Update to drashna userspace and keymaps (#4459)

* Fix reversed bool check in layer_state_set

* Add Quefrency 65 for a friend

* Add Ergodox EZ Glow keymap

* Add RGB Matrix Code

* Further changes to rgb matrix ErgoDox EZ

* Update bjohnson keymaps

* Fix CRKBD display

* Overhaul to corne keyboard

* Narrow scope for keylogger

* Minor layout tweaks to Corne Keyboard

* additional CRKBD tweaks

* Minor tweaks to CRKBD

* Add all characters for keylogger

* Ergodox EZ Glow overhaul

* Fix Ergodox EZ Glow layer colors

* Increase Tapping Term for Corne Keyboard

* Fix unicode-ish

* Revert some changes

* Add layer specific lighting effects

* Some minor tweaks to ergodox glow config

* revert changes to ergodox files

* Update Glow readme

* Add more tapping term defines

* Fix changes

* Fix ergodox keymap

* Hopefully fix sleeping

* Disable layer indications if rgb matrix is disabled

* Add support for sleeping and rgb layer change toggle to ergodox ez glow

* Make RGB Layer Indication Great Again

* Make Unicode Great Again

* Remove placeholder define

Co-Authored-By: drashna <drashna@live.com>

* Remove placeholder define

Co-Authored-By: drashna <drashna@live.com>

* Remove old EEPROM Reset keycode
master
Drashna Jaelre 2018-11-26 16:45:24 -08:00 committed by MechMerlin
parent edb6c98fd2
commit ecd21b44a8
25 changed files with 576 additions and 112 deletions

View File

@ -41,5 +41,10 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define RGBLIGHT_HUE_STEP 8
#define RGBLIGHT_SAT_STEP 8
#define RGBLIGHT_VAL_STEP 8
#define RGBLIGHT_LIMIT_VAL 120
#define RGBLIGHT_LIMIT_VAL 100
#endif
#ifdef AUDIO_ENABLE
#define B6_AUDIO
// #define NO_MUSIC_MODE
#endif

