temporary test code for rgblight_set_effect_range

* fix rgblight_effect_knight() bug

* Test End. Revert "add temporary test code for rgblight_set_effect_range"

This reverts commit 5680cddd012d68b2db75a532862a7fef250f8973.
2019-05-15 21:11:28 -07:00
Takeshi ISHII 3da8d46a07 If RGBLIGHT_EFFECT_BREATHE_CENTER is undefined, use fixed breathe table instead of exp() and sin() (#5484)
* If RGBLIGHT_EFFECT_BREATHE_CENTER is undefined, use fixed breathe table instead of exp() and sin()

* Change rgblight breathing table size to be easily selectable.

add RGBLIGHT_BREATHE_TABLE_SIZE macro for customize breathing effect.
2019-05-02 07:59:29 -07:00
XScorpion2 22ba36a4d8 rgblight 255 hue (#5547) 2019-05-01 08:02:02 -07:00
Takeshi ISHII dfab177f88 Add function to support split-keyboard in rgblight.[ch]. (#5020)
* add temporary file that is rgblight.c call graph

* add rgblight_update_hook()

* update rgblight-call-graph.dot (temporary file)

* add more hook point

* add TODO comment

* temporary Revert "add TODO comment"

This reverts commit df6165aac9b3a31d1d3e31ce52aadc134b84eac2.

* temporary Revert "add more hook point"

This reverts commit 64592b06f3bcdaac47c59f922018a273bef76776.

* temporary Revert "add rgblight_update_hook()"

This reverts commit 432b74c912ed4333e6633e20a1bcda10c6a10eaf.

* add rgblight_update_hook()

* add more hook point

* add TODO comment

* implement rgblight_update_hook()

* remove rgblight_update_hook(), add RGBLIGHT_SPLIT_SET_CHANGE_XXXX

rgblight_update_hook() is too large.
change to simple flag setting.

* shrink rgblight_config_t

* implement rgblight_update_sync()

Note: The animation synchronization process has not been implemented yet.

* update quantum/rgblight-call-graph.dot (temporary file)

* rmove quantum/rgblight-call-graph.dot (temporary file)

* update rgblight.c

* Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c .

* fix build break rgblight_update_sync() when all animation off

* fix quantum/rgblight.c:rgblight_disable_XX() add RGBLIGHT_SPLIT_SET_CHANGE_MODE

* quantum/rgblight.c change code order: move rgblight_update_sync()

* add mode_base_table[] to quantum/rgblight.c

* quantum/rgblight.c use mode_base_table[] and rgblight_status.base_mode

* quantum/rgblkght.c animation timer integration

* quantum/rgblkght.c add animation sync for split keyboard

* fix mode_base_table[] and snake effect

* fix build break keyboards/mxss.

keyboards/mxss's local rgblight.c need old version rgblight.h

* rgblight.c: fix animation sync

* quantum/rgblight.c: fix snake effect sync

* quantum/rgblight.c: animation sync interverl 30 sec

* quantum/rgblight.c: fix rgblight_effect_rainbow_swirl() and rgblight_effect_knight()

* quantum/rgblight.c: add macro RGBLIGHT_SPLIT_ANIMATION

* cherry-pick from 'rgblight_modes.h sample implementation'

* fix RGBLIGHT_SPLIT_ANIMATION check position

* Update temporary code in Helix keyboard 'five_rows' keymap to test rgblight.c

* Reduce the firmware size by 1500 bytes when rgblight_effect_breathing() is enabled.

* Changed to rgblight_sethsv_eeprom_helper() for easier reading.

* add fail-safe code to quantum/rgblight.c:rgblight_task(),rgblight_timer_enable()

* remove temporary code in Helix keyboard 'five_rows' keymap

* quantum/rgblight.c: add split-keyboard master side sync functions

add functions:
  uint8_t rgblight_get_change_flags(void);
  void rgblight_clear_change_flags(void);
  void rgblight_get_syncinfo(rgblight_syncinfo_t *syncinfo);

change function:
  void rgblight_update_sync(rgblight_syncinfo_t *syncinfo, bool write_to_eeprom);

* Change rgblight_update_sync() to use write_to_eeprom.

