Merge remote-tracking branch 'upstream/master'
nstickney
commit
eab0166f83
|
|
@ -0,0 +1,83 @@
|
|||
#include "clueboard.h"
|
||||
|
||||
// Helpful defines
|
||||
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _CL 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
|
||||
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _CL: Control layer
|
||||
*/
|
||||
[_CL] = KEYMAP(
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
|
||||
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
|
||||
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
|
||||
};
|
||||
|
||||
/* This is a list of user defined functions. F(N) corresponds to item N
|
||||
of this list.
|
||||
*/
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(0), // Calls action_function()
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t mods_pressed;
|
||||
|
||||
switch (id) {
|
||||
case 0:
|
||||
/* Handle the combined Grave/Esc key
|
||||
*/
|
||||
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
|
||||
|
||||
if (record->event.pressed) {
|
||||
/* The key is being pressed.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
/* The key is being released.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 110 KiB |
|
|
@ -0,0 +1,15 @@
|
|||
```
|
||||
___ _____ _ _ _ __ __ _ __
|
||||
|__ \ / ____| | | | | | / / / /(_) / /
|
||||
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|
||||
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|
||||
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
|
||||
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
|
||||
```
|
||||
|
||||
|
||||
|
||||
# Caps Fn Layout
|
||||
|
||||
This is the default layout except that Caps Lock acts like Caps Lock when
|
||||
tapped but Fn when held.
|
||||
|
|
@ -1,7 +1,8 @@
|
|||
#include "clueboard.h"
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
// Helpful defines
|
||||
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
|
|
@ -9,21 +10,10 @@
|
|||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _RS 2
|
||||
#define _CL 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
|
|
@ -33,61 +23,44 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | |PGUP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL|HOME|PGDN| END|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_HOME, KC_PGDN, KC_END),
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
|
||||
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _RS: Reset layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | | | | | | | | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | |RESET| | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL| | | |
|
||||
* `----------------------------------------------------------------------------------'
|
||||
/* Keymap _CL: Control layer
|
||||
*/
|
||||
[_RS] = KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI),
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
SHIFT_ESC,
|
||||
[_CL] = KEYMAP(
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
|
||||
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
|
||||
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
|
||||
};
|
||||
|
||||
/* This is a list of user defined functions. F(N) corresponds to item N
|
||||
of this list.
|
||||
*/
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(SHIFT_ESC),
|
||||
[0] = ACTION_FUNCTION(0), // Calls action_function()
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t shift_esc_shift_mask;
|
||||
static uint8_t mods_pressed;
|
||||
|
||||
switch (id) {
|
||||
case SHIFT_ESC:
|
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||
case 0:
|
||||
/* Handle the combined Grave/Esc key
|
||||
*/
|
||||
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
|
||||
|
||||
if (record->event.pressed) {
|
||||
if (shift_esc_shift_mask) {
|
||||
/* The key is being pressed.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
|
|
@ -95,7 +68,9 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
|||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
if (shift_esc_shift_mask) {
|
||||
/* The key is being released.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
|
|
|
|||
Binary file not shown.
|
After Width: | Height: | Size: 110 KiB |
|
|
@ -0,0 +1,17 @@
|
|||
```
|
||||
___ _____ _ _ _ __ __ _ __
|
||||
|__ \ / ____| | | | | | / / / /(_) / /
|
||||
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|
||||
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|
||||
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
|
||||
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
|
||||
```
|
||||
|
||||
|
||||
|
||||
# Default Clueboard Layout
|
||||
|
||||
This is the default layout that comes flashed on every Clueboard. For the most
|
||||
part it's a straightforward and easy to follow layout. The only unusual key is
|
||||
the key in the upper left, which sends Escape normally, but Grave when any of
|
||||
the Ctrl, Alt, or GUI modifiers are held down.
|
||||
|
|
@ -0,0 +1,83 @@
|
|||
#include "clueboard.h"
|
||||
|
||||
// Helpful defines
|
||||
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _CL 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
|
||||
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _CL: Control layer
|
||||
*/
|
||||
[_CL] = KEYMAP(
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
|
||||
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
|
||||
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
|
||||
};
|
||||
|
||||
/* This is a list of user defined functions. F(N) corresponds to item N
|
||||
of this list.
|
||||
*/
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(0), // Calls action_function()
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t mods_pressed;
|
||||
|
||||
switch (id) {
|
||||
case 0:
|
||||
/* Handle the combined Grave/Esc key
|
||||
*/
|
||||
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
|
||||
|
||||
if (record->event.pressed) {
|
||||
/* The key is being pressed.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
/* The key is being released.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 105 KiB |
|
|
@ -0,0 +1,15 @@
|
|||
```
|
||||
___ _____ _ _ _ __ __ _ __
|
||||
|__ \ / ____| | | | | | / / / /(_) / /
|
||||
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|
||||
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|
||||
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
|
||||
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
|
||||
```
|
||||
|
||||
|
||||
|
||||
# Default Clueboard Layout for Mac
|
||||
|
||||
This is the default Clueboard layout with Alt and GUI switched to match Mac
|
||||
conventions.
|
||||
|
|
@ -1,49 +0,0 @@
|
|||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the makefile.mk in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -1,85 +0,0 @@
|
|||
#include "clueboard.h"
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _RS 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | Esc| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| ~| BS| |PgUp|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PgDn|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| Up|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | Ctrl| Alt| Gui| MHen| Space| Space| Hen| Gui| Alt| Ctrl|Left|Down|Rght|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \
|
||||
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | |PGUP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL|HOME|PGDN| END|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS, KC_DEL, BL_STEP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_SLCK, KC_PAUS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), KC_PGUP, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _RS: Reset/Underlight layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | | | | | | | | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | |RESET| | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL| | | |
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_RS] = KEYMAP(
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_TOG, RGB_VAI, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_VAD, \
|
||||
KC_TRNS, KC_TRNS, MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, \
|
||||
MO(_FL), KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, MO(_FL), RGB_SAI, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS, RGB_MOD, RGB_MOD, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, RGB_HUD, RGB_SAD, RGB_HUI),
|
||||
};
|
||||
|
||||
/*enum function_id {
|
||||
};*/
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
switch (id) {
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,47 @@
|
|||
#include "clueboard.h"
|
||||
|
||||
// Helpful defines
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _CL 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
MO(_FL), KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, MO(_FL), KC_UP, \
|
||||
KC_LCTL, KC_LALT, KC_LGUI,KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RGUI, KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), KC_PGUP, \
|
||||
_______, _______, _______,_______, _______,_______, _______, _______, _______, _______, KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _CL: Reset/Underlight layer
|
||||
*/
|
||||
[_CL] = KEYMAP(
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
|
||||
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
|
||||
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
};
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 109 KiB |
|
|
@ -0,0 +1,14 @@
|
|||
```
|
||||
___ _____ _ _ _ __ __ _ __
|
||||
|__ \ / ____| | | | | | / / / /(_) / /
|
||||
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|
||||
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|
||||
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
|
||||
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
|
||||
```
|
||||
|
||||
|
||||
|
||||
# Maximised Clueboard Layout
|
||||
|
||||
This layout is intended for a board with one or both shifts split. The outside key on the split shift is an Fn, while the inside is shift. The bottom row has all the mods on both sides, optimised for a Mac.
|
||||
|
|
@ -0,0 +1 @@
|
|||
MOUSEKEY_ENABLE = yes
|
||||
|
|
@ -0,0 +1,93 @@
|
|||
#include "clueboard.h"
|
||||
|
||||
// Helpful defines
|
||||
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _CL 2
|
||||
#define _ML 3
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
|
||||
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _CL: Control layer
|
||||
*/
|
||||
[_CL] = KEYMAP(
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
|
||||
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
|
||||
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
|
||||
|
||||
/* Keymap _ML: Mouse layer
|
||||
*/
|
||||
[_ML] = KEYMAP(
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, _______, \
|
||||
_______, _______, KC_BTN3,KC_BTN2,KC_BTN1,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_MS_U, \
|
||||
_______, _______, _______,_______, LT(_ML, KC_SPC),LT(_ML, KC_SPC), _______, KC_BTN1, KC_BTN2, KC_BTN3, KC_MS_L, KC_MS_D,KC_MS_R),
|
||||
};
|
||||
|
||||
/* This is a list of user defined functions. F(N) corresponds to item N
|
||||
of this list.
|
||||
*/
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(0), // Calls action_function()
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t mods_pressed;
|
||||
|
||||
switch (id) {
|
||||
case 0:
|
||||
/* Handle the combined Grave/Esc key
|
||||
*/
|
||||
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
|
||||
|
||||
if (record->event.pressed) {
|
||||
/* The key is being pressed.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
/* The key is being released.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 140 KiB |
|
|
@ -0,0 +1,16 @@
|
|||
```
|
||||
___ _____ _ _ _ __ __ _ __
|
||||
|__ \ / ____| | | | | | / / / /(_) / /
|
||||
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|
||||
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|
||||
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
|
||||
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
|
||||
```
|
||||
|
||||
|
||||
|
||||
# MouseKeys Layout
|
||||
|
||||
This layout adds a mouse layer. When you hold down the spacebar the arrow keys
|
||||
will move your mouse cursor. You can click using the 3 mods to the left of the
|
||||
arrow keys, or the 3 keys under your primary fingers on the home row.
|
||||
|
|
@ -0,0 +1,83 @@
|
|||
#include "clueboard.h"
|
||||
|
||||
// Helpful defines
|
||||
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _CL 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
S(KC_GRV), KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_GRV), KC_DEL, BL_STEP, \
|
||||
S(KC_TAB), S(KC_Q), S(KC_W),S(KC_E),S(KC_R),S(KC_T), S(KC_Y), S(KC_U),S(KC_I),S(KC_O), S(KC_P), S(KC_LBRC),S(KC_RBRC),S(KC_BSLS), S(KC_PGDN), \
|
||||
S(KC_LCTL),S(KC_A), MO(_CL),S(KC_D),S(KC_F),S(KC_G), S(KC_H), S(KC_J),S(KC_K),S(KC_L), S(KC_SCLN),S(KC_QUOT),S(KC_NUHS),S(KC_ENT), \
|
||||
MO(_FL), S(KC_NUBS),S(KC_Z),S(KC_X),S(KC_C),S(KC_V), S(KC_B), S(KC_N),S(KC_M),S(KC_COMM),S(KC_DOT), S(KC_SLSH),S(KC_RO), KC_RSFT, KC_PGUP, \
|
||||
KC_LCTL, KC_LALT, KC_LGUI,MO(_FL), S(KC_SPC),S(KC_SPC), MO(_FL), KC_RGUI, KC_RALT, KC_RCTL, KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _CL: Control layer
|
||||
*/
|
||||
[_CL] = KEYMAP(
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
|
||||
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
|
||||
_______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD,RGB_SAD,RGB_HUI),
|
||||
};
|
||||
|
||||
/* This is a list of user defined functions. F(N) corresponds to item N
|
||||
of this list.