View File

@ -26,10 +26,10 @@ enum crkbd_keycodes {
K21, K22, K23, K24, K25, K26, K27, K28, K29, K2A \
) \
LAYOUT_wrapper( \
KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_BSPC, \
KC_TAB, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_QUOT, \
KC_ESC, K01, K02, K03, K04, K05, K06, K07, K08, K09, K0A, KC_MINS, \
KC_TAB, ALT_T(K11), K12, K13, K14, K15, K16, K17, K18, K19, K1A, RGUI_T(KC_QUOT), \
OS_LSFT, CTL_T(K21), K22, K23, K24, K25, K26, K27, K28, K29, CTL_T(K2A), OS_RSFT, \
LT(_LOWER,KC_GRV), KC_SPC, LALT_T(KC_BSPC), KC_DEL, KC_ENT, RAISE \
LT(_LOWER,KC_GRV), KC_SPC, KC_BSPC, KC_DEL, KC_ENT, RAISE \
)
#define LAYOUT_crkbd_base_wrapper(...) LAYOUT_crkbd_base(__VA_ARGS__)
@ -66,14 +66,14 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
),
[_LOWER] = LAYOUT_wrapper(
KC_TILD, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_BSPC,
KC_F11, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_PIPE,
KC_F12, _________________LOWER_L3__________________, _________________LOWER_R3__________________, _______,
KC_F11, _________________LOWER_L1__________________, _________________LOWER_R1__________________, KC_F11,
KC_F12, _________________LOWER_L2__________________, _________________LOWER_R2__________________, KC_PIPE,
_______, _________________LOWER_L3__________________, _________________LOWER_R3__________________, _______,
_______, _______, _______, _______, _______, _______
),
[_RAISE] = LAYOUT_wrapper( \
KC_GRV, _________________RAISE_L1__________________, _________________RAISE_R1__________________, KC_BSPC,
_______, _________________RAISE_L1__________________, _________________RAISE_R1__________________, _______,
_______, _________________RAISE_L2__________________, _________________RAISE_R2__________________, KC_BSLS,
_______, _________________RAISE_L3__________________, _________________RAISE_R3__________________, _______,
_______, _______, _______, _______, _______, _______
@ -81,18 +81,13 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_ADJUST] = LAYOUT_wrapper( \
KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET,
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EPRM,
TG_MODS, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY,
_______, _______, _______, _______, _______, _______
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
_______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, KC_MPLY,
_______, _______, _______, KC_NUKE, TG_MODS, _______
)
};
int RGB_current_mode;
void matrix_init_keymap(void) {
#ifdef RGBLIGHT_ENABLE
RGB_current_mode = rgblight_config.mode;
#endif
//SSD1306 OLED init, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
iota_gfx_init(!has_usb()); // turns on the display
@ -102,30 +97,106 @@ void matrix_init_keymap(void) {
PORTD &= ~(1<<5);
DDRB &= ~(1<<0);
PORTB &= ~(1<<0);}
PORTB &= ~(1<<0);
}
//SSD1306 OLED update loop, make sure to add #define SSD1306OLED in config.h
#ifdef SSD1306OLED
// When add source files to SRC in rules.mk, you can use functions.
const char *read_layer_state(void);
const char *read_logo(void);
void set_keylog(uint16_t keycode, keyrecord_t *record);
const char *read_keylog(void);
const char *read_keylogs(void);
char layer_state_str[24];
char modifier_state_str[24];
char host_led_state_str[24];
char keylog_str[24] = {};
char keylogs_str[21] = {};
int keylogs_str_idx = 0;
// const char *read_mode_icon(bool swap);
const char *read_host_led_state(void);
// void set_timelog(void);
// const char *read_timelog(void);
const char code_to_name[60] = {
' ', ' ', ' ', ' ', 'a', 'b', 'c', 'd', 'e', 'f',
'g', 'h', 'i', 'j', 'k', 'l', 'm', 'n', 'o', 'p',
'q', 'r', 's', 't', 'u', 'v', 'w', 'x', 'y', 'z',
'1', '2', '3', '4', '5', '6', '7', '8', '9', '0',
