Commit Graph

258 Commits (40bc5a81923d16f6c9c2a3a05616b8cb1859b01e)

Author SHA1 Message Date
Joel Challis dace4d5f0d
Remove QWIIC_DRIVERS (#14174) 2021-10-09 14:48:27 +01:00
Ryan db41a3426c
Improve Adafruit BLE configuration defines (#14749)
* Improve Adafruit BLE configuration defines

* Formatting
2021-10-08 16:15:20 +01:00
Nick Brassel b2a186cf92
Purge uGFX. (#14720)
* Purge uGFX.

* Remove remnants of visualizer.

* Remove remnants of uGFX.
2021-10-07 10:57:48 +11:00
Ryan 20ea5f3fb5
Relocate Adafruit BLE code (#14530) 2021-09-21 19:58:46 +10:00
QMK Bot bf23e4647b Merge remote-tracking branch 'origin/master' into develop 2021-09-15 17:07:47 +00:00
Drashna Jaelre 169d5bd21d
[Bug] Fix IS31fl3741 driver to accept 1 or 2 addresses (#14451)
Co-authored-by: Joel Challis <git@zvecr.com>
2021-09-15 10:07:08 -07:00
Joel Challis 0ca4a56a04
Refactor use of STM32_SYSCLK (#14430)
* Refactor use of STM32_SYSCLK

* clang
2021-09-14 12:18:36 +10:00
JayceFayne 767f2c0284
[Core] Add `is_oled_scrolling` (#14305) 2021-09-05 09:09:20 -07:00
Xelus22 4e1c5887c5
[Core] Refactor OLED to allow easy addition of other types (#13454)
* add docs

* core changes

* update keyboards to new OLED

* updated users to new OLED

* update layouts to new OLED

* fixup docs

* drashna's suggestion

* fix up docs

* new keyboards with oled

* core split changes

* remaining keyboard files

* Fix The Helix keyboards oled options

* reflect develop

Co-authored-by: Drashna Jaelre <drashna@live.com>
Co-authored-by: mtei <2170248+mtei@users.noreply.github.com>
2021-08-24 16:28:26 +10:00
Drashna Jaelre e08d6a33fc
[Core] Fix copypasta issue with pmw3360 sensor config (#14106) 2021-08-21 18:34:04 -07:00
Drashna Jaelre da1c011afc
Improve pmw3360 sensor and make it more hardware agnostic (#14097) 2021-08-20 21:14:23 -07:00
Nick Brassel afd3bcbf45
Fix up compilation issues. (#14095) 2021-08-21 13:38:38 +10:00
Dasky 7f1c90b7a8
[Core] Speed up pimoroni trackball driver (#13823) 2021-08-19 11:58:17 -07:00
Joel Challis 1bb7af4d44
Relocate platform specific drivers (#13894)
* Relocate platform specific drivers

* Move stm eeprom

* Tidy up slightly
2021-08-17 23:43:09 +01:00
Drashna Jaelre 7ef4d0c886
Fix pmw3360 code to only output debug info if mouse debugging is enabled (#13993) 2021-08-13 14:20:47 -07:00
Joel Challis 70fb3e1aaf
__flash? (#13799) 2021-07-31 14:35:30 +01:00
Joel Challis 206a995ccd
Move some led drivers to common folder (#13749)
* Move some led drivers to common folder
2021-07-31 14:31:09 +01:00
Dasky aeb252435d
[develop] Fix pimoroni trackball read address (#13810) 2021-07-31 06:12:19 -07:00
Joel Challis 3858a784c7
Align AW20216 driver (#13712)
* Align AW20216 driver

* Update drivers/awinic/aw20216.h

Co-authored-by: Ryan <fauxpark@gmail.com>

* Review comments

* formatting fixes

* stop if start failed?

* review comments

Co-authored-by: Ryan <fauxpark@gmail.com>
2021-07-27 23:55:51 +01:00
Drashna Jaelre 9e782e4f14
[Bug] Include gpio.h in solenoid driver for GPIO Control functions (#13716) 2021-07-25 21:24:47 -07:00
Joel Challis f945c352e7
Haptic: driver-> feature (#13713) 2021-07-25 19:14:58 -07:00
Chris Cullin 70267b35c3
Dual RGB Matrix IS31FL3737 driver support to address #13442 (#13457)
* initial commit

* removed changes to write_pwm_buffer

* backward compatbility added

* fixed issue with backward compatibility

* documentation update

* removed unneccessary comment. branched from master

* updated per comments #13457

* removed blank line

* cformat on diff files
2021-07-15 22:52:05 +01:00
Chris Cullin 9c74fd14bc
Enable g_is31_leds PROGMEM for RGB Matrix IS31FL3737 driver (#13480) 2021-07-12 08:51:23 -07:00
Gigahawk 6ac037aa3c
AW20216 use register increment for framebuffer flushes (#13430) 2021-07-03 08:01:23 -07:00
Stefan Kerkmann 117bff17ba
[Core] Unite half-duplex and full-duplex serial drivers (#13081)
* Unite half-duplex and full-duplex serial driver.