|
||||
*/
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(0), // Calls action_function()
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t mods_pressed;
|
||||
|
||||
switch (id) {
|
||||
case 0:
|
||||
/* Handle the combined Grave/Esc key
|
||||
*/
|
||||
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
|
||||
|
||||
if (record->event.pressed) {
|
||||
/* The key is being pressed.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
/* The key is being released.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 105 KiB |
|
|
@ -0,0 +1,17 @@
|
|||
```
|
||||
___ _____ _ _ _ __ __ _ __
|
||||
|__ \ / ____| | | | | | / / / /(_) / /
|
||||
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|
||||
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|
||||
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
|
||||
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
|
||||
```
|
||||
|
||||
|
||||
|
||||
# Shift Fn Clueboard Layout
|
||||
|
||||
This is an experimental layout. It makes the left shift key a dual roll key.
|
||||
For most keys it acts as a shift key, but for some keys it activates an
|
||||
alternate function instead. Primarily I use this to access the F-keys under
|
||||
the number rows.
|
||||
|
|
@ -1,7 +1,8 @@
|
|||
#include "clueboard.h"
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
// Helpful defines
|
||||
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
|
|
@ -9,21 +10,10 @@
|
|||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _RS 2
|
||||
#define _CL 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: (Base Layer) Default Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* |Esc~| 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| =| \| BS| |PGUP|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | Tab| Q| W| E| R| T| Y| U| I| O| P| [| ]| \| |PGDN|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* |Capslck| A| S| D| F| G| H| J| K| L| ;| '| # | Ent|
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* |Shift| BS| Z| X| C| V| B| N| M| ,| .| /| BS|Shift| UP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | Ctrl| Gui| Alt| MHen| Space| Space| Hen| Alt| Ctrl| _FL|LEFT|DOWN|RGHT|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
|
|
@ -33,61 +23,41 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
KC_LCTL,KC_LALT,KC_LGUI,MO(_FL), KC_SPC, KC_SPC, MO(_FL), KC_RGUI, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | `| F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12| | Del| |BLIN|
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | | | | | |PScr|SLck|Paus| | | | |BLDE|
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | |PGUP|
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL|HOME|PGDN| END|
|
||||
* `----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,KC_DEL, BL_STEP, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PSCR,KC_SLCK,KC_PAUS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_PGUP, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL), KC_TRNS,KC_TRNS, MO(_FL),KC_TRNS,KC_TRNS,MO(_FL),KC_HOME,KC_PGDN,KC_END),
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______,KC_DEL, BL_STEP, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK,KC_PAUS,_______,_______,_______, _______, \
|
||||
_______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, KC_PGUP, \
|
||||
_______,_______,_______,MO(_FL), _______,_______, MO(_FL),_______,_______,MO(_FL),KC_HOME,KC_PGDN,KC_END),
|
||||
|
||||
/* Keymap _RS: Reset layer
|
||||
* ,--------------------------------------------------------------------------. ,----.
|
||||
* | | | | | | | | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| |----|
|
||||
* | | | | |RESET| | | | | | | | | | | |
|
||||
* |--------------------------------------------------------------------------| `----'
|
||||
* | | | _RS| | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |------------------------------------------------------------------------|----|----.
|
||||
* | | | | | | | | | | _FL| | | |
|
||||
* `----------------------------------------------------------------------------------'
|
||||
/* Keymap _CL: Control layer
|
||||
*/
|
||||
[_RS] = KEYMAP(
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,RESET, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,MO(_RS),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,MO(_FL),KC_TRNS, KC_TRNS, KC_TRNS),
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
SHIFT_ESC,
|
||||
[_CL] = KEYMAP(
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
|
||||
_______,_______,_______,_______,RESET, _______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
|
||||
_______,_______,MO(_CL),_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
|
||||
_______,_______,_______,_______, _______,_______, _______,_______,_______,MO(_FL),_______, _______, _______),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(SHIFT_ESC),
|
||||
[0] = ACTION_FUNCTION(0),
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t shift_esc_shift_mask;
|
||||
static uint8_t mods_pressed;
|
||||
|
||||
switch (id) {
|
||||
case SHIFT_ESC:
|
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||
case 0:
|
||||
/* Handle the combined Grave/Esc key
|
||||
*/
|
||||
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
|
||||
|
||||
if (record->event.pressed) {
|
||||
if (shift_esc_shift_mask) {
|
||||
/* The key is being pressed.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
|
|
@ -95,7 +65,9 @@ void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
|||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
if (shift_esc_shift_mask) {
|
||||
/* The key is being released.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
|
|
|
|||
Binary file not shown.
|
After Width: | Height: | Size: 109 KiB |
|
|
@ -1,3 +1,14 @@
|
|||
```
|
||||
___ _____ _ _ _ __ __ _ __
|
||||
|__ \ / ____| | | | | | / / / /(_) / /
|
||||
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|
||||
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|
||||
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
|
||||
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
|
||||
```
|
||||
|
||||
|
||||
|
||||
# skullY's Clueboard Layout
|
||||
|
||||
This layout is what I (@skullydazed) use on my personal Clueboards. I mostly use it for programming, CAD, and general typing.
|
||||
|
|
|
|||
|
|
@ -0,0 +1,83 @@
|
|||
#include "clueboard.h"
|
||||
|
||||
// Helpful defines
|
||||
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _CL 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_PGUP, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_PGDN, \
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC, KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, KC_INS, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, KC_DEL, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
|
||||
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _CL: Control layer
|
||||
*/
|
||||
[_CL] = KEYMAP(
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
|
||||
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
|
||||
_______, _______, _______,_______, RGB_MOD,RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD,RGB_HUI),
|
||||
};
|
||||
|
||||
/* This is a list of user defined functions. F(N) corresponds to item N
|
||||
of this list.
|
||||
*/
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(0), // Calls action_function()
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t mods_pressed;
|
||||
|
||||
switch (id) {
|
||||
case 0:
|
||||
/* Handle the combined Grave/Esc key
|
||||
*/
|
||||
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
|
||||
|
||||
if (record->event.pressed) {
|
||||
/* The key is being pressed.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
/* The key is being released.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 109 KiB |
|
|
@ -0,0 +1,15 @@
|
|||
```
|
||||
___ _____ _ _ _ __ __ _ __
|
||||
|__ \ / ____| | | | | | / / / /(_) / /
|
||||
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|
||||
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|
||||
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
|
||||
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
|
||||
```
|
||||
|
||||
|
||||
|
||||
# Default Clueboard Layout
|
||||
|
||||
This is the default layout except that Caps Lock has been changed to Control
|
||||
and Insert and Delete have been put into the Fn layer.
|
||||
|
|
@ -0,0 +1,83 @@
|
|||
#include "clueboard.h"
|
||||
|
||||
// Helpful defines
|
||||
#define GRAVE_MODS (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT)|MOD_BIT(KC_LGUI)|MOD_BIT(KC_RGUI)|MOD_BIT(KC_LALT)|MOD_BIT(KC_RALT))
|
||||
#define _______ KC_TRNS
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _FL 1
|
||||
#define _CL 2
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap _BL: Base Layer (Default Layer)
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
F(0), KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_GRV, KC_BSPC, KC_INS, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_DEL, \
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_NUHS, KC_ENT, \
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RO, KC_RSFT, KC_UP, \
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_MHEN, KC_SPC,KC_SPC, KC_HENK, KC_RALT, KC_RCTL, MO(_FL), KC_LEFT, KC_DOWN, KC_RGHT),
|
||||
|
||||
/* Keymap _FL: Function Layer
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_GRV, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, _______, KC_DEL, BL_STEP, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,KC_PSCR,KC_SLCK, KC_PAUS, _______, _______, _______, _______, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, KC_PGUP, \
|
||||
_______, _______, _______, _______, _______,_______, _______, _______, _______, MO(_FL), KC_HOME, KC_PGDN, KC_END),
|
||||
|
||||
/* Keymap _CL: Control layer
|
||||
*/
|
||||
[_CL] = KEYMAP(
|
||||
_______, _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_TOG, RGB_VAI, \
|
||||
_______, _______, _______,_______,RESET, _______,_______,_______,_______,_______, _______, _______, _______, _______, RGB_VAD, \
|
||||
_______, _______, MO(_CL),_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, _______, \
|
||||
MO(_FL), _______, _______,_______,_______,_______,_______,_______,_______,_______, _______, _______, _______, MO(_FL), RGB_SAI, \
|
||||
_______, _______, _______,_______, RGB_MOD, RGB_MOD, _______, _______, _______, _______, RGB_HUD, RGB_SAD, RGB_HUI),
|
||||
};
|
||||
|
||||
/* This is a list of user defined functions. F(N) corresponds to item N
|
||||
of this list.
|
||||
*/
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(0), // Calls action_function()
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t mods_pressed;
|
||||
|
||||
switch (id) {
|
||||
case 0:
|
||||
/* Handle the combined Grave/Esc key
|
||||
*/
|
||||
mods_pressed = get_mods()&GRAVE_MODS; // Check to see what mods are pressed
|
||||
|
||||
if (record->event.pressed) {
|
||||
/* The key is being pressed.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
/* The key is being released.
|
||||
*/
|
||||
if (mods_pressed) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 108 KiB |
|
|
@ -0,0 +1,17 @@
|
|||
```
|
||||
___ _____ _ _ _ __ __ _ __
|
||||
|__ \ / ____| | | | | | / / / /(_) / /
|
||||
||) | | | | |_ _ ___| |__ ___ __ _ _ __ __| | / /_ / /_ / /
|
||||
|/ / | | | | | | |/ _ \ '_ \ / _ \ / _` | '__/ _` | | '_ \| '_ \ / /
|
||||
|_| | |____| | |_| | __/ |_) | (_) | (_| | | | (_| | | (_) | (_) / / _
|
||||
(_) \_____|_|\__,_|\___|_.__/ \___/ \__,_|_| \__,_| \___/ \___/_/ (_)
|
||||
```
|
||||
|
||||
|
||||
|
||||
# Default Clueboard Layout
|
||||
|
||||
This is the default layout that comes flashed on every Clueboard. For the most
|
||||
part it's a straightforward and easy to follow layout. The only unusual key is
|
||||
the key in the upper left, which sends Escape normally, but Grave when any of
|
||||
the Ctrl, Alt, or GUI modifiers are held down.