'R', 'E', 'B', 'T', '_', '-', '=', '[', ']', '\\',
'#', ';', '\'', '`', ',', '.', '/', ' ', ' ', ' '};
void set_keylog(uint16_t keycode, keyrecord_t *record) {
char name = ' ';
if (keycode < 60) {
name = code_to_name[keycode];
}
// update keylog
snprintf(keylog_str, sizeof(keylog_str), "%dx%d, k%2d : %c",
record->event.key.row, record->event.key.col,
keycode, name);
// update keylogs
if (keylogs_str_idx == sizeof(keylogs_str) - 1) {
keylogs_str_idx = 0;
for (int i = 0; i < sizeof(keylogs_str) - 1; i++) {
keylogs_str[i] = ' ';
}
}
keylogs_str[keylogs_str_idx] = name;
keylogs_str_idx++;
}
const char *read_keylog(void) {
return keylog_str;
}
const char *read_keylogs(void) {
return keylogs_str;
}
const char* read_modifier_state(void) {
uint8_t modifiers = get_mods();
uint8_t one_shot = get_oneshot_mods();
snprintf(modifier_state_str, sizeof(modifier_state_str), "Mods:%s %s %s %s",
(modifiers & MODS_CTRL_MASK || one_shot & MODS_CTRL_MASK) ? "CTL" : " ",
(modifiers & MODS_GUI_MASK || one_shot & MODS_GUI_MASK) ? "GUI" : " ",
(modifiers & MODS_ALT_MASK || one_shot & MODS_ALT_MASK) ? "ALT" : " ",
(modifiers & MODS_SHIFT_MASK || one_shot & MODS_SHIFT_MASK) ? "SFT" : " "
);
return modifier_state_str;
}
const char *read_host_led_state(void) {
uint8_t leds = host_keyboard_leds();
snprintf(host_led_state_str, sizeof(host_led_state_str), "NL:%s CL:%s SL:%s",
(leds & (1 << USB_LED_NUM_LOCK)) ? "on" : "- ",
(leds & (1 << USB_LED_CAPS_LOCK)) ? "on" : "- ",
(leds & (1 << USB_LED_SCROLL_LOCK)) ? "on" : "- "
);
return host_led_state_str;
}
const char* read_layer_state(void) {
switch (layer_state) {
switch (biton32(layer_state)) {
case _RAISE:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise ");
break;
case _LOWER:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower ");
break;
case _ADJUST:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust ");
break;
default:
switch (biton32(default_layer_state)) {
case _QWERTY:
switch (default_layer_state) {
case _QWERTY:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: QWERTY");
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Qwerty ");
break;
case _COLEMAK:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Colemak");
@ -138,17 +209,6 @@ const char* read_layer_state(void) {
break;
}
break;
case _RAISE:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Raise");
break;
case _LOWER:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Lower");
break;
case _ADJUST:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Adjust");
break;
default:
snprintf(layer_state_str, sizeof(layer_state_str), "Layer: Undef-%ld", layer_state);
}
return layer_state_str;
@ -162,10 +222,11 @@ void matrix_render_user(struct CharacterMatrix *matrix) {
if (is_master) {
//If you want to change the display of OLED, you need to change here
matrix_write_ln(matrix, read_layer_state());
matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_modifier_state());
// matrix_write_ln(matrix, read_keylog());
matrix_write_ln(matrix, read_keylogs());
// matrix_write_ln(matrix, read_mode_icon(keymap_config.swap_lalt_lgui));
matrix_write_ln(matrix, read_host_led_state());
matrix_write(matrix, read_host_led_state());
//matrix_write_ln(matrix, read_timelog());
} else {
matrix_write(matrix, read_logo());
@ -187,8 +248,14 @@ void iota_gfx_task_user(void) {
}
bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
if (record->event.pressed) {
set_keylog(keycode, record);
switch (keycode) {
case KC_A ... KC_SLASH:
case KC_F1 ... KC_F12:
case KC_INSERT ... KC_UP:
case KC_KP_SLASH ... KC_KP_DOT:
case KC_F13 ... KC_F24:
if (record->event.pressed) { set_keylog(keycode, record); }
break;
// set_timelog();
}
return true;

