Submitting ArrowPad, A QMK-based 21/24 key keypad (#372)
* Created arrow pad, a QMK based numpad designed for heavy text editing * Enabled backlighting, numlock indicator, and forced nkro for arrowpad * WIP Arrowpad 21 * WIP Arrowpad 21 * Combined Arrow Pad 21 and 24 * Combined Arrow Pad 21 and 24 * Removed 21 foldermaster
parent
84276ee561
commit
f3086b57e6
|
@ -0,0 +1,158 @@
|
|||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Target file name (without extension).
|
||||
TARGET = arrow_pad
|
||||
|
||||
|
||||
# Directory common source filess exist
|
||||
TOP_DIR = ../..
|
||||
TMK_DIR = ../../tmk_core
|
||||
|
||||
# Directory keyboard dependent files exist
|
||||
TARGET_DIR = .
|
||||
|
||||
# # project specific files
|
||||
SRC = arrow_pad.c
|
||||
|
||||
ifdef KEYMAP
|
||||
SRC := keymaps/$(KEYMAP).c $(SRC)
|
||||
else
|
||||
SRC := keymaps/default.c $(SRC)
|
||||
endif
|
||||
|
||||
CONFIG_H = config.h
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=512
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = yes # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE = yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE = yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
|
||||
|
||||
ifdef KEYMAP
|
||||
|
||||
ifeq ("$(wildcard keymaps/$(KEYMAP).c)","")
|
||||
ifneq ("$(wildcard keymaps/$(KEYMAP)/makefile.mk)","")
|
||||
include keymaps/$(KEYMAP)/makefile.mk
|
||||
endif
|
||||
endif
|
||||
|
||||
else
|
||||
|
||||
ifneq ("$(wildcard keymaps/default/makefile.mk)","")
|
||||
include keymaps/default/makefile.mk
|
||||
endif
|
||||
|
||||
endif
|
||||
|
||||
# Optimize size but this may cause error "relocation truncated to fit"
|
||||
#EXTRALDFLAGS = -Wl,--relax
|
||||
|
||||
# Search Path
|
||||
VPATH += $(TARGET_DIR)
|
||||
VPATH += $(TOP_DIR)
|
||||
VPATH += $(TMK_DIR)
|
||||
|
||||
include $(TOP_DIR)/quantum/quantum.mk
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
arrow_pad keyboard firmware
|
||||
======================
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the parent README.md](/README.md).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the keyboard/arrow_pad folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex - you can then use the Teensy Loader to program your .hex file.
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||
|
||||
### Default
|
||||
To build with the default keymap, simply run `make`.
|
||||
|
||||
### Other Keymaps
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create file named `<name>.c` in the keymaps folder, and see keymap document (you can find in top README.md) and existent keymap files.
|
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with `KEYMAP` option like:
|
||||
```
|
||||
$ make KEYMAP=[default|jack|<name>]
|
||||
```
|
||||
Keymaps follow the format **__\<name\>.c__** and are stored in the `keymaps` folder.
|
|
@ -0,0 +1,114 @@
|
|||
#include "arrow_pad.h"
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
};
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
bool process_action_user(keyrecord_t *record) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
return true;
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
// leave this function blank - it can be defined in a keymap file
|
||||
}
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
backlight_init_ports();
|
||||
#endif
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_action_kb(keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_action_user(record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#define CHANNEL OCR1C
|
||||
|
||||
void backlight_init_ports()
|
||||
{
|
||||
|
||||
// Setup PB7 as output and output low.
|
||||
DDRB |= (1<<7);
|
||||
PORTB &= ~(1<<7);
|
||||
|
||||
// Use full 16-bit resolution.
|
||||
ICR1 = 0xFFFF;
|
||||
|
||||
// I could write a wall of text here to explain... but TL;DW
|
||||
// Go read the ATmega32u4 datasheet.
|
||||
// And this: http://blog.saikoled.com/post/43165849837/secret-konami-cheat-code-to-high-resolution-pwm-on
|
||||
|
||||
// Pin PB7 = OCR1C (Timer 1, Channel C)
|
||||
// Compare Output Mode = Clear on compare match, Channel C = COM1C1=1 COM1C0=0
|
||||
// (i.e. start high, go low when counter matches.)