|
||||
|
|
@ -90,14 +90,14 @@ OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
|||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
BOOTMAGIC_ENABLE ?= no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= no # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
EXTRAKEY_ENABLE ?= no # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
AUDIO_ENABLE ?= no
|
||||
RGBLIGHT_ENABLE ?= no # Enable keyboard underlight functionality
|
||||
RGBLIGHT_ENABLE ?= yes # Enable keyboard underlight functionality
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
|
|
@ -0,0 +1 @@
|
|||
TAP_DANCE_ENABLE = no
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 294 KiB |
Binary file not shown.
|
After Width: | Height: | Size: 230 KiB |
|
|
@ -0,0 +1,256 @@
|
|||
#include "ergodox.h"
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/* Keymap 0: Basic layer
|
||||
* MEH: Alt+Control+Shift
|
||||
* HYPER: Alt+Control+Shift+Gui
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | ` ~ | 1 ! | 2 @ | 3 # | 4 $ | 5 % | 6 ^ | | 7 & | 8 * | 9 ( | 0 ) | - _ | = + | Backsp |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | TAB | Q | W | F | P | G |TG(3) | |TG(4) | J | L | U | Y | ; : | ' " |
|
||||
* |--------+------+------+------+------+------|F-lck | |N-lck |------+------+------+------+------+--------|
|
||||
* | CAPS | A | R | S | T | D |------| |------| H | N | E | I | O | ENT |
|
||||
* |--------+------+------+------+------+------| MEH | | MEH |------+------+------+------+------+--------|
|
||||
* | Shift | Z | X | C | V | B | | | | K | M | , < | . > | UP | Shift |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | LCTL | LCTL | LGUI | LALT | LGUI | | RALT | RCTL | LEFT | DOWN | RIGHT|
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,--------------. ,--------------.
|
||||
* | Esc | App | | Ins | Del |
|
||||
* ,------|------|-------| |------+-------+------.
|
||||
* | | | Home | | PgUp | | |
|
||||
* | MO(2)| MO(4)|-------| |------| Space |Space |
|
||||
* |symbol|N-Lock| End | | PgDn | | |
|
||||
* `---------------------' `---------------------'
|
||||
*/
|
||||
[0] = KEYMAP( // layer 0 : default
|
||||
// left hand
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6,
|
||||
KC_TAB, KC_Q, KC_W, KC_F, KC_P, KC_G, TG(3),
|
||||
KC_CAPS, KC_A, KC_R, KC_S, KC_T, KC_D,
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_MEH,
|
||||
KC_LCTL, KC_LCTL, KC_LGUI, KC_LALT, KC_LGUI,
|
||||
|
||||
KC_ESC, KC_APP,
|
||||
KC_HOME,
|
||||
MO(2), MO(4), KC_END,
|
||||
|
||||
// right hand
|
||||
KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC,
|
||||
TG(4), KC_J, KC_L, KC_U, KC_Y, KC_SCLN, KC_QUOT,
|
||||
KC_H, KC_N, KC_E, KC_I, KC_O, KC_ENT,
|
||||
KC_MEH, KC_K, KC_M, KC_COMM, KC_DOT, KC_UP, KC_RSFT,
|
||||
KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RIGHT,
|
||||
|
||||
KC_INS, KC_DEL,
|
||||
KC_PGUP,
|
||||
KC_PGDN, KC_SPC, KC_SPC
|
||||
),
|
||||
|
||||
/* Keymap 1: QWERTY layer (games)
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | Q | W | E | R | T | | | | Y | U | I | O | P | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | A | S | D | F | G |------| |------| H | J | K | L | ; | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | Z | X | C | V | B | | | | N | M | | | | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | | | | | | | | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------|------| |------+--------+------.
|
||||
* | | | | | | | |
|
||||
* | | |------| |------| | |
|
||||
* | | | | | | | |
|
||||
* `--------------------' `----------------------'
|
||||
*/
|
||||
[1] = KEYMAP( // layer 1: QWERTY layer (games)
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_TRNS,
|
||||
KC_TRNS, KC_A, KC_S, KC_D, KC_F, KC_G,
|
||||
KC_TRNS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
// right hand
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_TRNS,
|
||||
KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_TRNS,
|
||||
KC_TRNS, KC_N, KC_M, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
/* Keymap 2: Symbol Layer
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | | | + | < | % | # | DF(1)| | | & | [ | ] | \ | : | " |
|
||||
* |--------+------+------+------+------+------|QWERTY| | |------+------+------+------+------+--------|
|
||||
* | | ! | - | > | = | @ |------| |------| * | { | } | / | ? | |
|
||||
* |--------+------+------+------+------+------| DF(0)| | |------+------+------+------+------+--------|
|
||||
* | | NUBS | NUHS | / | $ | ^ |COLEMAK | | | | ( | ) | | | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | | | | | | | | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | | | | | |
|
||||
* | | |------| |------| | |
|
||||
* | | | | | | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// SYMBOLS
|
||||
[2] = KEYMAP(
|
||||
// left hand
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
|
||||
KC_TRNS, KC_PIPE, KC_PLUS, KC_LT, KC_PERC, KC_HASH, DF(1),
|
||||
KC_LBRC, KC_EXCLAIM, KC_MINUS, KC_GT, KC_EQUAL, KC_AT,
|
||||
KC_TRNS, KC_NUBS, KC_NUHS, KC_SLSH, KC_DOLLAR, KC_CIRC, DF(0),
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
// right hand
|
||||
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,
|
||||
KC_TRNS, KC_AMPERSAND, KC_LBRC, KC_RBRC, KC_BSLS, KC_COLN, KC_DQT,
|
||||
KC_ASTERISK, KC_LCBR, KC_RCBR, KC_SLSH, KC_QUES, KC_TRNS,
|
||||
KC_TRNS, KC_PIPE, KC_LPRN, KC_RPRN, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
/* Keymap 3:
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | | F1 | F2 | F3 | F4 | F5 | F6 | | F7 | F8 | F9 | F10 | F11 | F12 | |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | | | | | | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | |------| |------| | | | | | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | | HYPR | | HYPR | | | | | | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | | | | | | | | |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | | | | | |
|
||||
* | | |------ |------| | |
|
||||
* | | | | | | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
// F-keys
|
||||
[3] = KEYMAP(
|
||||
KC_TRNS, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HYPR,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
// right hand
|
||||
KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_HYPR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
/* Keymap 4: Numlock
|
||||
*
|
||||
* ,--------------------------------------------------. ,--------------------------------------------------.
|
||||
* | RESET | | | |P-SCRE|S-LOCK|PAUSE | |NLOCK | CALC | = | / | * | | |
|
||||
* |--------+------+------+------+------+-------------| |------+------+------+------+------+------+--------|
|
||||
* | | | | | | | | | | Vol+ | 7 | 8 | 9 | - | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | |------| |------| Vol- | 4 | 5 | 6 | + | |
|
||||
* |--------+------+------+------+------+------| | | |------+------+------+------+------+--------|
|
||||
* | | | | | | | HYPR | | HYPR | Mute | 1 | 2 | 3 |Enter | |
|
||||
* `--------+------+------+------+------+-------------' `-------------+------+------+------+------+--------'
|
||||
* | | | | | | | | 0 | . | RCTL | RCTL |
|
||||
* `----------------------------------' `----------------------------------'
|
||||
* ,-------------. ,-------------.
|
||||
* | | | | | |
|
||||
* ,------|------|------| |------+------+------.
|
||||
* | | | | | | | |
|
||||
* | | |------ |------| | |
|
||||
* | | | | | | | |
|
||||
* `--------------------' `--------------------'
|
||||
*/
|
||||
[4] = KEYMAP(
|
||||
RESET, KC_LSFT, KC_LSFT, KC_SYSREQ, KC_PSCR, KC_SLCK, KC_PAUSE,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_HYPR,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS,
|
||||
|
||||
// right hand
|
||||
KC_NLCK, KC_CALC, KC_PEQL, KC_PSLS, KC_PAST, KC_LSFT, KC_TRNS,
|
||||
KC_TRNS, KC_VOLU, KC_P7, KC_P8, KC_P9, KC_PMNS, KC_TRNS,
|
||||
KC_VOLD, KC_P4, KC_P5, KC_P6, KC_PPLS, KC_TRNS,
|
||||
KC_HYPR, KC_MUTE, KC_P1, KC_P2, KC_P3, KC_PENT, KC_TRNS,
|
||||
KC_TRNS, KC_P0, KC_PDOT, KC_RCTL, KC_RCTL,
|
||||
|
||||
KC_TRNS, KC_TRNS,
|
||||
KC_TRNS,
|
||||
KC_TRNS, KC_TRNS, KC_TRNS
|
||||
),
|
||||
|
||||
};
|
||||
|
||||
|
||||
// Runs constantly in the background, in a loop.
|
||||
void matrix_scan_user(void) {
|
||||
static uint8_t state;
|
||||
|
||||
ergodox_board_led_off();
|
||||
ergodox_right_led_1_off();
|
||||
ergodox_right_led_2_off();
|
||||
ergodox_right_led_3_off();
|
||||
|
||||
//reduce LED on time to 1/6th because LEDs are too strong
|
||||
if (++state < 6) return;
|
||||
state = 0;
|
||||
|
||||
//bit 1: default layer 1 - QWERTY
|
||||
if (default_layer_state & (1UL << 1)) ergodox_right_led_1_on();
|
||||
|
||||
uint8_t layer = biton32(layer_state);
|
||||
|
||||
//layer 2 : Symbols (& Fs)
|
||||
//if (layer == 2) ergodox_right_led_2_on();
|
||||
|
||||
//layer 3 : F-lock
|
||||
if (layer == 3) ergodox_right_led_2_on();
|
||||
|
||||
//layer 4 : Num-lock
|
||||
if (layer == 4) ergodox_right_led_3_on();
|
||||
};
|
||||
|
|
@ -0,0 +1,23 @@
|
|||
# ErgoDox EZ colemak_programmer
|
||||
|
||||
## Features
|
||||
|
||||
* Qwerty and colemak 2 in 1
|
||||
* Use DF() macro to swap the bottom layer so it behaves literally as collemak or qwerty
|
||||
* Graphical creator did not allow this so I had to use TO(0) and TO(1) on the picture
|
||||
* Symbol layer programmers friendly
|
||||
* Not only symbols are easy to access but common combination are easy too: ->, =>, !=, etc.