View File

@ -20,12 +20,14 @@ SWAP_HANDS_ENABLE = no # Enable one-hand typing
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
BOOTLOADER = qmk-dfu
# If you want to change the display of OLED, you need to change here
SRC += ./lib/glcdfont.c \
./lib/rgb_state_reader.c \
./lib/logo_reader.c \
./lib/keylogger.c \
./lib/host_led_state_reader.c \
# ./lib/layer_state_reader.c \
# ./lib/keylogger.c \
# ./lib/host_led_state_reader.c \
# ./lib/mode_icon_reader.c \
# ./lib/layer_state_reader.c \
# ./lib/timelogger.c \

View File

@ -79,7 +79,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_ADJUST] = LAYOUT_wrapper(
KC_MAKE, _______, _______, _______, _______, _______, _________________ADJUST_R1_________________, KC_RST,
VRSN, _________________ADJUST_L1_________________, KC_NUKE, _______, _______, _______, _______, EPRM,
VRSN, _________________ADJUST_L1_________________, KC_NUKE, _______, _______, _______, _______, EEP_RST,
_______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG_MODS,
_______, _________________ADJUST_L3_________________, TG_GAME, _______, _________________ADJUST_R3_________________, KC_MPLY,
_______, _______, _______, _______, _______, _______

View File

@ -8,7 +8,7 @@ RGBLIGHT_ENABLE = yes
AUDIO_ENABLE = yes
NKRO_ENABLE = yes
BACKLIGHT_ENABLE = no
SWAP_HANDS_ENABLE = yes
SWAP_HANDS_ENABLE = no
INDICATOR_LIGHTS = yes
MACROS_ENABLED = no

View File

@ -91,7 +91,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_ADJUST] = LAYOUT_wrapper(\
KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RESET,
VRSN, _________________ADJUST_L2_________________, _______, _______, _______, KC_NUKE, _________________ADJUST_R2_________________, EPRM,
VRSN, _________________ADJUST_L2_________________, _______, _______, _______, KC_NUKE, _________________ADJUST_R2_________________, EEP_RST,
TG_MODS, _________________ADJUST_L3_________________, _______, _______, _______, _______, _______, _______, _________________ADJUST_R3_________________, KC_MPLY
)
};

View File

@ -0,0 +1,41 @@
/*
This is the c configuration file for the keymap
Copyright 2012 Jun Wako <wakojun@gmail.com>
Copyright 2015 Jack Humbert
Copyright 2018 Danny Nguyen <danny@keeb.io>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
/* Use I2C or Serial, not both */
#define USE_SERIAL
// #define USE_I2C
#define TAPPING_TERM 500
#define IGNORE_MOD_TAP_INTERRUPT
#define PERMISSIVE_HOLD
#define FORCE_NKRO
#define RETRO_TAPPING
#define TAPPING_TOGGLE 1
#define NO_ACTION_MACRO
#define NO_ACTION_FUNCTION
#define RGBLIGHT_SLEEP

View File

@ -0,0 +1,33 @@
#include QMK_KEYBOARD_H
extern keymap_config_t keymap_config;
// Each layer gets a name for readability, which is then used in the keymap matrix below.
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
// Layer names don't all need to be of the same length, obviously, and you can also skip them
// entirely and just use numbers.
#define _BASE 0
#define _FN1 1
enum custom_keycodes {
QWERTY = SAFE_RANGE,
};
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_BASE] = LAYOUT_65(
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, XXXXXXX, KC_BSPC, KC_HOME, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_END, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_DEL, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_INS, \
KC_LCTL, KC_LGUI, KC_LALT, LT(_FN1,KC_SPC),KC_SPC, KC_SPC, XXXXXXX, KC_RALT, KC_RGUI, XXXXXXX, KC_APP, KC_RCTL, TT(_FN1)
),
[_FN1] = LAYOUT_65(
KC_TILD, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, XXXXXXX, KC_BSPC, KC_PGUP, \
_______, _______, KC_UP, _______, _______, _______, _______, KC_P7, KC_P8, KC_P9, _______, _______, _______, _______, KC_PGDN, \
_______, KC_LEFT, KC_DOWN, KC_RGHT, _______, _______, _______, KC_P4, KC_P5, KC_P6, _______, _______, _______, _______, \
_______, RGB_MOD, RGB_HUI, RGB_HUD, _______, _______, _______, KC_P1, KC_P2, KC_P3, _______, _______, _______, _______, \
_______, _______, _______, _______, _______, KC_P0, XXXXXXX, _______, _______, XXXXXXX, _______, _______, _______
)
};

View File

@ -0,0 +1,22 @@
BOOTLOADER = atmel-dfu
# Build Options
# change to "no" to disable the options, or define them in the Makefile in
# the appropriate keymap folder that will get included automatically
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration(+1000)
MOUSEKEY_ENABLE = no # Mouse keys(+4700)
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = yes # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight.
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
SPLIT_KEYBOARD = yes