* Add full duplex operation mode to the interrupt based driver
* Delete DMA UART based full duplex driver
* The new driver targets #11930

* Fix freezes with failing transactions in half-duplex

* Increase default serial TX/RX buffer size to 128 bytes

* Correctly use bool instead of size_t

Co-authored-by: Nick Brassel <nick@tzarc.org>
2021-07-02 08:24:08 +10:00
Gigahawk 1ea01765e1
Allow settable SPI divisor for AW20216 driver, set default to 4 (#13309) 2021-06-23 19:57:46 +10:00
QMK Bot 531f34d2a0 Merge remote-tracking branch 'origin/master' into develop 2021-06-23 09:52:39 +00:00
David Hoelscher 6e1ed1c9d3
Optional OLED splash screen and fixed OLED i2c execution time saving (#12294)
* Made OLED splash screen optional to reduce memory and fixed OLED i2c execution time saving

* moved OLED address updates into their respective conditional checks
2021-06-23 19:52:06 +10:00
Purdea Andrei dd16d3cc7e
eeprom_i2c driver: added EXTERNAL_EEPROM_WP_PIN configuration option. (#12617) 2021-06-21 19:34:28 -07:00
QMK Bot e28d7ab58c Merge remote-tracking branch 'origin/master' into develop 2021-06-21 20:00:32 +00:00
Drashna Jaelre 6901411bca
Move optical sensor code to drivers folder (#13044) 2021-06-21 21:00:11 +01:00
QMK Bot 40bf61118e Merge remote-tracking branch 'origin/master' into develop 2021-06-20 16:38:52 +00:00
Ryan 90e57b7b0a
OLED font easter egg (#13269) 2021-06-20 09:38:21 -07:00
Roland Huber e4c5b1bbbb
Add Per Key exclusions for Haptic Feedback (#12386)
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-19 19:28:54 -07:00
Ryan 37fba09021
ST7565 invert (#13237) 2021-06-19 18:51:35 +10:00
Ignaz Kevenaar 0311c8036d
Add oled_invert (#13172)
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-19 01:08:22 +10:00
Nick Brassel 172e6a7030
Extensible split data sync (#11930)
* Extensible split data sync capability through transactions.

- Split common transport has been split up between the transport layer
  and data layer.
- Split "transactions" model used, with convergence between I2C and
  serial data definitions.
- Slave matrix "generation count" is used to determine if the full slave
  matrix needs to be retrieved.
- Encoders get the same "generation count" treatment.
- All other blocks of data are synchronised when a change is detected.
- All transmissions have a globally-configurable deadline before a
  transmission is forced (`FORCED_SYNC_THROTTLE_MS`, default 100ms).
- Added atomicity for all core-synced data, preventing partial updates
- Added retries to AVR i2c_master's i2c_start, to minimise the number of
  failed transactions when interrupts are disabled on the slave due to
  atomicity checks.
- Some keyboards have had slight modifications made in order to ensure
  that they still build due to firmware size restrictions.

* Fixup LED_MATRIX compile.

* Parameterise ERROR_DISCONNECT_COUNT.
2021-06-18 09:10:06 +10:00
fauxpark d04f7bc160 Merge remote-tracking branch 'upstream/master' into develop 2021-06-17 17:22:01 +10:00
Ryan 2f08a34394
OLED driver tweaks (#13215) 2021-06-17 17:14:23 +10:00
Jonathan Rascher 83ee79565c
Fix overrun in oled_write_raw when not at (0, 0) (#13204) 2021-06-15 22:30:37 -07:00
Jonathan Rascher d59f8d1c02
Fix overrun in st7565_write_raw when not at (0, 0) (#13209) 2021-06-15 22:30:27 -07:00
Ryan b2fdd48744
Add ST7565 LCD driver (#13089)
Co-authored-by: Joakim Tufvegren <jocke@barbanet.com>
2021-06-10 17:16:09 +10:00
Gigahawk 32b2ac0a80
GMMK Pro RGB Support (#13147)
* Enable SPI1 for GMMK pro

* Setup initial boilerplate for new LED driver

* RGB matrix minimally functional

* Map full LED matrix

* Return keymap to default

* Fix printscreen LED mapping

* Reduce max brightness

* Default values for AW20216

* Add documentation for AW20216

* Disable console and warnings

* Run cformat

* Update drivers/awinic/aw20216.h

Co-authored-by: Drashna Jaelre <drashna@live.com>

* make aw struct match issi struct

Co-authored-by: Drashna Jaelre <drashna@live.com>

* add led location defines

Co-authored-by: Drashna Jaelre <drashna@live.com>

* Use led pin definitions in keyboard.c

* Add driver indices to led map

* Fix elif typo

* Run cformat

* Update docs

* Fix typo in docs

* Document global brightness limits

Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-06-10 11:40:25 +10:00
Ryan 17d0fad762
`spi_master` Kinetis support (#13098) 2021-06-08 19:54:33 +10:00
Ryan 261d94ce34
Tidy up spi_master includes (#13053) 2021-06-03 16:26:41 +10:00
Nick Brassel 597d2e0e7b
Fix up WS2812 SPI driver on F072. (#13022) 2021-06-03 09:48:16 +10:00
James Young 1646c0f26c
2021 May 29 Breaking Changes Update (#13034)
* Add Per Key functionality for AutoShift (#11536)

* LED Matrix: Reactive effect buffers & advanced indicators (#12588)

* [Keyboard] kint36: switch to sym_eager_pk debouncing (#12626)

* [Keyboard] kint2pp: reduce input latency by ≈10ms (#12625)

* LED Matrix: Split (#12633)

* [CI] Format code according to conventions (#12650)

* feat: infinite timeout for leader key (#6580)

* feat: implement leader_no_timeout logic

* docs(leader_key): infinite leader timeout docs

* Format code according to conventions (#12680)

* Update ADC driver for STM32F1xx, STM32F3xx, STM32F4xx (#12403)

* Fix default ADC_RESOLUTION for ADCv3 (and ADCv4)

Recent ChibiOS update removed ADC_CFGR1_RES_10BIT from the ADCv3 headers
(that macro should not have been there, because ADCv3 has CFGR instead of
CFGR1).  Fix the default value for ADC_RESOLUTION to use ADC_CFGR_RES_10BITS
if it is defined (that name is used for ADCv3 and ADCv4).

* Update ADC docs to match the actually used resolution

ADC driver for ChibiOS actually uses the 10-bit resolution by default
(probably to match AVR); fix the documentation accordingly.  Also add
both ADC_CFGR_RES_10BITS and ADC_CFGR1_RES_10BIT constants (these names
differ according to the ADC implementation in the particular MCU).

* Fix pinToMux() for B12 and B13 on STM32F3xx

Testing on STM32F303CCT6 revealed that the ADC mux values for B12 and
B13 pins were wrong.

* Add support for all possible analog pins on STM32F1xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 on STM32F1xx
(they are the same at least for STM32F103x8 and larger F103 devices, and
also F102, F105, F107 families).  Actually tested on STM32F103C8T6
(therefore pins C0...C5 were not tested).

Pins F6...F10, which are present on STM32F103x[C-G] in 144-pin packages,
cannot be supported at the moment, because those pins are connected only
to ADC3, but the ChibiOS ADC driver for STM32F1xx supports only ADC1.

* Add support for all possible analog pins on STM32F4xx

Added ADC mux values for pins A0...A7, B0, B1, C0...C5 and optionally
F3...F10 (if STM32_ADC_USE_ADC3 is enabled).  These mux values are
apparently the same for all F4xx devices, except some smaller devices may
not have ADC3.

Actually tested on STM32F401CCU6, STM32F401CEU6, STM32F411CEU6 (using
various WeAct “Blackpill” boards); only pins A0...A7, B0, B1 were tested.

Pins F3...F10 are inside `#if STM32_ADC_USE_ADC3` because some devices
which don't have ADC3 also don't have the GPIOF port, therefore the code
which refers to Fx pins does not compile.

* Fix STM32F3xx ADC mux table in documentation

The ADC driver documentation had some errors in the mux table for STM32F3xx.
Fix this table to match the datasheet and the actual code (mux settings for
B12 and B13 were also tested on a real STM32F303CCT6 chip).

* Add STM32F1xx ADC pins to the documentation

* Add STM32F4xx ADC pins to the documentation

* Add initial support for tinyuf2 bootloader (when hosted on F411 blackpill) (#12600)

* Add support for jumping to tinyuf2 bootloader. Adds blackpill UF2 example.

* Update flashing.md

* Update chconf.h

* Update config.h

* Update halconf.h

* Update mcuconf.h

* eeprom driver: Refactor where eeprom driver initialisation (and EEPROM emulation initialisation) occurs to make it non-target-specific. (#12671)

* Add support for MCU = STM32F446 (#12619)

* Add support for MCU = STM32F446

* Update platforms/chibios/GENERIC_STM32_F446XE/configs/config.h

* Restore mcuconf.h to the one used by RT-STM32F446RE-NUCLEO64

* stm32f446: update mcuconf.h and board.h for 16MHz operation, with USB enabled, and other peripherals disabled.

* Format code according to conventions (#12682)

* Format code according to conventions (#12687)

* Add STM32L433 and L443 support (#12063)

* initial L433 commit

* change to XC

* fix L433

* disable all peripherals

* update system and peripheral clocks

* 433 change

* use its own board  files

* revert its own board files

* l433 specific change

* fix stm32l432xx define

* remove duplicate #define

* fix bootloader jump

* move to L443xx and add i2c2, spi2, usart3 to mcuconf.h

* move to L443

* move to L443

* fix sdmmc in mcuconf.h

* include STM32L443

* add L443

* Include L443 in compatible microcontrollers

* Include L443 in compatible microcontrollers

* Update config bootloader jump description

* Update ChibiOS define reasoning

* Update quantum/mcu_selection.mk

* fix git conflict

* Updated Function96 with V2 files and removed chconf.h and halconf.h (#12613)

* Fix bad PR merge for #6580. (#12721)

* Change RGB/LED Matrix to use a simple define for USB suspend (#12697)

* [CI] Format code according to conventions (#12731)

* Fixing transport's led/rgb matrix suspend state logic (#12770)

* [CI] Format code according to conventions (#12772)

* Fix comment parsing (#12750)

* Added OLED fade out support (#12086)

* fix some references to bin/qmk that slipped in (#12832)

* Resolve a number of warnings in `qmk generate-api` (#12833)

* New command: qmk console (#12828)

* stash poc

* stash

* tidy up implementation

* Tidy up slightly for review

* Tidy up slightly for review

* Bodge environment to make tests pass

* Refactor away from asyncio due to windows issues

* Filter devices

* align vid/pid printing

* Add hidapi to the installers

* start preparing for multiple hid_listeners

* udev rules for hid_listen

* refactor to move closer to end state

* very basic implementation of the threaded model

* refactor how vid/pid/index are supplied and parsed

* windows improvements

* read the report directly when usage page isn't available

* add per-device colors, the choice to show names or numbers, and refactor

* add timestamps

* Add support for showing bootloaders

* tweak the color for bootloaders

* Align bootloader disconnect with connect color

* add support for showing all bootloaders

* fix the pyusb check

* tweaks

* fix exception

* hide a stack trace behind -v

* add --no-bootloaders option

* add documentation for qmk console

* Apply suggestions from code review

* pyformat

* clean up and flesh out KNOWN_BOOTLOADERS

* Remove pointless SERIAL_LINK_ENABLE rules (#12846)

* Make Swap Hands use PROGMEM (#12284)

This converts the array that the Swap Hands feature uses to use PROGMEM,
and to read from that array, as such. Since this array never changes at
runtime, there is no reason to keep it in memory. Especially for AVR
boards, as memory is a precious resource.

* Fix another bin/qmk reference (#12856)

* [Keymap] Turn OLED off on suspend in soundmonster keymap (#10419)

* Fixup build errors on `develop` branch. (#12723)

* LED Matrix: Effects! (#12651)

* Fix syntax error when compiling for ARM (#12866)

* Remove KEYMAP and LAYOUT_kc (#12160)

* alias KEYMAP to LAYOUT

* remove KEYMAP and LAYOUT_kc

* Add setup, clone, and env to the list of commands we allow even with broken modules (#12868)

* Rename `point_t` -> `led_point_t` (#12864)

* [Keyboard] updated a vendor name / fixed minor keymap issues (#12881)

* Add missing LED Matrix suspend code to suspend.c (#12878)

* LED Matrix: Documentation (#12685)

* Deprecate `send_unicode_hex_string()` (#12602)

* Fix spelling mistake regarding LED Matrix in split_common. (#12888)

* [Keymap] Fix QWERTY/DVORAK status output for kzar keymap (#12895)

* Use milc.subcommand.config instead of qmk.cli.config (#12915)

* Use milc.subcommand.config instead

* pyformat

* remove the config test

* Add function to allow repeated blinking of one layer (#12237)

* Implement function rgblight_blink_layer_repeat to allow repeated blinking of one layer at a time

* Update doc

* Rework rgblight blinking according to requested change

* optimize storage

* Fixup housekeeping from being invoked twice per loop. (#12933)

* matrix: wait for row signal to go HIGH for every row (#12945)

I noticed this discrepancy (last row of the matrix treated differently than the
others) when optimizing the input latency of my keyboard controller, see also
https://michael.stapelberg.ch/posts/2021-05-08-keyboard-input-latency-qmk-kinesis/

Before this commit, when tuning the delays I noticed ghost key presses when
pressing the F2 key, which is on the last row of the keyboard matrix: the
dead_grave key, which is on the first row of the keyboard matrix, would be
incorrectly detected as pressed.

After this commit, all keyboard matrix rows are interpreted correctly.

I suspect that my setup is more susceptible to this nuance than others because I
use GPIO_INPUT_PIN_DELAY=0 and hence don’t have another delay that might mask
the problem.

* ensure we do not conflict with existing keymap aliases (#12976)

* Add support for up to 4 IS31FL3733 drivers (#12342)

* Convert Encoder callbacks to be boolean functions (#12805)

* [Keyboard] Fix Terrazzo build failure (#12977)

* Do not hard set config in CPTC files (#11864)

* [Keyboard] Corne - Remove legacy revision support (#12226)

* [Keymap] Update to Drashna keymap and user code (based on develop) (#12936)

* Add Full-duplex serial driver for ARM boards (#9842)

* Document LED_MATRIX_FRAMEBUFFER_EFFECTS (#12987)

* Backlight: add defines for default level and breathing state (#12560)

* Add dire message about LUFA mass storage bootloader (#13014)

* [Keyboard] Remove redundant legacy and common headers for crkbd (#13023)

Was causing compiler errors on some systems.

* Fix keyboards/keymaps for boolean encoder callback changes (#12985)

* `backlight.c`: include `eeprom.h` (#13024)

* Add changelog for 2021-05-29 Breaking Changes merge (#12939)

* Add ChangeLog for 2021-05-29 Breaking Changes Merge: initial version

* Add recent develop changes

* Sort recent develop changes

* Remove sections for ChibiOS changes per tzarc

No ChibiOS changes this round.

* Add and sort recent develop changes

* add notes about keyboard moves/deletions

* import changelog for PR 12172

Documents the change to BOOTMAGIC_ENABLE.

* update section headings

* re-sort changelog

* add additional note regarding Bootmagic changes

* remove changelog timestamp

* update dates in main Breaking Changes docs

* fix broken section anchors in previous changelogs

* add link to backlight/eeprom patch to changelog

* highlight some more changes

* link PRs from section headers

* Restore standard readme

* run: qmk cformat --core-only
2021-05-29 14:38:50 -07:00
github-actions[bot] 6c5e94061c
[CI] Format code according to conventions (#12838)
Co-authored-by: QMK Bot <hello@qmk.fm>
2021-05-10 03:15:00 +10:00
Purdea Andrei 60a39f4f5d
haptic: correct size of reserved field in the haptic structure. This saves 1 byte of wasted SRAM. (#12483)
Co-authored-by: Drashna Jaelre <drashna@live.com>
2021-05-08 20:45:41 -07:00
Nick Brassel a0089aa345
Fixup Satisfaction75 bootprocess. (#12621)
- Use normal ChibiOS I2C driver.
- Move drawing code to housekeeping -- previously it was during matrix
  scan, which gets executed during bootmagic checks. However, bootmagic
  is invoked before QWIIC subsystem is enabled, which means I2C isn't
  configured yet. All I2C calls to the OLED fail with timeouts while
  bootmagic is being checked. Housekeeping ensures this is executed once
  the system has initialised and settled.
- QWIIC OLED driver: properly clear out OLED buffer when clearing screen.
2021-04-19 13:08:01 +10:00