|
||||
* Windows and Mac
|
||||
* The extra repeated Win key is very handy on Mac
|
||||
* Numlock
|
||||
|
||||
I came to this layout after several iterations. It is not the ultimate best ergonomic layout but it is the best if you switch back and forth between ergodox and laptops.
|
||||
|
||||
## Notes
|
||||
* The Quote and Enter can be swapped
|
||||
* If you use sculpted key caps try turning the bottom key 180 degrees so it became very comfortable to type with thumb.
|
||||
|
||||
Alternatively view the [graphical creator version](http://configure.ergodox-ez.com/keyboard_layouts/kmevwm/edit) but beware it is not the same due to the creator limitations.
|
||||
|
||||
|
||||
|
||||
|
|
@ -0,0 +1,112 @@
|
|||
#----------------------------------------------------------------------------
|
||||
# On command line:
|
||||
#
|
||||
# make all = Make software.
|
||||
#
|
||||
# make clean = Clean out built project files.
|
||||
#
|
||||
# make coff = Convert ELF to AVR COFF.
|
||||
#
|
||||
# make extcoff = Convert ELF to AVR Extended COFF.
|
||||
#
|
||||
# make program = Download the hex file to the device.
|
||||
# Please customize your programmer settings(PROGRAM_CMD)
|
||||
#
|
||||
# make teensy = Download the hex file to the device, using teensy_loader_cli.
|
||||
# (must have teensy_loader_cli installed).
|
||||
#
|
||||
# make dfu = Download the hex file to the device, using dfu-programmer (must
|
||||
# have dfu-programmer installed).
|
||||
#
|
||||
# make flip = Download the hex file to the device, using Atmel FLIP (must
|
||||
# have Atmel FLIP installed).
|
||||
#
|
||||
# make dfu-ee = Download the eeprom file to the device, using dfu-programmer
|
||||
# (must have dfu-programmer installed).
|
||||
#
|
||||
# make flip-ee = Download the eeprom file to the device, using Atmel FLIP
|
||||
# (must have Atmel FLIP installed).
|
||||
#
|
||||
# make debug = Start either simulavr or avarice as specified for debugging,
|
||||
# with avr-gdb or avr-insight as the front end for debugging.
|
||||
#
|
||||
# make filename.s = Just compile filename.c into the assembler code only.
|
||||
#
|
||||
# make filename.i = Create a preprocessed source file for use in submitting
|
||||
# bug reports to the GCC project.
|
||||
#
|
||||
# To rebuild project do "make clean" then "make all".
|
||||
#----------------------------------------------------------------------------
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# comment out to disable the options.
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
# CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
# COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
KEYBOARD_LOCK_ENABLE ?= yes # Allow locking of keyboard via magic key
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
# SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
# BACKLIGHT_ENABLE ?= yes # Enable keyboard backlight functionality
|
||||
# MIDI_ENABLE ?= YES # MIDI controls
|
||||
# UNICODE_ENABLE ?= YES # Unicode
|
||||
# BLUETOOTH_ENABLE ?= yes # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE ?= yes # Enable RGB Underglow
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
Unxmaal's GH60 Layout
|
||||
=====================
|
||||
* Mostly stolen from /u/robotmaxtron
|
||||
|
||||
##Quantum MK Firmware
|
||||
For the full Quantum feature list, see the parent readme.md.
|
||||
|
||||
* Standard Mac ANSI layout
|
||||
* Spacebar acts as space when tapped, Fn when held
|
||||
* Menu acts as menu when tapped, Fn2 when held
|
||||
* Layer1:
|
||||
* Top row = `~, F1-F12, Del
|
||||
* JKIL = arrow cluster
|
||||
* Layer2:
|
||||
* Top row = media controls
|
||||
* JKIL = PgDn/Up/Home/Insert
|
||||
* Backspace = Reset
|
||||
|
||||
### Additional Credits
|
||||
Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.
|
||||
Binary file not shown.
|
After Width: | Height: | Size: 1015 KiB |
|
|
@ -0,0 +1,190 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEED
|
||||
#define PRODUCT_ID 0x6060
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER geekhack
|
||||
#define PRODUCT GH60
|
||||
#define DESCRIPTION t.m.k. keyboard firmware for GH60
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 5
|
||||
#define MATRIX_COLS 14
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { D0, D1, D2, D3, D5 }
|
||||
// Rev A
|
||||
// #define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B0, B5, B4, D7, D6, B3 }
|
||||
// Rev B/C
|
||||
#define MATRIX_COL_PINS { F0, F1, E6, C7, C6, B6, D4, B1, B7, B5, B4, D7, D6, B3 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
#define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
/*
|
||||
* RGB Underglow
|
||||
* These settings are for the F4 by default:
|
||||
*
|
||||
*
|
||||
* #define ws2812_PORTREG PORTF
|
||||
* #define ws2812_DDRREG DDRF
|
||||
* #define ws2812_pin PF4
|
||||
* #define RGBLED_NUM 14 // Number of LEDs
|
||||
* #define RGBLIGHT_HUE_STEP 10
|
||||
* #define RGBLIGHT_SAT_STEP 17
|
||||
* #define RGBLIGHT_VAL_STEP 17
|
||||
*
|
||||
* The firmware supports 5 different light effects, and the color (hue, saturation, brightness) can be customized in most effects.
|
||||
* To control the underglow, you need to modify your keymap file to assign those functions to some keys/key combinations.
|
||||
* For details, please check this keymap. keyboard/planck/keymaps/yang/keymap.c
|
||||
*/
|
||||
|
||||
/* Deprecated code below
|
||||
#define ws2812_PORTREG PORTF
|
||||
#define ws2812_DDRREG DDRF
|
||||
#define ws2812_pin PF4
|
||||
*/
|
||||
#define RGB_DI_PIN F4
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 8 // Number of LEDs
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
#endif
|
||||
|
|
@ -0,0 +1,228 @@
|
|||
#include "gh60.h"
|
||||
#include "action_layer.h"
|
||||
|
||||
#define _BL 0
|
||||
#define _AL 1
|
||||
#define _FL 2
|
||||
#define _UL 3
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/*
|
||||
* ANSI Base, Mac style
|
||||
* ,-----------------------------------------------------------------------------.
|
||||
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp |
|
||||
* |-----------------------------------------------------------------------------|
|
||||
* |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \|
|
||||
* |-----------------------------------------------------------------------------|
|
||||
* |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter |
|
||||
* |-----------------------------------------------------------------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
|
||||
* |-----------------------------------------------------------------------------|
|
||||
* |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl|
|
||||
* `-----------------------------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP(
|
||||
KC_ESC,KC_1,KC_2,KC_3,KC_4,KC_5,KC_6,KC_7,KC_8,KC_9,KC_0,KC_MINS,KC_EQL,KC_BSPC, \
|
||||
KC_TAB,KC_Q,KC_W,KC_E,KC_R,KC_T,KC_Y,KC_U,KC_I,KC_O,KC_P,KC_LBRC,KC_RBRC,KC_BSLS, \
|
||||
KC_LCTL,KC_A,KC_S,KC_D,KC_F,KC_G,KC_H,KC_J,KC_K,KC_L,KC_SCLN,KC_QUOT,KC_NO,KC_ENT, \
|
||||
KC_LSFT,KC_NO,KC_Z,KC_X,KC_C,KC_V,KC_B,KC_N,KC_M,KC_COMM,KC_DOT,KC_SLSH,KC_NO,KC_RSFT, \
|
||||
MO(1),KC_LALT,KC_LGUI, LT(1,KC_SPACE), KC_NO, KC_RGUI, KC_RALT, LT(2,KC_MENU), KC_RCTL),
|
||||
|
||||
/*
|
||||
* Pok3r style arrow cluster
|
||||
* ,-----------------------------------------------------------.
|
||||
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | |Up| | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | |Left|Down|Right| | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_AL] = KEYMAP(
|
||||
KC_GRV,KC_F1,KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
|
||||
|
||||
|
||||
/*
|
||||
* Secondary function layer
|
||||
* ,-------------------------------------------------------------.
|
||||
* | | | | | | | | RW|Play|FF| Mute| Vol Down | Vol up |Reset |
|
||||
* |-------------------------------------------------------------|
|
||||
* | | | | | | | | | |PgUp| | | | |
|
||||
* |-------------------------------------------------------------|
|
||||
* | | | | | | | |Home|PgDown|End| | | |
|
||||
* |-------------------------------------------------------------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |-------------------------------------------------------------|
|
||||
* | | | | | | | | |
|
||||
* `-------------------------------------------------------------'
|
||||
*/
|
||||
[_FL] = KEYMAP(
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_MPRV,KC_MPLY,KC_MNXT,KC_MUTE,KC_VOLD,KC_VOLU,RESET, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_PGUP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_HOME,KC_TRNS,KC_HOME,KC_PGDN,KC_END,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
|
||||
|
||||
/*
|
||||
* Locking layer for controlling the underglow.
|
||||
* NOTE: currently unused.