View File

@ -60,7 +60,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_MEDIA] = LAYOUT_ortho_5x7(
KC_MAKE, KC_RESET,MU_TOG, AU_ON, AU_OFF, CK_TOGG, RGB_SAD,
MEDIA, EPRM, KC_RGB_T,RGB_M_P, RGB_M_B, RGB_M_R, RGB_SAI,
MEDIA, EEP_RST, KC_RGB_T,RGB_M_P, RGB_M_B, RGB_M_R, RGB_SAI,
RGB_TOG, RGB_MOD, RGB_RMOD,RGB_M_SW,RGB_M_SN,RGB_M_K, RGB_HUD,
KC_MPLY, KC_MPRV, KC_MNXT, RGB_M_X, RGB_M_G, RGB_M_P, RGB_HUI,
KC_MUTE, KC_VOLD, KC_VOLU, XXXXXXX, XXXXXXX, RGB_VAD, RGB_VAI
@ -94,5 +94,3 @@ void matrix_init_keymap(void) {
DDRB &= ~(1<<0);
PORTB &= ~(1<<0);
}

View File

@ -20,8 +20,13 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#ifdef UNICODEMAP_ENABLE
#include "drashna_unicode.h"
#endif // UNICODEMAP_ENABLE
extern uint8_t input_mode;
#ifdef RGB_MATRIX_ENABLE
extern bool g_suspend_state;
extern rgb_config_t rgb_matrix_config;
#endif
extern userspace_config_t userspace_config;
//enum more_custom_keycodes {
// KC_P00 = NEW_SAFE_RANGE
@ -40,7 +45,7 @@ bool skip_leds = false;
KC_TAB, K01, K02, K03, K04, K05, TG(_DIABLO), TG(_DIABLO), K06, K07, K08, K09, K0A, KC_BSLS, \
KC_C1R3, K11, K12, K13, K14, K15, K16, K17, K18, K19, K1A, KC_QUOT, \
KC_MLSF, CTL_T(K21), K22, K23, K24, K25, TG(_GAMEPAD), TG(_GAMEPAD), K26, K27, K28, K29, CTL_T(K2A), KC_MRSF, \
KC_GRV, OSM(MOD_MEH),OSM(MOD_LGUI),KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, UC_SHRG, \
KC_GRV, OS_MEH, OS_HYPR, KC_LBRC, KC_RBRC, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, UC(0x2E2E), \
OS_LALT, OS_LGUI, OS_RGUI, CTL_T(KC_ESCAPE), \
KC_HOME, KC_PGUP, \
LT(_LOWER, KC_SPACE),KC_BSPC, KC_END, KC_PGDN, KC_DEL, LT(_RAISE, KC_ENTER) \
@ -263,7 +268,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_ADJUST] = LAYOUT_ergodox_pretty_wrapper(
KC_MAKE, _______, _______, _______, _______, _______, _______, KC_NUKE, _________________ADJUST_R1_________________, KC_RST,
VRSN, _________________ADJUST_L1_________________, _______, _______, _______, _______, _______, _______, _______, EPRM,
VRSN, _________________ADJUST_L1_________________, _______, _______, _______, _______, _______, _______, _______, EEP_RST,
_______, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, TG(_MODS),
_______, _________________ADJUST_L3_________________, _______, _______, _________________ADJUST_R3_________________, KC_MPLY,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
@ -290,10 +295,6 @@ bool process_record_keymap(uint16_t keycode, keyrecord_t *record) {
return true;
}
void matrix_init_keymap(void) { // Runs boot tasks for keyboard
};
void matrix_scan_keymap(void) { // runs frequently to update info
uint8_t modifiers = get_mods();
uint8_t led_usb_state = host_keyboard_leds();
@ -335,3 +336,106 @@ bool indicator_is_this_led_used_keyboard(uint8_t index) {
return false;
}
}
#ifdef RGB_MATRIX_ENABLE
void suspend_power_down_keymap(void) {
rgb_matrix_set_suspend_state(true);
rgb_matrix_config.enable = false;
}
void suspend_wakeup_init_keymap(void) {
rgb_matrix_config.enable = true;
rgb_matrix_set_suspend_state(false);
}
void rgb_matrix_layer_helper (uint8_t red, uint8_t green, uint8_t blue) {
rgb_led led;
for (int i = 0; i < DRIVER_LED_TOTAL; i++) {
led = g_rgb_leds[i];
if (led.matrix_co.raw < 0xFF) {
if (led.modifier) {
rgb_matrix_set_color( i, red, green, blue );
}
}
}
}
void rgb_matrix_indicators_user(void) {
if (g_suspend_state || !rgb_matrix_config.enable || !userspace_config.rgb_layer_change) return;
switch (biton32(layer_state)) {
case _MODS:
rgb_matrix_layer_helper(0xFF, 0xFF, 0x00); break;
case _GAMEPAD:
rgb_matrix_layer_helper(0xFF, 0x80, 0x00);
rgb_matrix_set_color(32, 0x00, 0xFF, 0x00); // Q
rgb_matrix_set_color(31, 0x00, 0xFF, 0xFF); // W
rgb_matrix_set_color(30, 0xFF, 0x00, 0x00); // E
rgb_matrix_set_color(29, 0xFF, 0x80, 0x00); // R
rgb_matrix_set_color(37, 0x00, 0xFF, 0xFF); // A
rgb_matrix_set_color(36, 0x00, 0xFF, 0xFF); // S
rgb_matrix_set_color(35, 0x00, 0xFF, 0xFF); // D
rgb_matrix_set_color(34, 0x7A, 0x00, 0xFF); // F
rgb_matrix_set_color(27, 0xFF, 0xFF, 0xFF); // 1
rgb_matrix_set_color(26, 0x00, 0xFF, 0x00); // 2
rgb_matrix_set_color(25, 0x7A, 0x00, 0xFF); // 3
break;
case _DIABLO:
rgb_matrix_layer_helper(0xFF, 0x00, 0x00); break;
case _RAISE:
rgb_matrix_layer_helper(0xFF, 0xFF, 0x00); break;
case _LOWER:
rgb_matrix_layer_helper(0x00, 0xFF, 0x00); break;
case _ADJUST:
rgb_matrix_layer_helper(0xFF, 0x00, 0x00); break;
default:
switch (biton32(default_layer_state)) {
case _QWERTY:
rgb_matrix_layer_helper(0x00, 0xFF, 0xFF); break;
case _COLEMAK:
rgb_matrix_layer_helper(0xFF, 0x00, 0xFF); break;
case _DVORAK:
rgb_matrix_layer_helper(0x00, 0xFF, 0x00); break;
case _WORKMAN:
rgb_matrix_layer_helper(0xD9, 0xA5, 0x21); break;
}
}
#if 0
if (this_mod & MODS_SHIFT_MASK || this_led & (1<<USB_LED_CAPS_LOCK) || this_osm & MODS_SHIFT_MASK) {
rgb_matrix_set_color(24, 0x00, 0xFF, 0x00);
rgb_matrix_set_color(36, 0x00, 0xFF, 0x00);
}
if (this_mod & MODS_CTRL_MASK || this_osm & MODS_CTRL_MASK) {
rgb_matrix_set_color(25, 0xFF, 0x00, 0x00);
rgb_matrix_set_color(34, 0xFF, 0x00, 0x00);
rgb_matrix_set_color(37, 0xFF, 0x00, 0x00);
}
if (this_mod & MODS_GUI_MASK || this_osm & MODS_GUI_MASK) {
rgb_matrix_set_color(39, 0xFF, 0xD9, 0x00);
}
if (this_mod & MODS_ALT_MASK || this_osm & MODS_ALT_MASK) {
rgb_matrix_set_color(38, 0x00, 0x00, 0xFF);
}
#endif
}
void matrix_init_keymap(void) {
#ifdef RGB_MATRIX_KEYPRESSES
rgblight_mode(RGB_MATRIX_MULTISPLASH);
#else
rgblight_mode(RGB_MATRIX_RAINBOW_MOVING_CHEVRON);
#endif
input_mode = 2;
}
#else
void matrix_init_keymap(void) {
input_mode = 2;
}
#endif //RGB_MATRIX_INIT

View File

@ -0,0 +1 @@
Note: This board will not flash if the "g_rgb_leds" const is not set to weak in the ergodox_ez.c file

View File

@ -0,0 +1,11 @@
#pragma once
#include "../drashna/config.h"
#undef PRODUCT
#define PRODUCT DrashnaDox - Hacked ErgoDox EZ Glow
#undef DEBOUNCE
#define DEBOUNCE 5
// #define RGB_MATRIX_KEYPRESSES // reacts to keypresses (will slow down matrix scan by a lot)

View File

@ -0,0 +1,67 @@
/* placeholder file */
#include QMK_KEYBOARD_H
const rgb_led g_rgb_leds[DRIVER_LED_TOTAL] = {
/*{row | col << 4}
| {x=0..224, y=0..64}
| | modifier
| | | */
{{0|(0<<4)}, {24.9*5, 16*0}, 0}, // LED 1 on right
{{0|(1<<4)}, {24.9*6, 16*0}, 0}, // LED 2
{{0|(2<<4)}, {24.9*7, 16*0}, 0}, // LED 3
{{0|(3<<4)}, {24.9*8, 16*0}, 0}, // LED 4
{{0|(4<<4)}, {24.9*9, 16*0}, 0}, // LED 5
{{1|(5<<4)}, {24.9*5, 16*1}, 0}, // LED 6
{{1|(6<<4)}, {24.9*6, 16*1}, 0}, // LED 7
{{1|(7<<4)}, {24.9*7, 16*1}, 0}, // LED 8
{{1|(8<<4)}, {24.9*8, 16*1}, 0}, // LED 9
{{1|(9<<4)}, {24.9*9, 16*1}, 0}, // LED 10
{{2|(5<<4)}, {24.9*5, 16*2}, 0}, // LED 11
{{2|(6<<4)}, {24.9*6, 16*2}, 0}, // LED 12
{{2|(7<<4)}, {24.9*7, 16*2}, 0}, // LED 13
{{2|(8<<4)}, {24.9*8, 16*2}, 0}, // LED 14
{{2|(9<<4)}, {24.9*9, 16*2}, 0}, // LED 15
{{3|(5<<4)}, {24.9*5, 16*2}, 0}, // LED 16
{{3|(6<<4)}, {24.9*6, 16*2}, 0}, // LED 17
{{3|(7<<4)}, {24.9*7, 16*2}, 0}, // LED 18
{{3|(8<<4)}, {24.9*8, 16*2}, 0}, // LED 19
{{3|(9<<4)}, {24.9*9, 16*2}, 0}, // LED 20
{{4|(6<<4)}, {24.9*6, 16*2}, 1}, // LED 21
{{4|(7<<4)}, {24.9*7, 16*2}, 1}, // LED 22
{{4|(8<<4)}, {24.9*8, 16*2}, 1}, // LED 23
{{4|(9<<4)}, {24.9*9, 16*2}, 1}, // LED 24
{{0|(0<<4)}, {24.9*4, 16*0}, 0}, // LED 1 on left
{{0|(1<<4)}, {24.9*3, 16*0}, 0}, // LED 2
{{0|(2<<4)}, {24.9*2, 16*0}, 0}, // LED 3
{{0|(3<<4)}, {24.9*1, 16*0}, 0}, // LED 4
{{0|(4<<4)}, {24.9*0, 16*0}, 0}, // LED 5
{{1|(5<<4)}, {24.9*4, 16*1}, 0}, // LED 6
{{1|(6<<4)}, {24.9*3, 16*1}, 0}, // LED 7
{{1|(7<<4)}, {24.9*2, 16*1}, 0}, // LED 8
{{1|(8<<4)}, {24.9*1, 16*1}, 0}, // LED 9
{{1|(9<<4)}, {24.9*0, 16*1}, 0}, // LED 10
{{2|(5<<4)}, {24.9*4, 16*2}, 0}, // LED 11
{{2|(6<<4)}, {24.9*3, 16*2}, 0}, // LED 12
{{2|(7<<4)}, {24.9*2, 16*2}, 0}, // LED 13
{{2|(8<<4)}, {24.9*1, 16*2}, 0}, // LED 14
{{2|(9<<4)}, {24.9*0, 16*2}, 0}, // LED 15
{{3|(5<<4)}, {24.9*4, 16*2}, 0}, // LED 16
{{3|(6<<4)}, {24.9*3, 16*2}, 0}, // LED 17
{{3|(7<<4)}, {24.9*2, 16*2}, 0}, // LED 18
{{3|(8<<4)}, {24.9*1, 16*2}, 0}, // LED 19
{{3|(9<<4)}, {24.9*0, 16*2}, 0}, // LED 20
{{4|(6<<4)}, {24.9*3, 16*2}, 1}, // LED 21
{{4|(7<<4)}, {24.9*2, 16*2}, 1}, // LED 22
{{4|(8<<4)}, {24.9*1, 16*2}, 1}, // LED 23
{{4|(9<<4)}, {24.9*0, 16*2}, 1}, // LED 24
};

View File

@ -0,0 +1,9 @@
USER_NAME := drashna
SRC += ../drashna/keymap.c
-include $$(LAYOUT_KEYMAP_PATH)/../drashna/rules.mk
ifneq (,$(findstring ergodox_ez,$(KEYBOARD)))
RGBLIGHT_ENABLE = no
RGB_MATRIX_ENABLE = yes
endif

View File

@ -92,7 +92,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_ADJUST] = LAYOUT_ortho_4x12_wrapper(
KC_MAKE, _________________ADJUST_L1_________________, _________________ADJUST_R1_________________, KC_RST,
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EPRM,
VRSN, _________________ADJUST_L2_________________, _________________ADJUST_R2_________________, EEP_RST,
_______, _________________ADJUST_L3_________________, _________________ADJUST_R3_________________, TG_MODS,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______
)

View File

@ -57,8 +57,10 @@
#ifdef TAPPING_TERM
#undef TAPPING_TERM
#endif // TAPPING_TERM
#ifdef KEYBOARD_ergodox_ez
#if defined(KEYBOARD_ergodox_ez)
#define TAPPING_TERM 185
#elif defined(KEYBOARD_crkbd)
#define TAPPING_TERM 200
#else
#define TAPPING_TERM 175
#endif

View File

@ -173,12 +173,15 @@ void matrix_init_user(void) {
get_unicode_input_mode();
#endif //UNICODE_ENABLE
matrix_init_keymap();
}
void startup_user (void) {
#ifdef RGBLIGHT_ENABLE
matrix_init_rgb();
#endif //RGBLIGHT_ENABLE
}
void startup_user (void) {
// #ifdef RGBLIGHT_ENABLE
// matrix_init_rgb();
// #endif //RGBLIGHT_ENABLE
startup_keymap();
}
@ -294,11 +297,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
}
break;
case EPRM: // Resets EEPROM
if (record->event.pressed) {
eeconfig_init();
}
break;
case VRSN: // Prints firmware version
if (record->event.pressed) {
send_string_with_delay_P(PSTR(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION ", Built on: " QMK_BUILDDATE), MACRO_TIMER);
@ -392,7 +390,7 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
#endif
}
return process_record_keymap(keycode, record) &&
#ifdef RGBLIGHT_ENABLE
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
process_record_user_rgb(keycode, record) &&
#endif // RGBLIGHT_ENABLE
process_record_secrets(keycode, record);
@ -413,7 +411,11 @@ uint32_t layer_state_set_user(uint32_t state) {
uint32_t default_layer_state_set_user(uint32_t state) {
return default_layer_state_set_keymap(state);
state = default_layer_state_set_keymap(state);
#ifdef RGBLIGHT_ENABLE
state = default_layer_state_set_rgb(state);
#endif // RGBLIGHT_ENABLE
return state;
}