* remove TODO comment from quantum/rgblight.h

* Revert "fix build break keyboards/mxss."

This reverts commit 90b9a1aa7d8af226751500e49e3ea0214cc4e024.
(Separated this change into the newly opened PR #5461.)

* Revert "Reduce the firmware size by 1500 bytes when rgblight_effect_breathing() is enabled."

This reverts commit b61004e63e82cf5334cee4def4ba10cffa88885f.

* update quantum/rgblight.c: Code size reduction when not using RGBLIGHT_SPLIT.

* Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c .

* add temporary pdhelix(Patched Helix) code

* Add temporary code to split_common/transport.c to test rgblight.c.

* Finish testing rgblight.c with helix keyboard.

Revert "Add temporary code to Helix keyboard 'five_rows' keymap to test rgblight.c ."

This reverts commit 0bf81a4723a977adc0cb09b4272ee5c9b4f2bbbb.

* Finish testing rgblight.c with quantum/split_common code.

Revert "Add temporary code to split_common/transport.c to test rgblight.c."

This reverts commit 71db3e24eef40d4c455fb9fd1664e4487c9d927a.

* remove temporary pdhelix(Patched Helix) code

This reverts commit 5287e51a394741bcb6028c7cfc0dd0c984645f76.

* Added description of RGBLIGHT_SPLIT macro to docs/feature_rgblight.md.

* add RGBLIGHT_SPLIT_SET_CHANGE_HSVS to rgblight_init()

* Changed to restart animation only when changing mode.

When changing hue, sat and val, the animation is not restarted and continues.
2019-04-19 15:05:51 -07:00
Danny f077204fae Add support for RGB LEDs wired directly to each half's controller (#5392)
* Add support for wiring RGB LEDs for both halves directly to their respective controllers

RGB LEDs for each half don't need to be chained together across the TRRS cable with this

* Add split RGB LED support for serial

* Update config/rules for bakingpy layout

* Un-nest ifdefs for hand detection

* Read RGB config state from memory instead of EEPROM for serial updates

* Reuse existing LED pointer instead of creating new one
2019-03-23 17:20:14 -07:00
Len Trigg 9c4424ae2c rgblight split transfer non-eeprom config (#5396)
* Make rgblight_update_dword not update eeprom (we already have
eeconfig_update_rgblight for that).

Make split i2c keyboards transfer active rgblight config rather than
eeprom saved version of rgblight config, enabling runtime changes
that aren't persisted to eeprom.

* prev_level and prev_rgb only store successfully transmitted values
2019-03-15 13:46:49 -07:00
Konstantin Đorđević 4e2369693f Move RGBLIGHT_LIMIT_VAL definition from rgblight.c to rgblight.h (#5167) 2019-02-17 19:05:12 -08:00
Erovia 642f6cf14f Add support for using ranges for RGB (#4981)
* Add support for using ranges for RGB

This patch adds support for controlling continuous ranges of RGB LEDs.
Helper functions for split boards are also available.

* RGB Range: Use hardware-platform agnostic wait
2019-02-15 06:52:04 -08:00
Drashna Jaelre cc146e32dc Improve RGB Light code (#4326)
* Improve RGB Light code

* Add is_rgblight_initialized as an externed value in rgblight.h

* Use remander of hue
2019-02-15 06:37:44 -08:00
David Dai b7688590b8 Change rgblight_get_mode & rgb_matrix_get_mode's return type to uint8_t. (#4747)
* Change rgblight_get_mode's return type to uint8_t.

Since rgblight_get_mode() is just returning rgblight_config_t.mode,
it should match rgblight_config_t.mode's type: uint8_t.