|
||||
*
|
||||
* ,-----------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | |On|Mode| | | | | | | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | |Hue+|Hue-|Sat+|Sat-|Val+|Val-| | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_UL] = KEYMAP(
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,F(4),F(5),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS,F(6),F(7),F(8),F(9),F(10),F(11),KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS,KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
RGBLED_TOGGLE,
|
||||
RGBLED_STEP_MODE,
|
||||
RGBLED_INCREASE_HUE,
|
||||
RGBLED_DECREASE_HUE,
|
||||
RGBLED_INCREASE_SAT,
|
||||
RGBLED_DECREASE_SAT,
|
||||
RGBLED_INCREASE_VAL,
|
||||
RGBLED_DECREASE_VAL,
|
||||
SHIFT_ESC,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_LAYER_MOMENTARY(2), // Momentary Fn overlay
|
||||
[1] = ACTION_LAYER_TOGGLE(1), // Toggle Arrow Layer overlay
|
||||
[2] = ACTION_LAYER_TAP_KEY(2, KC_CAPS), // Tap to toggle caps lock and hold to activate function layer
|
||||
[3] = ACTION_LAYER_TOGGLE(3), // Toggle Underglow Layer overlay
|
||||
[4] = ACTION_FUNCTION(RGBLED_TOGGLE), //Turn on/off underglow
|
||||
[5] = ACTION_FUNCTION(RGBLED_STEP_MODE), // Change underglow mode
|
||||
[6] = ACTION_FUNCTION(RGBLED_INCREASE_HUE),
|
||||
[7] = ACTION_FUNCTION(RGBLED_DECREASE_HUE),
|
||||
[8] = ACTION_FUNCTION(RGBLED_INCREASE_SAT),
|
||||
[9] = ACTION_FUNCTION(RGBLED_DECREASE_SAT),
|
||||
[10] = ACTION_FUNCTION(RGBLED_INCREASE_VAL),
|
||||
[11] = ACTION_FUNCTION(RGBLED_DECREASE_VAL),
|
||||
[12] = ACTION_FUNCTION(SHIFT_ESC),
|
||||
[13] = ACTION_LAYER_TAP_KEY(1, KC_SPACE),
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
// MACRODOWN only works in this function
|
||||
switch(id) {
|
||||
case 0:
|
||||
if (record->event.pressed) {
|
||||
register_code(KC_RSFT);
|
||||
} else {
|
||||
unregister_code(KC_RSFT);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
|
||||
// Layer LED indicators
|
||||
// ESC led on when in function layer, WASD cluster leds enabled when on arrow cluster
|
||||
uint32_t layer = layer_state;
|
||||
if (layer & (1<<1)) {
|
||||
gh60_wasd_leds_on();
|
||||
} else {
|
||||
gh60_wasd_leds_off();
|
||||
}
|
||||
|
||||
if (layer & (1<<2)) {
|
||||
gh60_esc_led_on();
|
||||
} else {
|
||||
gh60_esc_led_off();
|
||||
}
|
||||
};
|
||||
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
switch (id) {
|
||||
case RGBLED_TOGGLE:
|
||||
//led operations
|
||||
if (record->event.pressed) {
|
||||
rgblight_toggle();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_HUE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_hue();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_HUE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_hue();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_SAT:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_sat();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_SAT:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_sat();
|
||||
}
|
||||
break;
|
||||
case RGBLED_INCREASE_VAL:
|
||||
if (record->event.pressed) {
|
||||
rgblight_increase_val();
|
||||
}
|
||||
break;
|
||||
case RGBLED_DECREASE_VAL:
|
||||
if (record->event.pressed) {
|
||||
rgblight_decrease_val();
|
||||
}
|
||||
break;
|
||||
case RGBLED_STEP_MODE:
|
||||
if (record->event.pressed) {
|
||||
rgblight_step();
|
||||
}
|
||||
break;
|
||||
static uint8_t shift_esc_shift_mask;
|
||||
// Shift + ESC = ~
|
||||
case SHIFT_ESC:
|
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||
if (record->event.pressed) {
|
||||
if (shift_esc_shift_mask) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
if (shift_esc_shift_mask) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
};
|
||||
|
|
@ -14,7 +14,7 @@ extern keymap_config_t keymap_config;
|
|||
#define _FUNC 4
|
||||
#define ENDASH LALT(KC_MINS)
|
||||
#define POUND LALT(KC_3)
|
||||
|
||||
#define H(X) LALT(LCTL(X))
|
||||
|
||||
enum planck_keycodes {
|
||||
MOVE = SAFE_RANGE,
|
||||
|
|
@ -48,19 +48,19 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
|
||||
/* MOVE
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | Esc | | Home | Up | End | | | Home | Up | End | | Esc |
|
||||
* | H(3) | H(F1)| H(F2)| H(F3)| H(F4)| H(F5)| H(8) | Home | Up | End | H(7) | Esc |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Del | Caps | Left | Down | Right| | | Left | Down | Right| Caps | Del |
|
||||
* | H(4) | H(F6)| H(F7)| H(F8)| H(F9)|H(F10)| H(9) | Left | Down | Right| Caps | Del |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | Pg Up| Pg Dn| | | Pg Dn| Pg Up| | | |
|
||||
* | |H(F11)|H(F12)| H(0) | H(1) | H(2) | H(A) | Pg Dn| Pg Up| H(5) | H(6) | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_MOVE] = {
|
||||
{KC_ESC, XXXXXXX, KC_HOME, KC_UP, KC_END, XXXXXXX, XXXXXXX, KC_HOME, KC_UP, KC_END, XXXXXXX, KC_ESC },
|
||||
{KC_DEL, KC_CAPS, KC_LEFT, KC_DOWN, KC_RGHT, XXXXXXX, XXXXXXX, KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL },
|
||||
{_______, XXXXXXX, XXXXXXX, KC_PGUP, KC_PGDN, XXXXXXX, XXXXXXX, KC_PGDN, KC_PGUP, XXXXXXX, XXXXXXX, _______},
|
||||
{H(KC_3), H(KC_F1),H(KC_F2),H(KC_F3),H(KC_F4),H(KC_F5),H(KC_8), KC_HOME, KC_UP, KC_END, H(KC_7), KC_ESC },
|
||||
{H(KC_4), H(KC_F6),H(KC_F7),H(KC_F8),H(KC_F9),H(KC_F10),H(KC_9),KC_LEFT, KC_DOWN, KC_RGHT, KC_CAPS, KC_DEL },
|
||||
{_______, H(KC_F11),H(KC_F12),H(KC_0),H(KC_1),H(KC_2), H(KC_A), KC_PGDN, KC_PGUP, H(KC_5), H(KC_6), _______},
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
|
||||
},
|
||||
|
||||
|
|
@ -114,7 +114,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
[_FUNC] = {
|
||||
{RESET, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_VOLU},
|
||||
{XXXXXXX, KC_F11, KC_F12, KC_F13, KC_F14, KC_F15, KC_F16, KC_F17, KC_F18, KC_F19, KC_F20, KC_VOLD},
|
||||
{_______, KC_F21, KC_F22, KC_F23, KC_F24, XXXXXXX, XXXXXXX, KC_POWER, XXXXXXX, XXXXXXX, XXXXXXX, _______},
|
||||
{_______, KC_F21, KC_F22, KC_F23, KC_F24, XXXXXXX, XXXXXXX, KC_POWER,XXXXXXX, XXXXXXX, XXXXXXX, _______},
|
||||
{_______, _______, _______, _______, KC_MPRV, KC_MUTE, KC_MPLY, KC_MNXT, _______, _______, _______, _______}
|
||||
}
|
||||
|
||||
|
|
|
|||
|
|
@ -6,7 +6,7 @@ This is a layout for the grid planck, built with a few ideals in mind:
|
|||
- The hands should never need to leave the home position. The usual culprit for this is the arrow cluster, so the arrow cluster should be as close to home as possible.
|
||||
- There should be two of every modifier (one on each side), otherwise certain long key combinations become hard to make.
|
||||
|
||||
We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster and other movement keys; a `SYMB` layer, with numbers and symbols; a `FUNC` layer, with function keys and media keys; and a `MOUSE` layer, with mouse emulation. The `MOUSE` layer is activated by holding the Move and Symb keys simultaniously.
|
||||
We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow cluster, other movement keys, and hotkeys; a `SYMB` layer, with numbers and symbols; a `FUNC` layer, with function keys and media keys; and a `MOUSE` layer, with mouse emulation. The `MOUSE` layer is activated by holding the Move and Symb keys simultaniously.
|
||||
|
||||
```
|
||||
/* BASE
|
||||
|
|
@ -23,11 +23,11 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c
|
|||
|
||||
/* MOVE
|
||||
* ,-----------------------------------------------------------------------------------.
|
||||
* | Esc | | Home | Up | End | | | Home | Up | End | | Esc |
|
||||
* | H(3) | H(F1)| H(F2)| H(F3)| H(F4)| H(F5)| H(8) | Home | Up | End | H(7) | Esc |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Del | Caps | Left | Down | Right| | | Left | Down | Right| Caps | Del |
|
||||
* | H(4) | H(F6)| H(F7)| H(F8)| H(F9)|H(F10)| H(9) | Left | Down | Right| Caps | Del |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | Pg Up| Pg Dn| | | Pg Dn| Pg Up| | | |
|
||||
* | |H(F11)|H(F12)| H(0) | H(1) | H(2) | H(A) | Pg Dn| Pg Up| H(5) | H(6) | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
|
|
@ -68,4 +68,4 @@ We have five layers. A `BASE` layer, in colemak; a `MOVE` layer, with an arrow c
|
|||
* | | | | | Prev | Mute | Play | Next | | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
```
|
||||
```
|
||||
|
|
|
|||
|
|
@ -102,16 +102,16 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | _ | + | { | } | | |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | | |Enter |
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO ~ |ISO | | Home | End | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_LOWER] = {
|
||||
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
|
||||
{KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
|
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12,S(KC_NUHS),S(KC_NUBS),KC_HOME, KC_END, _______},
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
{KC_TILD, KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_BSPC},
|
||||
{KC_DEL, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_UNDS, KC_PLUS, KC_LCBR, KC_RCBR, KC_PIPE},
|
||||
{_______, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, S(KC_NUHS), S(KC_NUBS), KC_HOME, KC_END, _______},
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
},
|
||||
|
||||
/* Raise
|
||||
|
|
@ -120,7 +120,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | Del | F1 | F2 | F3 | F4 | F5 | F6 | - | = | [ | ] | \ |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / | | |Enter |
|
||||
* | | F7 | F8 | F9 | F10 | F11 | F12 |ISO # |ISO / |Pg Up |Pg Dn | |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | | | | | | | | Next | Vol- | Vol+ | Play |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
|
|
@ -138,7 +138,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
* |------+------+------+------+------+-------------+------+------+------+------+------|
|
||||
* | | S | T | P | H | * | * | F | P | L | T | D |
|
||||
* |------+------+------+------+------+------|------+------+------+------+------+------|
|
||||
* |TogOut| S | K | W | R | * | * | R | B | G | S | Z |
|
||||
* | | S | K | W | R | * | * | R | B | G | S | Z |
|
||||
* |------+------+------+------+------+------+------+------+------+------+------+------|
|
||||
* | Exit | | | A | O | | E | U | | | |
|
||||
* `-----------------------------------------------------------------------------------'
|
||||
|
|
@ -163,7 +163,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
* `-----------------------------------------------------------------------------------'
|
||||
*/
|
||||
[_ADJUST] = {
|
||||
{_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL},
|
||||
{_______, RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_DEL },
|
||||
{_______, _______, _______, AU_ON, AU_OFF, AG_NORM, AG_SWAP, QWERTY, COLEMAK, DVORAK, PLOVER, _______},
|
||||
{_______, MUV_DE, MUV_IN, MU_ON, MU_OFF, MI_ON, MI_OFF, _______, _______, _______, _______, _______},
|
||||
{_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______}
|
||||
|
|
|
|||
Binary file not shown.