|
||||
// WGM Mode 14 (Fast PWM) = WGM13=1 WGM12=1 WGM11=1 WGM10=0
|
||||
// Clock Select = clk/1 (no prescaling) = CS12=0 CS11=0 CS10=1
|
||||
|
||||
TCCR1A = _BV(COM1C1) | _BV(WGM11); // = 0b00001010;
|
||||
TCCR1B = _BV(WGM13) | _BV(WGM12) | _BV(CS10); // = 0b00011001;
|
||||
|
||||
backlight_init();
|
||||
}
|
||||
|
||||
void backlight_set(uint8_t level)
|
||||
{
|
||||
if ( level == 0 )
|
||||
{
|
||||
// Turn off PWM control on PB7, revert to output low.
|
||||
TCCR1A &= ~(_BV(COM1C1));
|
||||
CHANNEL = 0x0;
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
}
|
||||
else if ( level == BACKLIGHT_LEVELS )
|
||||
{
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
// Turn on PWM control of PB7
|
||||
TCCR1A |= _BV(COM1C1);
|
||||
// Set the brightness
|
||||
CHANNEL = 0xFFFF;
|
||||
}
|
||||
else
|
||||
{
|
||||
// Prevent backlight blink on lowest level
|
||||
PORTB &= ~(_BV(PORTB7));
|
||||
// Turn on PWM control of PB7
|
||||
TCCR1A |= _BV(COM1C1);
|
||||
// Set the brightness
|
||||
CHANNEL = 0xFFFF >> ((BACKLIGHT_LEVELS - level) * ((BACKLIGHT_LEVELS + 1) / 2));
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
|
@ -0,0 +1,18 @@
|
|||
#ifndef ARROW_PAD_H
|
||||
#define ARROW_PAD_H
|
||||
|
||||
#include "matrix.h"
|
||||
#include "keymap_common.h"
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
#include "backlight.h"
|
||||
#endif
|
||||
#include <avr/io.h>
|
||||
#include <stddef.h>
|
||||
|
||||
void matrix_init_user(void);
|
||||
void matrix_scan_user(void);
|
||||
bool process_action_user(keyrecord_t *record);
|
||||
void led_set_user(uint8_t usb_led);
|
||||
void backlight_init_ports(void);
|
||||
|
||||
#endif
|
|
@ -0,0 +1,158 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x4096
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Nobody
|
||||
#define PRODUCT GoldPad
|
||||
#define DESCRIPTION A custom keyboard
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 4
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
|
||||
#define MATRIX_COL_PINS { B0, B1, B2, B3 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
//#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
//#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
|
@ -0,0 +1,163 @@
|
|||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
|
||||
#include "arrow_pad.h"
|
||||
#include "led.h"
|
||||
|
||||
// This is the 21-key keypad to 2x11 element matrix mapping
|
||||
#define KEYMAP( \
|
||||
KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
|
||||
KM_NUM, KM_FSL, KM_AST, KM_MIN, \
|
||||
KM___7, KM___8, KM___9, KM_EQU, \
|
||||
KM___4, KM___5, KM___6, KM_PLS, \
|
||||
KM___1, KM___2, KM___3, ___ENT, \
|
||||
KM___0, _____0, KM_DOT, KM_ENT \
|
||||
) { \
|
||||
{ KM_ESC, KM_TAB, KM_BSL, KM_ARR }, \
|
||||
{ KM_NUM, KM_FSL, KM_AST, KM_MIN }, \
|
||||
{ KM___7, KM___8, KM___9, KM_EQU }, \
|
||||
{ KM___4, KM___5, KM___6, KM_PLS }, \
|
||||
{ KM___1, KM___2, KM___3, KC_NO }, \
|
||||
{ KM___0, KC_NO, KM_DOT, KM_ENT } \
|
||||
}
|
||||
|
||||
#define LAYER_BASE 0
|
||||
#define LAYER_EDIT 1
|
||||
#define LAYER_FUNCTION 2
|
||||
|
||||
#define MACRO_COPY_CUT 0
|
||||
#define MACRO_SHIFT_CONTROL 1
|
||||
#define MACRO_CONTROL_ALT 2
|
||||
|
||||
#define M_COPY KC_FN5
|
||||
#define M_SHFCT KC_FN6
|
||||
#define M_CTALT KC_FN7
|
||||
|
||||
#define SC_UNDO LCTL(KC_Z)
|
||||
#define SC_REDO LCTL(KC_Y)
|
||||
#define SC_CUT LCTL(KC_X)
|
||||
#define SC_COPY LCTL(KC_C)
|
||||
#define SC_PSTE LCTL(KC_V)
|
||||
#define SC_SELA LCTL(KC_A)
|
||||
#define SC_SAVE LCTL(KC_S)
|
||||
#define SC_OPEN LCTL(KC_O)
|
||||
#define SC_ACLS LALT(KC_F4)
|
||||
#define SC_CCLS LCTL(KC_F4)
|
||||
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[LAYER_BASE] = KEYMAP( \
|
||||
KC_ESC, KC_TAB, KC_BSLS, KC_FN0, \
|
||||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
|
||||
KC_P7, KC_P8, KC_P9, KC_PEQL, \
|
||||
KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_P0, KC_PCMM, KC_PDOT, KC_PENT ),
|
||||
|
||||
[LAYER_EDIT] = KEYMAP( \
|
||||
KC_ESC, KC_TAB, KC_SPC, _______, \
|
||||
KC_FN1, SC_PSTE, SC_REDO, SC_UNDO, \
|
||||
KC_HOME, KC_UP, KC_PGUP, KC_LALT, \
|
||||
KC_LEFT, M_COPY, KC_RGHT, KC_LCTL, \
|
||||
KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \
|
||||
KC_BSPC, KC_PENT, KC_DEL, M_SHFCT),
|
||||
|
||||
[LAYER_FUNCTION] = KEYMAP( \
|
||||
KC_FN2, KC_FN3, KC_FN4, _______, \
|
||||
KC_FN1, _______, _______, _______, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, XXXXXXX, \
|
||||
RESET, _______, _______, _______ ),
|
||||
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION),
|
||||
[1] = ACTION_LAYER_TOGGLE(LAYER_EDIT),
|
||||
[2] = ACTION_BACKLIGHT_TOGGLE(),
|
||||
[3] = ACTION_BACKLIGHT_INCREASE(),
|
||||
[4] = ACTION_BACKLIGHT_DECREASE(),
|
||||
[5] = ACTION_MACRO_TAP(MACRO_COPY_CUT),
|
||||
[6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL),
|
||||
[7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT),
|
||||
|
||||
};
|
||||
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
}
|
||||
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch (id) {
|
||||
|
||||
case MACRO_COPY_CUT:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_LCTL);
|
||||
if (record->tap.count == 1) {
|
||||
register_code(KC_C);
|
||||
unregister_code(KC_C);
|
||||
}
|
||||
else if (record->tap.count == 2) {
|
||||
register_code(KC_X);
|
||||
unregister_code(KC_X);
|
||||
}
|
||||
unregister_code(KC_LCTL);
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_SHIFT_CONTROL:
|
||||
if (record->event.pressed) {
|
||||
if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT));
|
||||
if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL));
|
||||
if (record->tap.count == 3) register_code(KC_PENT);;
|
||||
}
|
||||
else {
|
||||
unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL));
|
||||
unregister_code(KC_PENT);
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_CONTROL_ALT:
|
||||
if (record->event.pressed) {
|
||||
if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL));
|
||||
if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT));
|
||||
}
|
||||
else {
|
||||
unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT));
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led)
|
||||
{
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// output high
|
||||
DDRD |= (1<<6);
|
||||
PORTD |= (1<<6);
|
||||
} else {
|
||||
// Hi-Z
|
||||
DDRD &= ~(1<<6);
|
||||
PORTD &= ~(1<<6);
|
||||
}
|
||||
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||
// output low
|
||||
DDRC |= (1<<7);
|
||||
PORTC |= ~(1<<7);
|
||||
} else {
|
||||
// Hi-Z
|
||||
DDRC &= ~(1<<7);
|
||||
PORTC &= ~(1<<7);
|
||||
}
|
||||
}
|
|
@ -0,0 +1,158 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x4097
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Nobody
|
||||
#define PRODUCT Arrow Pad 21
|
||||
#define DESCRIPTION 21-Key QMK Assistant
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 2
|
||||
#define MATRIX_COLS 11
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D3, D5 }
|
||||
#define MATRIX_COL_PINS { F0, F1, F4, F5, F6, F7, B6, B5, B4, D7, D4 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
//#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
//#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
|
@ -0,0 +1,160 @@
|
|||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
|
||||
#include "arrow_pad.h"
|
||||
#include "led.h"
|
||||
|
||||
// This is the 21-key keypad to 2x11 element matrix mapping
|
||||
#define KEYMAP( \
|
||||
KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
|
||||
KM_NUM, KM_FSL, KM_AST, KM_MIN, \
|
||||
KM___7, KM___8, KM___9, ___PLS, \
|
||||
KM___4, KM___5, KM___6, KM_PLS, \
|
||||
KM___1, KM___2, KM___3, ___ENT, \
|
||||
KM___0, _____0, KM_DOT, KM_ENT \
|
||||
) { \
|
||||
{ KM_ESC, KM_TAB, KM_BSL, KM_ARR, KM___7, KM___8, KM___9, KM_PLS, KM___1, KM___2, KM___3, }, \
|
||||
{ KM_NUM, KM_FSL, KM_AST, KM_MIN, KM___4, KM___5, KM___6, KM_ENT, KC_NO, KM___0, KM_DOT, }, \
|
||||
}
|
||||
|
||||
|
||||
#define LAYER_BASE 0
|
||||
#define LAYER_EDIT 1
|
||||
#define LAYER_FUNCTION 2
|
||||
|
||||
#define MACRO_COPY_CUT 0
|
||||
#define MACRO_SHIFT_CONTROL 1
|
||||
#define MACRO_CONTROL_ALT 2
|
||||
|
||||
#define M_COPY KC_FN5
|
||||
#define M_SHFCT KC_FN6
|
||||
#define M_CTALT KC_FN7
|
||||
|
||||
#define SC_UNDO LCTL(KC_Z)
|
||||
#define SC_REDO LCTL(KC_Y)
|
||||
#define SC_CUT LCTL(KC_X)
|
||||
#define SC_COPY LCTL(KC_C)
|
||||
#define SC_PSTE LCTL(KC_V)
|
||||
#define SC_SELA LCTL(KC_A)
|
||||
#define SC_SAVE LCTL(KC_S)
|
||||
#define SC_OPEN LCTL(KC_O)
|
||||
#define SC_ACLS LALT(KC_F4)
|
||||
#define SC_CCLS LCTL(KC_F4)
|
||||
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[LAYER_BASE] = KEYMAP( \
|
||||
KC_ESC, KC_TAB, KC_BSLS, KC_FN0, \
|
||||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
|
||||
KC_P7, KC_P8, KC_P9, XXXXXXX, \
|
||||
KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_P0, XXXXXXX, KC_PDOT, KC_PENT ),
|
||||
|
||||
[LAYER_EDIT] = KEYMAP( \
|
||||
KC_ESC, KC_TAB, KC_SPC, _______, \
|
||||
KC_FN1, SC_PSTE, SC_REDO, SC_UNDO, \
|
||||
KC_HOME, KC_UP, KC_PGUP, XXXXXXX, \
|
||||
KC_LEFT, M_COPY, KC_RGHT, M_CTALT, \
|
||||
KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \
|
||||
KC_BSPC, XXXXXXX, KC_DEL, M_SHFCT),
|
||||
|
||||
[LAYER_FUNCTION] = KEYMAP( \
|
||||
KC_FN2, KC_FN3, KC_FN4, _______, \
|
||||
KC_FN1, _______, _______, _______, \
|
||||
_______, _______, _______, XXXXXXX, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, XXXXXXX, \
|
||||
RESET, XXXXXXX, _______, _______ ),
|
||||
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION),
|
||||
[1] = ACTION_LAYER_TOGGLE(LAYER_EDIT),
|
||||
[2] = ACTION_BACKLIGHT_TOGGLE(),
|
||||
[3] = ACTION_BACKLIGHT_INCREASE(),
|
||||
[4] = ACTION_BACKLIGHT_DECREASE(),
|
||||
[5] = ACTION_MACRO_TAP(MACRO_COPY_CUT),
|
||||
[6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL),
|
||||
[7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT),
|
||||
|
||||
};
|
||||
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
}
|
||||
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch (id) {
|
||||
|
||||
case MACRO_COPY_CUT:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_LCTL);
|
||||
if (record->tap.count == 1) {
|
||||
register_code(KC_C);
|
||||
unregister_code(KC_C);
|
||||
}
|
||||
else if (record->tap.count == 2) {
|
||||
register_code(KC_X);
|
||||
unregister_code(KC_X);
|
||||
}
|
||||
unregister_code(KC_LCTL);
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_SHIFT_CONTROL:
|
||||
if (record->event.pressed) {
|
||||
if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT));
|
||||
if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL));
|
||||
if (record->tap.count == 3) register_code(KC_PENT);;
|
||||
}
|
||||
else {
|
||||
unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL));
|
||||
unregister_code(KC_PENT);
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_CONTROL_ALT:
|
||||
if (record->event.pressed) {
|
||||
if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL));
|
||||
if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT));
|
||||
}
|
||||
else {
|
||||
unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT));
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led)
|
||||
{
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// output high
|
||||
DDRD |= (1<<6);
|
||||
PORTD |= (1<<6);
|
||||
} else {
|
||||
// Hi-Z
|
||||
DDRD &= ~(1<<6);
|
||||
PORTD &= ~(1<<6);
|
||||
}
|
||||
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||
// output low
|
||||
DDRC |= (1<<7);
|
||||
PORTC |= ~(1<<7);
|
||||
} else {
|
||||
// Hi-Z
|
||||
DDRC &= ~(1<<7);
|
||||
PORTC &= ~(1<<7);
|
||||
}
|
||||
}
|
|
@ -0,0 +1,17 @@
|
|||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
CONFIG_H = keymaps/$(KEYMAP)/config.h
|
|
@ -0,0 +1,158 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x4096
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER Nobody
|
||||
#define PRODUCT Arrow Pad 24
|
||||
#define DESCRIPTION 24-Key QMK Assistant
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 6
|
||||
#define MATRIX_COLS 4
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F0, F1, F4, F5, F6, F7 }
|
||||
#define MATRIX_COL_PINS { B0, B1, B2, B3 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION ROW2COL
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
//#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
//#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
|
@ -0,0 +1,163 @@
|
|||
// This is the canonical layout file for the Quantum project. If you want to add another keyboard,
|
||||
// this is the style you want to emulate.
|
||||
|
||||
#include "arrow_pad.h"
|
||||
#include "led.h"
|
||||
|
||||
// This is the 21-key keypad to 2x11 element matrix mapping
|
||||
#define KEYMAP( \
|
||||
KM_ESC, KM_TAB, KM_BSL, KM_ARR, \
|
||||
KM_NUM, KM_FSL, KM_AST, KM_MIN, \
|
||||
KM___7, KM___8, KM___9, KM_EQU, \
|
||||
KM___4, KM___5, KM___6, KM_PLS, \
|
||||
KM___1, KM___2, KM___3, ___ENT, \
|
||||
KM___0, _____0, KM_DOT, KM_ENT \
|
||||
) { \
|
||||
{ KM_ESC, KM_TAB, KM_BSL, KM_ARR }, \
|
||||
{ KM_NUM, KM_FSL, KM_AST, KM_MIN }, \
|
||||
{ KM___7, KM___8, KM___9, KM_EQU }, \
|
||||
{ KM___4, KM___5, KM___6, KM_PLS }, \
|
||||
{ KM___1, KM___2, KM___3, KC_NO }, \
|
||||
{ KM___0, KC_NO, KM_DOT, KM_ENT } \
|
||||
}
|
||||
|
||||
#define LAYER_BASE 0
|
||||
#define LAYER_EDIT 1
|
||||
#define LAYER_FUNCTION 2
|
||||
|
||||
#define MACRO_COPY_CUT 0
|
||||
#define MACRO_SHIFT_CONTROL 1
|
||||
#define MACRO_CONTROL_ALT 2
|
||||
|
||||
#define M_COPY KC_FN5
|
||||
#define M_SHFCT KC_FN6
|
||||
#define M_CTALT KC_FN7
|
||||
|
||||
#define SC_UNDO LCTL(KC_Z)
|
||||
#define SC_REDO LCTL(KC_Y)
|
||||
#define SC_CUT LCTL(KC_X)
|
||||
#define SC_COPY LCTL(KC_C)
|
||||
#define SC_PSTE LCTL(KC_V)
|
||||
#define SC_SELA LCTL(KC_A)
|
||||
#define SC_SAVE LCTL(KC_S)
|
||||
#define SC_OPEN LCTL(KC_O)
|
||||
#define SC_ACLS LALT(KC_F4)
|
||||
#define SC_CCLS LCTL(KC_F4)
|
||||
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[LAYER_BASE] = KEYMAP( \
|
||||
KC_ESC, KC_TAB, KC_BSLS, KC_FN0, \
|
||||
KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS, \
|
||||
KC_P7, KC_P8, KC_P9, KC_PEQL, \
|
||||
KC_P4, KC_P5, KC_P6, KC_PPLS, \
|
||||
KC_P1, KC_P2, KC_P3, XXXXXXX, \
|
||||
KC_P0, KC_PCMM, KC_PDOT, KC_PENT ),
|
||||
|
||||
[LAYER_EDIT] = KEYMAP( \
|
||||
KC_ESC, KC_TAB, KC_SPC, _______, \
|
||||
KC_FN1, SC_PSTE, SC_REDO, SC_UNDO, \
|
||||
KC_HOME, KC_UP, KC_PGUP, KC_LALT, \
|
||||
KC_LEFT, M_COPY, KC_RGHT, KC_LCTL, \
|
||||
KC_END, KC_DOWN, KC_PGDN, XXXXXXX, \
|
||||
KC_BSPC, KC_PENT, KC_DEL, M_SHFCT),
|
||||
|
||||
[LAYER_FUNCTION] = KEYMAP( \
|
||||
KC_FN2, KC_FN3, KC_FN4, _______, \
|
||||
KC_FN1, _______, _______, _______, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, _______, \
|
||||
_______, _______, _______, XXXXXXX, \
|
||||
RESET, _______, _______, _______ ),
|
||||
|
||||
};
|
||||
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_LAYER_MOMENTARY(LAYER_FUNCTION),
|
||||
[1] = ACTION_LAYER_TOGGLE(LAYER_EDIT),
|
||||
[2] = ACTION_BACKLIGHT_TOGGLE(),
|
||||
[3] = ACTION_BACKLIGHT_INCREASE(),
|
||||
[4] = ACTION_BACKLIGHT_DECREASE(),
|
||||
[5] = ACTION_MACRO_TAP(MACRO_COPY_CUT),
|
||||
[6] = ACTION_MACRO_TAP(MACRO_SHIFT_CONTROL),
|
||||
[7] = ACTION_MACRO_TAP(MACRO_CONTROL_ALT),
|
||||
|
||||
};
|
||||
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
}
|
||||
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch (id) {
|
||||
|
||||
case MACRO_COPY_CUT:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_LCTL);
|
||||
if (record->tap.count == 1) {
|
||||
register_code(KC_C);
|
||||
unregister_code(KC_C);
|
||||
}
|
||||
else if (record->tap.count == 2) {
|
||||
register_code(KC_X);
|
||||
unregister_code(KC_X);
|
||||
}
|
||||
unregister_code(KC_LCTL);
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_SHIFT_CONTROL:
|
||||
if (record->event.pressed) {
|
||||
if (record->tap.count <= 2) register_mods(MOD_BIT(KC_LSFT));
|
||||
if (record->tap.count == 2) register_mods(MOD_BIT(KC_LCTL));
|
||||
if (record->tap.count == 3) register_code(KC_PENT);;
|
||||
}
|
||||
else {
|
||||
unregister_mods(MOD_BIT(KC_LSFT) | MOD_BIT(KC_LCTL));
|
||||
unregister_code(KC_PENT);
|
||||
}
|
||||
break;
|
||||
|
||||
case MACRO_CONTROL_ALT:
|
||||
if (record->event.pressed) {
|
||||
if (record->tap.count < 2) register_mods(MOD_BIT(KC_LCTL));
|
||||
if (record->tap.count >= 2) register_mods(MOD_BIT(KC_LALT));
|
||||
}
|
||||
else {
|
||||
unregister_mods(MOD_BIT(KC_LCTL) | MOD_BIT(KC_LALT));
|
||||
}
|
||||
break;
|
||||
}
|
||||
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led)
|
||||
{
|
||||
if (usb_led & (1<<USB_LED_CAPS_LOCK)) {
|
||||
// output high
|
||||
DDRD |= (1<<6);
|
||||
PORTD |= (1<<6);
|
||||
} else {
|
||||
// Hi-Z
|
||||
DDRD &= ~(1<<6);
|
||||
PORTD &= ~(1<<6);
|
||||
}
|
||||
if (usb_led & (1<<USB_LED_NUM_LOCK)) {
|
||||
// output low
|
||||
DDRC |= (1<<7);
|
||||
PORTC |= ~(1<<7);
|
||||
} else {
|
||||
// Hi-Z
|
||||
DDRC &= ~(1<<7);
|
||||
PORTC &= ~(1<<7);
|
||||
}
|
||||
}
|
|
@ -0,0 +1,17 @@
|
|||
BOOTMAGIC_ENABLE = yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = no # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
CONFIG_H = keymaps/$(KEYMAP)/config.h
|
Loading…
Reference in New Issue