View File

@ -73,6 +73,8 @@ typedef union {
};
} userspace_config_t;
extern userspace_config_t userspace_config;
#if defined(KEYMAP_SAFE_RANGE)
#define PLACEHOLDER_SAFE_RANGE KEYMAP_SAFE_RANGE
#else
@ -80,8 +82,7 @@ typedef union {
#endif
enum userspace_custom_keycodes {
EPRM = PLACEHOLDER_SAFE_RANGE, // Resets EEPROM do defaults (as in eeconfig_init)
VRSN, // Prints QMK Firmware and board info
VRSN = PLACEHOLDER_SAFE_RANGE, // Prints QMK Firmware and board info
KC_QWERTY, // Sets default layer to QWERTY
KC_COLEMAK, // Sets default layer to COLEMAK
KC_DVORAK, // Sets default layer to DVORAK
@ -159,6 +160,9 @@ enum userspace_custom_keycodes {
#define OS_RCTL OSM(MOD_RCTL)
#define OS_LALT OSM(MOD_LALT)
#define OS_RALT OSM(MOD_RALT)
#define OS_MEH OSM(MOD_MEH)
#define OS_HYPR OSM(MOD_HYPR)
#define ALT_APP ALT_T(KC_APP)
#define MG_NKRO MAGIC_TOGGLE_NKRO

View File

@ -2,8 +2,11 @@
#include "rgb_stuff.h"
#include "eeprom.h"
#if defined(RGBLIGHT_ENABLE)
extern rgblight_config_t rgblight_config;
extern userspace_config_t userspace_config;
#elif defined(RGB_MATRIX_ENABLE)
extern rgb_config_t rgb_matrix_config;
#endif
#ifdef RGBLIGHT_ENABLE
void rgblight_sethsv_default_helper(uint8_t index) {
@ -209,7 +212,7 @@ bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
return true; break;
#endif // RGBLIGHT_TWINKLE
case KC_RGB_T: // This allows me to use underglow as layer indication, or as normal
#ifdef RGBLIGHT_ENABLE
#if defined(RGBLIGHT_ENABLE) || defined(RGB_MATRIX_ENABLE)
if (record->event.pressed) {
userspace_config.rgb_layer_change ^= 1;
xprintf("rgblight layer change [EEPROM]: %u\n", userspace_config.rgb_layer_change);
@ -239,21 +242,22 @@ bool process_record_user_rgb(uint16_t keycode, keyrecord_t *record) {
void matrix_init_rgb(void) {
if (userspace_config.rgb_layer_change) {
rgblight_init();
rgblight_enable_noeeprom();
switch (biton32(eeconfig_read_default_layer())) {
case _COLEMAK:
rgblight_sethsv_noeeprom_magenta(); break;
case _DVORAK:
rgblight_sethsv_noeeprom_springgreen(); break;
case _WORKMAN:
rgblight_sethsv_noeeprom_goldenrod(); break;
default:
rgblight_sethsv_noeeprom_cyan(); break;
}
rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT);
}
// #ifdef RGBLIGHT_ENABLE
// if (userspace_config.rgb_layer_change) {
// rgblight_enable_noeeprom();
// switch (biton32(eeconfig_read_default_layer())) {
// case _COLEMAK:
// rgblight_sethsv_noeeprom_magenta(); break;
// case _DVORAK:
// rgblight_sethsv_noeeprom_springgreen(); break;
// case _WORKMAN:
// rgblight_sethsv_noeeprom_goldenrod(); break;
// default:
// rgblight_sethsv_noeeprom_cyan(); break;
// }
// rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT);
// }
// #endif
}
void matrix_scan_rgb(void) {
@ -270,7 +274,6 @@ void matrix_scan_rgb(void) {
uint32_t layer_state_set_rgb(uint32_t state) {
#ifdef RGBLIGHT_ENABLE
static bool has_ran;
if (userspace_config.rgb_layer_change) {
switch (biton32(state)) {
case _MACROS:
@ -312,12 +315,7 @@ uint32_t layer_state_set_rgb(uint32_t state) {
default:
rgblight_sethsv_noeeprom_cyan(); break;
}
if (has_ran) {
biton32(state) == _MODS ? rgblight_mode(RGBLIGHT_MODE_BREATHING) : rgblight_mode(RGBLIGHT_MODE_STATIC_LIGHT); // if _MODS layer is on, then breath to denote it
} else {
biton32(state) == _MODS ? rgblight_mode_noeeprom(RGBLIGHT_MODE_BREATHING) : rgblight_mode_noeeprom(RGBLIGHT_MODE_STATIC_LIGHT); // if _MODS layer is on, then breath to denote it
has_ran = true;
}
break;
}
// layer_state_set_indicator(); // Runs every scan, so need to call this here .... since I can't get it working "right" anyhow
@ -326,3 +324,39 @@ uint32_t layer_state_set_rgb(uint32_t state) {
return state;
}
uint32_t default_layer_state_set_rgb(uint32_t state) {
#ifdef RGBLIGHT_ENABLE
if (userspace_config.rgb_layer_change) {
rgblight_config_t temp_rgblight_config = rgblight_config;
switch (biton32(state)) {
case _COLEMAK:
temp_rgblight_config.hue = 300;
temp_rgblight_config.val = 255;
temp_rgblight_config.sat = 255;
temp_rgblight_config.mode = 1;
break;
case _DVORAK:
temp_rgblight_config.hue = 150;
temp_rgblight_config.val = 255;
temp_rgblight_config.sat = 255;
temp_rgblight_config.mode = 1;
case _WORKMAN:
temp_rgblight_config.hue = 43;
temp_rgblight_config.val = 218;
temp_rgblight_config.sat = 218;
temp_rgblight_config.mode = 1;
default:
temp_rgblight_config.hue = 180;
temp_rgblight_config.val = 255;
temp_rgblight_config.sat = 255;
temp_rgblight_config.mode = 1;
}
if (temp_rgblight_config.raw != eeconfig_read_rgblight()) {
xprintf("rgblight set default layer hsv [EEPROM]: %u,%u,%u,%u\n", temp_rgblight_config.hue, temp_rgblight_config.sat, temp_rgblight_config.val, temp_rgblight_config.mode);
eeconfig_update_rgblight(temp_rgblight_config.raw);
}
}
#endif // RGBLIGHT_ENABLE
return state;
}