|
Before Width: | Height: | Size: 52 KiB After Width: | Height: | Size: 52 KiB |
|
|
@ -60,7 +60,7 @@ const uint16_t PROGMEM fn_actions[] = {
|
|||
[7] = ACTION_MODS_KEY(MOD_LCTL, KC_UNDS),
|
||||
};
|
||||
|
||||
// This config can be found at Keyboard layout editor site: http://goo.gl/zjXL2l
|
||||
// This config can be found at Keyboard layout editor site: https://goo.gl/cF7uIO
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_QWERTY] = { /* QWERTY */
|
||||
{KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_BSPC},
|
||||
|
|
@ -69,22 +69,22 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
|||
{KC_LCTL, KC_ESC, KC_LGUI, KC_LALT, LOWER, KC_SPC, KC_SPC, RAISE, KC_LEFT, KC_DOWN, KC_UP, KC_RGHT}
|
||||
},
|
||||
[_LOWER] = { /* LOWER */
|
||||
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_UNDS, KC_LPRN, KC_RPRN, KC_LCBR, KC_RCBR, KC_MINS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LBRC, KC_RBRC, KC_QUOT, KC_DQT, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{KC_TRNS, ZM_NRM, ZM_IN, ZM_OUT, KC_TRNS, KC_PGDN, KC_PGDN, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
|
||||
},
|
||||
[_RAISE] = { /* RAISE */
|
||||
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_LCBR, KC_LCBR, KC_BSLS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, KC_LBRC, KC_LBRC, KC_TRNS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
{KC_EXLM, KC_AT, KC_HASH, KC_DLR, KC_PERC, KC_CIRC, KC_AMPR, KC_ASTR, KC_LPRN, KC_RPRN, KC_UNDS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_EQL, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PLUS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_BSLS, KC_PIPE, KC_GRV, KC_TILD, S(KC_COMM), S(KC_DOT), KC_BSLS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_PGUP, KC_PGUP, KC_TRNS, KC_MNXT, KC_VOLD, KC_VOLU, KC_MPLY}
|
||||
},
|
||||
[_CUSTOM] = { /* CUSTOM */
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS4, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{BL, RESET, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
|
||||
{KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, CUS0, CUS3, CUS4, KC_TRNS, KC_F12, KC_TRNS},
|
||||
{KC_TRNS, KC_TRNS, CUT, COPY, PASTE, CUS1, CUS5, CUS2, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS},
|
||||
{BL, RESET, LALT(LCTL(KC_DEL)), KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS}
|
||||
}
|
||||
};
|
||||
|
||||
|
|
|
|||
|
|
@ -3,6 +3,7 @@
|
|||
"backcolor": "#858585",
|
||||
"name": "Planck 40%",
|
||||
"author": "James Folkert",
|
||||
"notes": "# Espynn's keymap for Planck Ortholinear 40% Mechanical Keyboard\nAdded several custom functions to the keymap from the \"ab\" map. Special thanks to \"mollat\" for demonstration of macros in their keymap.c\n \n\n![Layout](keyboard-layout.png \"Practical Keymap\")\n\n* Online keyboard layout editor: http://goo.gl/mlLAFZ\n\n# Notes\n* Front legend text is the custom layer (both raise and lower)\n* Holding is denoted by down arrow, for example, right shift is an enter button when tapped, shift when held\n* Simultaneous RAISE+LOWER enters CUSTOM layer. Several custom keymaps are here\n* I disregarded the advice of Jack and used macros for passwords. I accept my fate.\n* RAISE and LOWER also acts as PgUp and PgDn when tapped.\n* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works)\n* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.",
|
||||
"background": {
|
||||
"name": "Aluminium brushed",
|
||||
"style": "background-image: url('/bg/metal/aluminum_texture1642.jpg');"
|
||||
|
|
@ -19,41 +20,49 @@
|
|||
2,
|
||||
2,
|
||||
0,
|
||||
2
|
||||
0
|
||||
]
|
||||
},
|
||||
"F1\n1\n\n!\n\n\n\n\n\n<i class='kb kb-Tab-2'></i>",
|
||||
"F2\n2\n\n@\n\n\n\n\n\nQ",
|
||||
"F3\n3\n\n#\n\n\n\n\n\nW",
|
||||
"F4\n4\n\n$\n\n\n\n\n\nE",
|
||||
"F5\n5\n\n%\n\n\n\n\n\nR",
|
||||
"F6\n6\n\n^\n\n\n\n\n\nT",
|
||||
"F7\n6\n\n&\n\n\n\n\n\nY",
|
||||
"F8\n8\n\n*\nMacro4\n\n\n\n\nU",
|
||||
"F9\n9\n\n(\n\n\n\n\n\nI",
|
||||
"!\n1\n\n\nF1\n\n\n\n\n<i class='kb kb-Tab-2'></i>",
|
||||
"@\n2\n\n\nF2\n\n\n\n\nQ",
|
||||
"#\n3\n\n\nF3\n\n\n\n\nW",
|
||||
"$\n4\n\n\nF4\n\n\n\n\nE",
|
||||
"%\n5\n\n\nF5\n\n\n\n\nR",
|
||||
"^\n6\n\n\nF6\n\n\n\n\nT",
|
||||
"&\n7\n\n\nF7\n\n\n\n\nY",
|
||||
"*\n8\n\n\nF8\n\n\n\n\nU",
|
||||
"(\n9\n\n\nF9\n\n\n\n\nI",
|
||||
{
|
||||
"fa": [
|
||||
2,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
2
|
||||
0
|
||||
]
|
||||
},
|
||||
"F10\n0\n\n)\n\n\n\n\n\nO",
|
||||
")\n0\n\n\nF10\n\n\n\n\nO",
|
||||
{
|
||||
"fa": [
|
||||
2,
|
||||
2,
|
||||
0,
|
||||
2
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0
|
||||
]
|
||||
},
|
||||
"F11\n-\n\n_\n\n\n\n\n\nP",
|
||||
"F12\n=\n\n+\n\n\n\n\n\n<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>"
|
||||
"_\n-\n\n\nF11\n\n\n\n\nP",
|
||||
{
|
||||
"a": 7,
|
||||
"f": 3
|
||||
},
|
||||
"<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>"
|
||||
],
|
||||
[
|
||||
{
|
||||
"a": 7,
|
||||
"f": 3
|
||||
},
|
||||
"<i class='mss mss-Unicode-DeleteRight-Big-2'></i>",
|
||||
|
|
@ -66,12 +75,12 @@
|
|||
},
|
||||
"S",
|
||||
{
|
||||
"a": 4,
|
||||
"f": 3
|
||||
},
|
||||
"D",
|
||||
"=\n_\n\n\n\n\n\n\n\nD",
|
||||
{
|
||||
"t": "#ff0000",
|
||||
"a": 4,
|
||||
"f": 3
|
||||
},
|
||||
"\n(\n\n\n\n\n\n\n\nF",
|
||||
|
|
@ -93,24 +102,21 @@
|
|||
"t": "#000000",
|
||||
"f": 3
|
||||
},
|
||||
"{\n\n\n\n\n\n\n\n\nK",
|
||||
"+\n-\n\n\nMacro4\n\n\n\n\nK",
|
||||
{
|
||||
"a": 7,
|
||||
"f": 3
|
||||
},
|
||||
"{\n\n\n\n\n\n\n\n\nL",
|
||||
"L",
|
||||
{
|
||||
"a": 6,
|
||||
"fa": [
|
||||
2,
|
||||
2,
|
||||
2,
|
||||
2,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
2
|
||||
]
|
||||
},
|
||||
"\\\n\n|\n\n\n\n\n:\n\n;",
|
||||
"\n\n:\n\nF12\n\n\n\n;",
|
||||
{
|
||||
"a": 7,
|
||||
"fa": [
|
||||
|
|
@ -141,66 +147,79 @@
|
|||
"fa": [
|
||||
2,
|
||||
2,
|
||||
2,
|
||||
2
|
||||
0,
|
||||
0
|
||||
]
|
||||
},
|
||||
"\\\n[\n|\n{\nPaste\n\n\n\n\nV",
|
||||
"|\n]\n\n}\nMacro1\n\n\n\n\nB",
|
||||
"`\n'\n~\n\"\nMacro5\n\n\n\n\nN",
|
||||
"\\\n[\n\n\nPaste\n\n\n\n\nV",
|
||||
"|\n]\n\n\nMacro1\n\n\n\n\nB",
|
||||
"`\n'\n\n\nMacro5\n\n\n\n\nN",
|
||||
"~\n\"\n\n\nMacro2\n\n\n\n\nM",
|
||||
{
|
||||
"fa": [
|
||||
2,
|
||||
2,
|
||||
2,
|
||||
2,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
1
|
||||
0,
|
||||
0,
|
||||
2
|
||||
]
|
||||
},
|
||||
"[\n\n{\n\n\n\n\n<\n\n,",
|
||||
"[\n\n{\n\n\n\n\n\n\n.",
|
||||
"<\n\n\n\n\n\n\n<\n\n,",
|
||||
{
|
||||
"a": 6
|
||||
},
|
||||
"\n\n?\n\n\n\n\n\n/",
|
||||
{
|
||||
"a": 4,
|
||||
"fa": [
|
||||
2,
|
||||
2,
|
||||
0
|
||||
]
|
||||
},
|
||||
">\n\n\n\n\n\n\n>\n\n.",
|
||||
{
|
||||
"fa": [
|
||||
0,
|
||||
2,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
1,
|
||||
9,
|
||||
0
|
||||
0,
|
||||
2
|
||||
]
|
||||
},
|
||||
"\\\n\n\n\n\n\n\n?\n\n/",
|
||||
{
|
||||
"fa": [
|
||||
0,
|
||||
2,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
2,
|
||||
9
|
||||
]
|
||||
},
|
||||
"\n\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift\n\n\n\n\n<i class='mss mss-Unicode-Enter-3'></i>\n\n<i class='kb kb-Arrows-Bottom-4'></i>Shift"
|
||||
],
|
||||
[
|
||||
{
|
||||
"a": 7,
|
||||
"f": 3
|
||||
"a": 7
|
||||
},
|
||||
"Ctrl\n\n\n\nBLight",
|
||||
{
|
||||
"a": 4,
|
||||
"fa": [
|
||||
2,
|
||||
1,
|
||||
2,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
1,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
2,
|
||||
9,
|
||||
9
|
||||
]
|
||||
|
|
@ -208,29 +227,29 @@
|
|||
"\nZNorm\n\n\nRESET\n\n\n\n\n<i class='mss mss-Unicode-Escape-3'></i>",
|
||||
{
|
||||
"fa": [
|
||||
2,
|
||||
1,
|
||||
2,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
1,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
2,
|
||||
9,
|
||||
6
|
||||
]
|
||||
},
|
||||
"\nZIn\n\n\n\n\n\n\n\n<i class='kb kb-logo-windows-8'></i>",
|
||||
"\nZIn\n\n\nc.a.del\n\n\n\n\n<i class='kb kb-logo-windows-8'></i>",
|
||||
{
|
||||
"fa": [
|
||||
2,
|
||||
1,
|
||||
2,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
1,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
0,
|
||||
2,
|
||||
9,
|
||||
9
|
||||
]
|
||||
|
|
|
|||
|
|
@ -3,7 +3,7 @@ Created by James Folkert: https://twitter.com/trekloFsemaJ
|
|||
Added several custom functions to the keymap from the "ab" map. Special thanks to "mollat" for demonstration of macros in their keymap.c
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
* Online keyboard layout editor: http://www.keyboard-layout-editor.com/
|
||||
|
|
@ -14,5 +14,11 @@ Added several custom functions to the keymap from the "ab" map. Special thanks t
|
|||
* I disregarded the advice of Jack and used macros for passwords. I accept my fate. These have been abstracted to macros 2, 3, and 4
|
||||
* add your mobile and email to the keymap before make
|
||||
* RAISE and LOWER also acts as PgUp and PgDn when tapped.