* Update rgb_matrix_get_mode to return uint8_t.
2018-12-31 08:42:58 -08:00
Fredric Silberberg 9e6ee47779 Added noeeprom versions of set hue, sat, val, and step 2018-12-13 18:30:15 -08:00
mtei 4bb0fb2ffc A comment indicating the insertion location of the new mode was added. 2018-10-11 17:14:42 -07:00
mtei 661e304033 Add a temporary comment to quantum/rgblight.h to aid migration.
Add a temporary comment. The content is a contrast table of old magic number and new symbol.
2018-10-11 17:14:42 -07:00
Takeshi ISHII 6d6d91c834 rgblight.[ch] more configurable (#3582)
* add temporary test code rgblight-macro-test1.[ch]

* rgblight.h : mode auto numberring and auto generate mode name symbol

No change in build result.

* rgblight.c use RGBLIGHT_MODE_xxx symbols

No change in build result.

* quantum.c use RGBLIGHT_MODE_xxx symbols

No change in build result.

* fix build break. when RGB_MATRIX_ENABLE defined

* add temporary test code rgblight-macro-test2.[ch]

* modify rgblight_mode_eeprom_helper() and rgblight_sethsv_eeprom_helper()

* modify rgblight_task()

* configurable each effect compile on/off in config.h

* update docs/feature_rgblight.md

* fix conflict. docs/feature_rgblight.md

* remove temporary test code rgblight-macro-test*.[ch]

* fix comment typo.

* remove old mode number from comment

* update docs/feature_rgblight.md about effect mode

* Revert "update docs/feature_rgblight.md about effect mode"

This reverts commit 43890663fcc9dda1899df7a37d382fc38b1a6d6d.

* some change docs/feature_rgblight.md

* fix typo

* docs/feature_rgblight.md update: revise mode number table
2018-09-13 10:24:09 -07:00
Brad 595f3cbe5b Added alternating led underglow pattern (#3498)
* added alternating led pattern

* added alternating with rgblight_config values

* removed my comments
2018-07-29 08:42:11 -07:00
That-Canadian 0fab3bbde3 Lets split eh (#3120)
* Line ending stuff again

* Added Let's Split Eh? Files and updated #USE_IC2 checks to also include th EH revision (can only be used in I2C)

* Added personal keymap, updated some of the EH files

* Created new keyboard file for testing "lets_split_eh" will merge into lets_split once fully functional

* Added split code from lets_split, removed pro micro imports and LED code

THIS IS WORKING CODE, WITHOUT RGB AND BACKLIGHT

* Took back original Lets Slit files for the lets_split keyboard, working in the lets_split_eh folder for now

* Updated eh.c

* More rework of the I2C code, added global flags for split boards.

* Introduced RGB over I2C, having weird edge case issues at the moment though

* Fixed weird I2C edgecase with RGB, although still would like to track down route cause..

* Changed RGB keycodes (static ones) to activate on key-up instead of key-down to elimate weird ghosting issue over I2C

* Lots of changes, mainly externalized the Split keyboard code and added logic for only including when needed.

- Added makefile option "SPLIT_KEYBOARD" that when = yes will include the split keyboard files and custom matrix
- Split keyboard files placed into quantum/split_common/
- Added define option for config files "SPLIT_HAND_PIN" FOr using high/low pin to determine handedness, low = right hand, high = left hand
- Cleaned up split logic for RGB and Backlight so it is only exectuted / included when needed

* Updated documentation for the new makefile options and #defines specific to split keyboards

* Added a bit more info to docs, so people aren't confused

* Modifed Let's Split to use externalized code, also added left and right hand eeprom files to the split_common folder

* Removed some debugging from eh.c

* Small changes to keyboard configs. Also added a default keymap (just a copy of my that_canadian keymap).

* Added a README file to the Let's Split Eh?

* Changed it so RGB static updates are done on key-up ONLY for split boards rather than all boards. Also fixed leftover un-used variable in rgblight.c

* Updated default keymap and my keymap for Let's Split Eh? Updated the comments so it reflects RGB control, and removed audio functions.

* Fixed lets_split_eh not having a default version

* Removed "eh" references from lets_split folder for now

* Took lets_split folder from master to fix travis build errors, weird my local was overriding.

* Changed LAYOUT_ortho_4x12_kc -> LAYOUT_kc_ortho_4x12 to match bakingpy and others

* Removed rules.mk from my lets_split keymap, not needed

* Updated the config_options doc to better explain the usage of "#define SPLIT_HAND_PIN"
2018-07-16 22:25:02 -04:00
Takeshi ISHII 5229734647 Add rgblight mode 35 (R,G,B test mode) (#3114)
* add rgblight mode 35 (RGB cyclic mode) into quantum/rgblight.c

* Update docs, add rgblight mode 35(RGB cyclic)

* rename RGBCYCLIC to RGBTEST
2018-06-04 08:10:39 -07:00
Drashna Jaelre 751719e6cb Add and fix _noeeprom functions to many of the RGB Underglow functions (#3070)
* And and fix _noeeprom functions to many of the RGB Underglow functions

* Many functions are unnecessarily calling the eeprom write code. The toggle/enable is command is especially guilty of this, as it writes to EEPROM 3 times.  But rgb mode writes twice, every time it's called. And init resets the rgb eeprom range and then writes back to it twice!
* Fixed the rgblight_sethsv_noeeprom to work as expected, by moving a lot of the code to a helper function.
* Added a noeeprom function for mode, enable, disable, and toggle functions. (didn't bother for increase/decrease stuff, and didn't add new keycodes)
* Add to predefined colors list
* Add new functions to manual/docs

* Update RGB Sleep feature to use _noeeprom

Because that's exactly what it should be doing, actually!
2018-05-29 11:05:22 -04:00
yiancar afacd42368 Add effect speed support for RGB Matrix *No EEPROM yet* (#2922)
* Added Modular keyboards L,R and NUM

Created code modules for the 3 modules of the modular keyboard.
Original idea by MechboardsUK. Uses i2c implementation similar to lets
split

* Remove modular from master

This is to fix incorrect branching

* Add effect speed support for RGB Matrix *No eeprom yet*

Keycodes RGB_SPI and RGB_SPD have been added to increase and decrease effect speed.

Speed is not saved in EEPROM yet as per Jack's request.

* Update rgb_matrix.c

* RGB Matrix speed fix rgblight.h

* More fixes for rgb speed. Speed functions declared but not used in rgblight

* More travis fixes..

* Another one for travis..
2018-05-08 23:23:21 -04:00
U-LANDSRAAD\drashna c1b46206a7 Fix commands and update my userspace (for testing) 2018-03-28 16:55:58 -04:00
kamisamamizu 12e66330c5 Add COSPAD to QMK and add functions to read HSV (#2156)
* Added functions to read HSV values

I have added three functions to rgb_light.c to be able to read the hue, saturation and value from other places.
They are rgblight_get_hue(), rgblight_get_sat(), adn rgblight_get_val().

* Create keymap.c

* Add COSPAD support to QMK

I have ported the COSPAD numpad to qmk.

* Update readme.md

* Update cospad.c
2017-12-17 11:44:13 -05:00
Colin T.A. Gray 16546ee06f Add 'rgblight_disable' and 'rgblight_setrgb_at/rgblight_sethsv_at'
Refactors rgblight_toggle to use rgblight_enable or rgblight_disable
Use 'rgblight_setrgb_at/rgblight_sethsv_at' to control an individual LED
2017-12-08 16:10:42 -05:00
skullydazed ad49db8cd2 Address #1689 by using a formula to define the breathing curve (#1692)
* Address #1689 by using a formula to define the breathing curve and exposing defines to control the shape of the curve.

* Tweak the behavior of breathing for clueboard
2017-10-17 16:47:49 -07:00
Jack Humbert dc7d0c7b74 update to driver separation 2017-09-15 21:43:58 -04:00
skullydazed 4580d3a730 RGB improvements (#1684)
* Allow the knight animation to be restricted to a portion of the LED strip

* Add keys for jumping directly to particular animation modes

* Remove orphaned break statements

* Tweak the `RGB_MODE` buttons so they cycle through the same mode.

* small indentation fix
2017-09-06 14:49:19 -07:00