View File

@ -12,4 +12,4 @@ void scan_rgblight_fadeout(void);
void matrix_init_rgb(void);
void matrix_scan_rgb(void);
uint32_t layer_state_set_rgb(uint32_t state);
uint32_t default_layer_state_set_rgb(uint32_t state);

View File

@ -27,6 +27,11 @@ ifeq ($(strip $(RGBLIGHT_ENABLE)), yes)
endif
endif
ifeq ($(strip $(RGB_MATRIX_ENABLE)), yes)
SRC += rgb_stuff.c
endif
ifeq ($(strip $(MACROS_ENABLED)), yes)
OPT_DEFS += -DMACROS_ENABLED
endif
@ -37,3 +42,15 @@ ifdef CONSOLE_ENABLE
endif
endif
ifeq ($(strip $(UCIS_ENABLE)), yes)
SRC += send_unicode.c
endif
ifeq ($(strip $(UNICODEMAP_ENABLE)), yes)
SRC += send_unicode.c
endif
ifeq ($(strip $(UNICODE_ENABLE)), yes)
SRC += send_unicode.c
endif

View File

@ -56,3 +56,57 @@ void send_unicode_hex_string(const char* str) {
// If you need a good converter: https://r12a.github.io/app-conversion/
uint8_t saved_mods;
void unicode_input_start (void) {
// save current mods
saved_mods = get_mods(); // Save current mods
clear_mods(); // Unregister mods to start from a clean state
switch(get_unicode_input_mode()) {
case UC_OSX:
register_code(KC_LALT);
break;
case UC_OSX_RALT:
register_code(KC_RALT);
break;
case UC_LNX:
register_code(KC_LCTL);
register_code(KC_LSFT);
register_code(KC_U);
unregister_code(KC_U);
unregister_code(KC_LSFT);
unregister_code(KC_LCTL);
break;
case UC_WIN:
register_code(KC_LALT);
register_code(KC_PPLS);
unregister_code(KC_PPLS);
break;
case UC_WINC:
register_code(KC_RALT);
unregister_code(KC_RALT);
register_code(KC_U);
unregister_code(KC_U);
break;
}
wait_ms(UNICODE_TYPE_DELAY);
}
void unicode_input_finish (void) {
switch(get_unicode_input_mode()) {
case UC_OSX:
case UC_WIN:
unregister_code(KC_LALT);
break;
case UC_OSX_RALT:
unregister_code(KC_RALT);
break;
case UC_LNX:
register_code(KC_SPC);
unregister_code(KC_SPC);
break;
}
set_mods(saved_mods); // Reregister previously set mods
}

View File

@ -50,12 +50,6 @@ bool process_record_user(uint16_t keycode, keyrecord_t *record) {
return false;
break;
case EPRM:
if (record->event.pressed) {
eeconfig_init();
}
return false;
break;
case VRSN:
if (record->event.pressed) {
SEND_STRING(QMK_KEYBOARD "/" QMK_KEYMAP " @ " QMK_VERSION);
@ -128,4 +122,3 @@ void shutdown_keymap(void) {}
void shutdown_user (void) {
shutdown_keymap();
}

View File

@ -9,9 +9,7 @@
#define BASE 0
enum custom_keycodes {
PLACEHOLDER = SAFE_RANGE, // can always be here
EPRM,
VRSN,
VRSN = SAFE_RANGE, // can always be here
KC_MAKE,
KC_RESET,
NEWPLACEHOLDER //use "NEWPLACEHOLDER for keymap specific codes