|
||||
* [CapsLock] also acts as [Ctrl] key when you press and hold. It is convenient for GNU Emacs users. (not sure if this works)
|
||||
* Bracket/ paran/ brace keys are placed in the center of the keyboard for programmer's convenience.
|
||||
|
||||
## changes
|
||||
* Removed some unneeded keys from raise and lower layers
|
||||
* moved the + and = signs, backspace is now more intuitive
|
||||
* moved all the Function keys to CUSTOM layer
|
||||
* added ctrl alt del to CUSTOM layer
|
||||
* simplified the layout picture greatly
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
ifndef MAKEFILE_INCLUDED
|
||||
include ../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,162 @@
|
|||
/*
|
||||
Copyright 2012 Jun Wako <wakojun@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_H
|
||||
#define CONFIG_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xFEAE
|
||||
#define PRODUCT_ID 0x8846
|
||||
#define DEVICE_VER 0x0001
|
||||
#define MANUFACTURER TheVan Keyboards
|
||||
#define PRODUCT Roadkit Micro
|
||||
#define DESCRIPTION keyboard firmware for Roadkit Micro
|
||||
|
||||
/* key matrix size */
|
||||
#define MATRIX_ROWS 4
|
||||
#define MATRIX_COLS 4
|
||||
|
||||
/*
|
||||
* Keyboard Matrix Assignments
|
||||
*
|
||||
* Change this to how you wired your keyboard
|
||||
* COLS: AVR pins used for columns, left to right
|
||||
* ROWS: AVR pins used for rows, top to bottom
|
||||
* DIODE_DIRECTION: COL2ROW = COL = Anode (+), ROW = Cathode (-, marked on diode)
|
||||
* ROW2COL = ROW = Anode (+), COL = Cathode (-, marked on diode)
|
||||
*
|
||||
*/
|
||||
#define MATRIX_ROW_PINS { F0, F5, D7, B4 }
|
||||
#define MATRIX_COL_PINS { F1, F4, D6, D4 }
|
||||
#define UNUSED_PINS
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
// #define BACKLIGHT_PIN B7
|
||||
// #define BACKLIGHT_BREATHING
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
|
||||
/* Debounce reduces chatter (unintended double-presses) - set 0 if debouncing is not needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* define if matrix has ghost (lacks anti-ghosting diodes) */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/*
|
||||
* Force NKRO
|
||||
*
|
||||
* Force NKRO (nKey Rollover) to be enabled by default, regardless of the saved
|
||||
* state in the bootmagic EEPROM settings. (Note that NKRO must be enabled in the
|
||||
* makefile for this to work.)
|
||||
*
|
||||
* If forced on, NKRO can be disabled via magic key (default = LShift+RShift+N)
|
||||
* until the next keyboard reset.
|
||||
*
|
||||
* NKRO may prevent your keystrokes from being detected in the BIOS, but it is
|
||||
* fully operational during normal computer usage.
|
||||
*
|
||||
* For a less heavy-handed approach, enable NKRO via magic key (LShift+RShift+N)
|
||||
* or via bootmagic (hold SPACE+N while plugging in the keyboard). Once set by
|
||||
* bootmagic, NKRO mode will always be enabled until it is toggled again during a
|
||||
* power-up.
|
||||
*
|
||||
*/
|
||||
//#define FORCE_NKRO
|
||||
|
||||
/*
|
||||
* Magic Key Options
|
||||
*
|
||||
* Magic keys are hotkey commands that allow control over firmware functions of
|
||||
* the keyboard. They are best used in combination with the HID Listen program,
|
||||
* found here: https://www.pjrc.com/teensy/hid_listen.html
|
||||
*
|
||||
* The options below allow the magic key functionality to be changed. This is
|
||||
* useful if your keyboard/keypad is missing keys and you want magic key support.
|
||||
*
|
||||
*/
|
||||
|
||||
/* key combination for magic key command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
/* control how magic key switches layers */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS true
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM false
|
||||
|
||||
/* override magic key keymap */
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_FKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_NKEYS
|
||||
//#define MAGIC_KEY_SWITCH_LAYER_WITH_CUSTOM
|
||||
//#define MAGIC_KEY_HELP1 H
|
||||
//#define MAGIC_KEY_HELP2 SLASH
|
||||
//#define MAGIC_KEY_DEBUG D
|
||||
//#define MAGIC_KEY_DEBUG_MATRIX X
|
||||
//#define MAGIC_KEY_DEBUG_KBD K
|
||||
//#define MAGIC_KEY_DEBUG_MOUSE M
|
||||
//#define MAGIC_KEY_VERSION V
|
||||
//#define MAGIC_KEY_STATUS S
|
||||
//#define MAGIC_KEY_CONSOLE C
|
||||
//#define MAGIC_KEY_LAYER0_ALT1 ESC
|
||||
//#define MAGIC_KEY_LAYER0_ALT2 GRAVE
|
||||
//#define MAGIC_KEY_LAYER0 0
|
||||
//#define MAGIC_KEY_LAYER1 1
|
||||
//#define MAGIC_KEY_LAYER2 2
|
||||
//#define MAGIC_KEY_LAYER3 3
|
||||
//#define MAGIC_KEY_LAYER4 4
|
||||
//#define MAGIC_KEY_LAYER5 5
|
||||
//#define MAGIC_KEY_LAYER6 6
|
||||
//#define MAGIC_KEY_LAYER7 7
|
||||
//#define MAGIC_KEY_LAYER8 8
|
||||
//#define MAGIC_KEY_LAYER9 9
|
||||
//#define MAGIC_KEY_BOOTLOADER PAUSE
|
||||
//#define MAGIC_KEY_LOCK CAPS
|
||||
//#define MAGIC_KEY_EEPROM E
|
||||
//#define MAGIC_KEY_NKRO N
|
||||
//#define MAGIC_KEY_SLEEP_LED Z
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
//#define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
//#define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
#include "roadkit.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
|
||||
#define _NP 0
|
||||
|
||||
// Macro name shortcuts
|
||||
#define NUMPAD M(_NP)
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_NP] = /* Numpad */
|
||||
KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \
|
||||
KC_KP_4, KC_KP_5, KC_KP_6, \
|
||||
KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \
|
||||
KC_KP_0, KC_KP_DOT),
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
void persistant_default_layer_set(uint16_t default_layer) {
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {
|
||||
case _NP:
|
||||
if (record->event.pressed) {
|
||||
persistant_default_layer_set(1UL<<_NP);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
|
@ -0,0 +1 @@
|
|||
# The default keymap for roadkit
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,8 @@
|
|||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "../../config.h"
|
||||
|
||||
// place overrides here
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,61 @@
|
|||
#include "roadkit.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
|
||||
#define _NP 0
|
||||
#define _L1 1
|
||||
|
||||
// Macro name shortcuts
|
||||
#define NUMPAD M(_NP)
|
||||
#define LAYER1 M(_L1)
|
||||
|
||||
// Fillers to make layering more clear
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
[_NP] = /* Numpad */
|
||||
SINGLES_KEYMAP(KC_KP_7, KC_KP_8, KC_KP_9, KC_KP_PLUS, \
|
||||
KC_KP_4, KC_KP_5, KC_KP_6, KC_KP_MINUS, \
|
||||
KC_KP_1, KC_KP_2, KC_KP_3, KC_KP_ENTER, \
|
||||
KC_KP_0, KC_KP_DOT, TG(_L1), KC_BSPC),
|
||||
[_L1] = /* LAYER 1 */
|
||||
SINGLES_KEYMAP(KC_NUMLOCK, KC_TRNS, KC_TRNS, KC_VOLU, \
|
||||
KC_TRNS, KC_UP, KC_TRNS, KC_VOLD, \
|
||||
KC_LEFT, KC_DOWN, KC_RIGHT, KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS, KC_TRNS, KC_TRNS)
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
|
||||
};
|
||||
|
||||
void persistant_default_layer_set(uint16_t default_layer) {
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt)
|
||||
{
|
||||
switch(id) {
|
||||
case _L1:
|
||||
if (record->event.pressed) {
|
||||
persistant_default_layer_set(1UL<<_L1);
|
||||
}
|
||||
break;
|
||||
case _NP:
|
||||
if (record->event.pressed) {
|
||||
persistant_default_layer_set(1UL<<_NP);
|
||||
}
|
||||
break;
|
||||
}
|
||||
return MACRO_NONE;
|
||||
};
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
# The singles keymap for roadkit
|
||||
|
||||
This keymap has a base layer with numpad functionality, and then a second layer with some additional keys. The user is encouraged to develop their own keymap using this as a starting point.
|
||||
|
|
@ -0,0 +1,32 @@
|
|||
roadkit keyboard firmware
|
||||
======================
|
||||
|
||||
## Quantum MK Firmware
|
||||
|
||||
For the full Quantum feature list, see [the QMK Wiki](https://github.com/qmk/qmk_firmware/wiki).
|
||||
|
||||
## Building
|
||||
|
||||
Download or clone the whole firmware and navigate to the `keyboards/roadkit` folder. Once your dev env is setup, you'll be able to type `make` to generate your .hex. You can then use the programmer of your choice to program your .hex file.
|
||||
|
||||
Depending on which keymap you would like to use, you will have to compile slightly differently.
|
||||
|
||||
### Default
|
||||
|
||||
To build with the default keymap, simply run `make default`. For the roadkit, the default layout is a standard numpad layout.
|
||||
|
||||
### Singles
|
||||
|
||||
The singles layout for the roadkit corresponds to the configuration where only 1u keys are used and there are 16 of them on the board. To build the singles keymap, run `make singles`.
|
||||
|
||||
### Other Keymaps
|
||||
|
||||
Several version of keymap are available in advance but you are recommended to define your favorite layout yourself. To define your own keymap create a folder with the name of your keymap in the keymaps folder, and see keymap documentation (you can find in top readme.md) and existant keymap files.
|
||||
|
||||
To build the firmware binary hex file with a keymap just do `make` with a keymap like this:
|
||||
|
||||
```
|
||||
$ make [default|jack|<name>]
|
||||
```
|
||||
|
||||
Keymaps follow the format **__keymap.c__** and are stored in folders in the `keymaps` folder, eg `keymaps/my_keymap/`
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
#include "roadkit.h"
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
// put your keyboard start-up code here
|
||||
// runs once when the firmware starts up
|
||||
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
void matrix_scan_kb(void) {
|
||||
// put your looping keyboard code here
|
||||
// runs every cycle (a lot)
|
||||
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
bool process_record_kb(uint16_t keycode, keyrecord_t *record) {
|
||||
// put your per-action keyboard code here
|
||||
// runs for every action, just before processing by the firmware
|
||||
|
||||
return process_record_user(keycode, record);
|
||||
}
|
||||
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
|
|
@ -0,0 +1,33 @@
|
|||
#ifndef ROADKIT_H
|
||||
#define ROADKIT_H
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// This is a shortcut to help you visually see your layout.
|
||||
#define KEYMAP( \
|
||||
K00, K01, K02, K03, \
|
||||
K10, K11, K12, \
|
||||
K20, K21, K22, K23, \
|
||||
K30, K32 \
|
||||
) \
|
||||
{ \
|
||||
{ K00, K01, K02, K03 }, \
|
||||
{ K10, K11, K12, KC_NO }, \
|
||||
{ K20, K21, K22, K23 }, \
|
||||
{ K30, KC_NO, K32, KC_NO } \
|
||||
}
|
||||
|
||||
#define SINGLES_KEYMAP( \
|
||||
K00, K01, K02, K03, \
|
||||
K10, K11, K12, K13, \
|
||||
K20, K21, K22, K23, \
|
||||
K30, K31, K32, K33 \
|
||||
) \
|
||||
{ \
|
||||
{ K00, K01, K02, K03 }, \
|
||||
{ K10, K11, K12, K13 }, \
|
||||
{ K20, K21, K22, K23 }, \
|
||||
{ K30, K31, K32, K33 } \
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,69 @@
|
|||
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
|
||||
# Boot Section Size in *bytes*
|
||||
# Teensy halfKay 512
|
||||
# Teensy++ halfKay 1024
|
||||
# Atmel DFU loader 4096
|
||||
# LUFA bootloader 4096
|
||||
# USBaspLoader 2048
|
||||
OPT_DEFS += -DBOOTLOADER_SIZE=4096
|
||||
|
||||
|
||||
# Build Options
|
||||
# change yes to no to disable
|
||||
#
|
||||
BOOTMAGIC_ENABLE ?= yes # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE ?= yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE ?= yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE ?= yes # Console for debug(+400)
|
||||
COMMAND_ENABLE ?= yes # Commands for debug and configuration
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE ?= no # Breathing sleep LED during USB suspend
|
||||
# if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
NKRO_ENABLE ?= yes # USB Nkey Rollover
|
||||
BACKLIGHT_ENABLE ?= no # Enable keyboard backlight functionality on B7 by default
|
||||
MIDI_ENABLE ?= no # MIDI controls
|
||||
UNICODE_ENABLE ?= no # Unicode
|
||||
BLUETOOTH_ENABLE ?= no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
AUDIO_ENABLE ?= no # Audio output on port C6
|
||||
|
|
@ -0,0 +1,21 @@
|
|||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = yes # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
Unxmaal's GH60 Satan Layout
|
||||
=====================
|
||||
* Mostly stolen from /u/robotmaxtron
|
||||
|
||||
##Quantum MK Firmware
|
||||
For the full Quantum feature list, see the parent readme.md.
|
||||
|
||||
* Standard Mac ANSI layout
|
||||
* Spacebar acts as space when tapped, Fn when held
|
||||
* Menu acts as menu when tapped, Fn2 when held
|
||||
* Layer1:
|
||||
* Top row = `~, F1-F12, Del
|
||||
* JKIL = arrow cluster
|
||||
* Layer2:
|
||||
* Top row = media controls
|
||||
* JKIL = PgDn/Up/Home/Insert
|
||||
* Backspace = Reset
|
||||
|
||||
### Additional Credits
|
||||
Keymap has been based on various keymaps available from the QMK Repo for the GH60-SATAN and KC60 keyboards.
|
||||
|
|
@ -0,0 +1,119 @@
|
|||
#include "satan.h"
|
||||
|
||||
|
||||
// Used for SHIFT_ESC
|
||||
#define MODS_CTRL_MASK (MOD_BIT(KC_LSHIFT)|MOD_BIT(KC_RSHIFT))
|
||||
|
||||
// Each layer gets a name for readability, which is then used in the keymap matrix below.
|
||||
// The underscores don't mean anything - you can have a layer called STUFF or any other name.
|
||||
// Layer names don't all need to be of the same length, obviously, and you can also skip them
|
||||
// entirely and just use numbers.
|
||||
#define _BL 0
|
||||
#define _AL 1
|
||||
#define _FL 2
|
||||
|
||||
#define _______ KC_TRNS
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
/*
|
||||
* ANSI Base, Mac style
|
||||
* ,-----------------------------------------------------------------------------.
|
||||
* |Esc | 1| 2| 3| 4| 5| 6| 7| 8| 9| 0| -| = | Backsp |
|
||||
* |-----------------------------------------------------------------------------|
|
||||
* |Tab | Q | W | E | R | T | Y | U | I| O| P| [| ]| \|
|
||||
* |-----------------------------------------------------------------------------|
|
||||
* |Caps/Fn | A| S| D| F| G| H| J| K| L| ;| '| Enter |
|
||||
* |-----------------------------------------------------------------------------|
|
||||
* |Shift | Z| X| C| V| B| N| M| ,| .| /| Shift |
|
||||
* |-----------------------------------------------------------------------------|
|
||||
* |Fn|Alt |Gui | Space(tapped), Fn(held) |Gui |Alt |Menu(tapped, Fn2(held)|Ctrl|
|
||||
* `-----------------------------------------------------------------------------'
|
||||
*/
|
||||
[_BL] = KEYMAP_ANSI(
|
||||
KC_ESC, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, \
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, \
|
||||
KC_LCTL, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, \
|
||||
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, \
|
||||
MO(_AL), KC_LALT,KC_LGUI, LT(_AL,KC_SPACE), KC_RGUI, KC_RALT, LT(_FL,KC_MENU), KC_RCTL),
|
||||
/*
|
||||
* Pok3r style arrow cluster
|
||||
* ,-----------------------------------------------------------.
|
||||
* |`~ | F1| F2| F3| F4| F5| F6| F7| F8| F9| F10| F11| F12|DEL |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | |Up| | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | |Left|Down|Right| | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_AL] = KEYMAP_ANSI(
|
||||
KC_GRV, KC_F1, KC_F2,KC_F3,KC_F4,KC_F5,KC_F6,KC_F7,KC_F8,KC_F9,KC_F10,KC_F11,KC_F12,KC_DELETE, \
|
||||
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_UP,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_LEFT,KC_DOWN,KC_RGHT,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS, \
|
||||
KC_TRNS, KC_TRNS,KC_TRNS, KC_TRNS, KC_TRNS,KC_TRNS,KC_TRNS,KC_TRNS),
|
||||
/* Keymap _FL: Function Layer
|
||||
* ,-----------------------------------------------------------.
|
||||
* | | | | | | | | | | | | | | RESET|
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | | | | |BL-|BL+|BL |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | | | | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | RGB on|RGB step|Hue+|Hue- |Sat+|Sat-|Val+| Val-| | | |
|
||||
* |-----------------------------------------------------------|
|
||||
* | | | | | | | | |
|
||||
* `-----------------------------------------------------------'
|
||||
*/
|
||||
[_FL] = KEYMAP_ANSI(
|
||||
#ifdef RGBLIGHT_ENABLE
|
||||
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC,BL_INC, BL_TOGG, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, _______, \
|
||||
_______,RGB_TOG,RGB_MOD,RGB_HUI,RGB_HUD,RGB_SAI,RGB_SAD,RGB_VAI,RGB_VAD,_______,_______,_______, \
|
||||
_______,_______,_______, _______, _______,_______,_______, _______),
|
||||
#else
|
||||
_______, _______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,RESET, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, BL_DEC, BL_INC,BL_TOGG, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
|
||||
_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______,_______, \
|
||||
_______,_______,_______, _______, _______,_______,_______,_______),
|
||||
#endif
|
||||
};
|
||||
|
||||
enum function_id {
|
||||
SHIFT_ESC,
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[0] = ACTION_FUNCTION(SHIFT_ESC),
|
||||
};
|
||||
|
||||
void action_function(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
static uint8_t shift_esc_shift_mask;
|
||||
switch (id) {
|
||||
case SHIFT_ESC:
|
||||
shift_esc_shift_mask = get_mods()&MODS_CTRL_MASK;
|
||||
if (record->event.pressed) {
|
||||
if (shift_esc_shift_mask) {
|
||||
add_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
add_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
} else {
|
||||
if (shift_esc_shift_mask) {
|
||||
del_key(KC_GRV);
|
||||
send_keyboard_report();
|
||||
} else {
|
||||
del_key(KC_ESC);
|
||||
send_keyboard_report();
|
||||
}
|
||||
}
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
|
@ -257,7 +257,7 @@ bool process_tapping(keyrecord_t *keyp)
|
|||
return true;
|
||||
}
|
||||
} else {
|
||||
if (!IS_NOEVENT(event)) debug("Tapping: other key just after tap.\n") {};
|
||||
if (!IS_NOEVENT(event)) debug("Tapping: other key just after tap.\n");
|
||||
process_record(keyp);
|
||||
return true;
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue