Merge remote-tracking branch 'upstream/master'

Dockerfile

@@ -20,7 +20,7 @@ RUN apt-get install --no-install-recommends -y build-essential \
 RUN apt-get clean
 RUN rm -rf /var/lib/apt/lists/*
 
-ENV keyboard=ergodox_ez
+ENV keyboard=ergodox
 ENV keymap=default
 
 VOLUME /qmk

Vagrantfile

@@ -91,7 +91,7 @@ Vagrant.configure(2) do |config|
 
   Or you can copy and paste the example line below.
 
-  cd /vagrant; cd keyboards; cd ergodox_ez; make clean; make
+  cd /vagrant; cd keyboards; cd ergodox; make clean; make
 
 
   EOT

doc/TMK_README.md

@@ -34,7 +34,7 @@ You can find some keyboard specific projects under `converter` and `keyboard` di
 * [atomic](keyboards/atomic/)                - [Atomic] Ortholinear 60% keyboard
 
 ### Ergodox EZ
-* [ergodox_ez](keyboards/ergodox_ez)         - [Ergodox_EZ] Assembled split keyboard
+* [ergodox_ez](keyboards/ergodox/ez)         - [Ergodox_EZ] Assembled split keyboard
 
 ## Other projects
 

doc/VAGRANT_GUIDE.md

@@ -20,7 +20,7 @@ See [/doc/keymap.md](/doc/keymap.md).
 
 ## Flashing the firmware
 
-The "easy" way to flash the firmware is using a tool from your host OS like the Teensy programming app. [ErgoDox EZ](/keyboards/ergodox_ez/readme.md) gives a great example.
+The "easy" way to flash the firmware is using a tool from your host OS like the Teensy programming app. [ErgoDox EZ](/keyboards/ergodox/readme.md) gives a great example.
 
 If you want to program via the command line you can uncomment the ['modifyvm'] lines in the Vagrantfile to enable the USB passthrough into Linux and then program using the command line tools like dfu-util/dfu-programmer or you can install the Teensy CLI version.
 	

keyboards/ergodox/Makefile

@@ -0,0 +1,34 @@
+#----------------------------------------------------------------------------
+# On command line:
+#
+# make = Make software.
+#
+# make clean = Clean out built project files.
+#
+# That's pretty much all you need. To compile, always go make clean, 
+# followed by make.
+#
+# For advanced users only:
+# make teensy = Download the hex file to the device, using teensy_loader_cli.
+#               (must have teensy_loader_cli installed).
+#
+#----------------------------------------------------------------------------
+SUBPROJECT_DEFAULT = ez
+
+# Build Options
+#   comment out to disable the options.
+#
+BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
+MOUSEKEY_ENABLE  ?= yes # Mouse keys(+4700)
+EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
+CONSOLE_ENABLE   ?= no  # Console for debug(+400)
+COMMAND_ENABLE   ?= yes # Commands for debug and configuration
+CUSTOM_MATRIX    ?= yes # Custom matrix file for the ErgoDox EZ
+SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
+NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
+MIDI_ENABLE      ?= no  # MIDI controls
+UNICODE_ENABLE   ?= yes # Unicode
+
+ifndef QUANTUM_DIR
+	include ../../Makefile
+endif

keyboards/ergodox/config.h

@@ -0,0 +1,36 @@
+#ifndef KEYBOARDS_ERGODOX_CONFIG_H_
+#define KEYBOARDS_ERGODOX_CONFIG_H_
+
+#define MOUSEKEY_DELAY          100
+#define MOUSEKEY_INTERVAL       20
+#define MOUSEKEY_MAX_SPEED      3
+#define MOUSEKEY_TIME_TO_MAX    10
+
+#define TAPPING_TOGGLE  1
+
+/* define if matrix has ghost */
+//#define MATRIX_HAS_GHOST
+
+#define TAPPING_TERM    200
+#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
+
+/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
+#define LOCKING_SUPPORT_ENABLE
+/* Locking resynchronize hack */
+#define LOCKING_RESYNC_ENABLE
+
+/* key combination for command */
+#define IS_COMMAND() ( \
+    keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
+    keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
+)
+
+#ifdef SUBPROJECT_ez
+    #include "ez/config.h"
+#endif
+#ifdef SUBPROJECT_infinity
+    #include "infinity/config.h"
+#endif
+
+
+#endif /* KEYBOARDS_ERGODOX_CONFIG_H_ */

keyboards/ergodox/ergodox.h

@@ -0,0 +1,10 @@
+#ifndef KEYBOARDS_ERGODOX_ERGODOX_H_
+#define KEYBOARDS_ERGODOX_ERGODOX_H_
+#ifdef SUBPROJECT_ez
+    #include "ez.h"
+#endif
+#ifdef SUBPROJECT_infinity
+    #include "infinity.h"
+#endif
+
+#endif /* KEYBOARDS_ERGODOX_ERGODOX_H_ */

keyboards/ergodox/ez/Makefile

@@ -70,17 +70,7 @@ OPT_DEFS += -DBOOTLOADER_SIZE=512
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= no  # Virtual DIP switch configuration(+1000)
-MOUSEKEY_ENABLE  ?= yes # Mouse keys(+4700)
-EXTRAKEY_ENABLE  ?= yes # Audio control and System control(+450)
-CONSOLE_ENABLE   ?= no  # Console for debug(+400)
-COMMAND_ENABLE   ?= yes # Commands for debug and configuration
-CUSTOM_MATRIX    ?= yes # Custom matrix file for the ErgoDox EZ
-SLEEP_LED_ENABLE ?= yes # Breathing sleep LED during USB suspend
-NKRO_ENABLE      ?= yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
-MIDI_ENABLE      ?= no  # MIDI controls
-UNICODE_ENABLE   ?= yes # Unicode
 
 ifndef QUANTUM_DIR
-	include ../../Makefile
+	include ../../../Makefile
 endif

keyboards/ergodox/ez/config.h

@@ -16,10 +16,10 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#ifndef ERGODOX_EZ_CONFIG_H
-#define CONFIG_H
+#define ERGODOX_EZ_CONFIG_H
 
-#include "config_common.h"
+#include "../config.h"
 
 /* USB Device descriptor parameter */
 #define VENDOR_ID       0xFEED
@@ -33,34 +33,15 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_ROWS 14
 #define MATRIX_COLS 6
 
-#define MOUSEKEY_DELAY          100
-#define MOUSEKEY_INTERVAL       20
-#define MOUSEKEY_MAX_SPEED      3
-#define MOUSEKEY_TIME_TO_MAX    10
-
-#define TAPPING_TOGGLE  1
-
-/* define if matrix has ghost */
-//#define MATRIX_HAS_GHOST
-
 /* number of backlight levels */
 #define BACKLIGHT_LEVELS 3
 
+#define LED_BRIGHTNESS_LO       15
+#define LED_BRIGHTNESS_HI       255
+
+
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5
-#define TAPPING_TERM    200
-#define IGNORE_MOD_TAP_INTERRUPT // this makes it possible to do rolling combos (zx) with keys that convert to other keys on hold (z becomes ctrl when you hold it, and when this option isn't enabled, z rapidly followed by x actually sends Ctrl-x. That's bad.)
-
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LCTL) | MOD_BIT(KC_RCTL)) || \
-    keyboard_report->mods == (MOD_BIT(KC_LSFT) | MOD_BIT(KC_RSFT)) \
-)
 
 /*
  * Feature disable options

keyboards/ergodox/ez/ez.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ez.h"
 #include "i2cmaster.h"
 
 bool i2c_initialized = 0;

keyboards/ergodox/ez/matrix.c

@@ -33,7 +33,7 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #include "debug.h"
 #include "util.h"
 #include "matrix.h"
-#include "ergodox_ez.h"
+#include "ez.h"
 #include "i2cmaster.h"
 #ifdef DEBUG_MATRIX_SCAN_RATE
 #include  "timer.h"

keyboards/ergodox/infinity/Makefile

@@ -52,34 +52,26 @@ ARMV = 7
 # Vector table for application
 # 0x00000000-0x00001000 area is occupied by bootlaoder.*/
 # The CORTEX_VTOR... is needed only for MCHCK/Infinity KB
-OPT_DEFS = -DCORTEX_VTOR_INIT=0x00002000
+OPT_DEFS += -DCORTEX_VTOR_INIT=0x00002000
 
 # Build Options
 #   comment out to disable the options.
 #
-BOOTMAGIC_ENABLE ?= yes	# Virtual DIP switch configuration
-## (Note that for BOOTMAGIC on Teensy LC you have to use a custom .ld script.)
-MOUSEKEY_ENABLE ?= yes	# Mouse keys
-EXTRAKEY_ENABLE ?= yes	# Audio control and System control
-CONSOLE_ENABLE ?= yes	# Console for debug
-COMMAND_ENABLE ?= yes    # Commands for debug and configuration
-SLEEP_LED_ENABLE ?= yes  # Breathing sleep LED during USB suspend
-NKRO_ENABLE ?= yes	    # USB Nkey Rollover
 CUSTOM_MATRIX ?= yes # Custom matrix file
 SERIAL_LINK_ENABLE = yes
-VISUALIZER_ENABLE ?= yes
+VISUALIZER_ENABLE ?= no #temporarily disabled to make everything compile
 LCD_ENABLE ?= yes
 LED_ENABLE ?= yes
 LCD_BACKLIGHT_ENABLE ?= yes
 
+ifndef QUANTUM_DIR
+	include ../../../Makefile
+endif
+
 ifdef LCD_ENABLE
-include drivers/gdisp/st7565ergodox/driver.mk
+include $(SUBPROJECT_PATH)/drivers/gdisp/st7565ergodox/driver.mk
 endif
 
 ifdef LED_ENABLE
-include drivers/gdisp/IS31FL3731C/driver.mk
+include $(SUBPROJECT_PATH)/drivers/gdisp/IS31FL3731C/driver.mk
-endif
-
-ifndef QUANTUM_DIR
-	include ../../Makefile
 endif

keyboards/ergodox/infinity/config.h

@@ -15,8 +15,10 @@ You should have received a copy of the GNU General Public License
 along with this program.  If not, see <http://www.gnu.org/licenses/>.
 */
 
-#ifndef CONFIG_H
+#ifndef INFINITY_ERGODOX_CONFIG_H
-#define CONFIG_H
+#define INFINITY_ERGODOX_CONFIG_H
+
+#include "../config.h"
 
 
 /* USB Device descriptor parameter */
@@ -35,25 +37,18 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 #define MATRIX_COLS 5
 #define LOCAL_MATRIX_ROWS 9
 
+/* number of backlight levels */
+#define BACKLIGHT_LEVELS 3
+
+#define LED_BRIGHTNESS_LO       15
+#define LED_BRIGHTNESS_HI       255
+
 /* define if matrix has ghost */
 //#define MATRIX_HAS_GHOST
 
 /* Set 0 if debouncing isn't needed */
 #define DEBOUNCE    5
 
-/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
-//#define LOCKING_SUPPORT_ENABLE
-/* Locking resynchronize hack */
-//#define LOCKING_RESYNC_ENABLE
-
-/* key combination for command */
-#define IS_COMMAND() ( \
-    keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
-)
-
-/* Keymap for Infiity prototype */
-#define INFINITY_PROTOTYPE
-
 #define SERIAL_LINK_BAUD 562500
 #define SERIAL_LINK_THREAD_PRIORITY (NORMALPRIO - 1)
 // The visualizer needs gfx thread priorities

keyboards/ergodox/infinity/infinity.c

@@ -1,8 +1,10 @@
-#include "infinity_ergodox.h"
+#include "infinity.h"
 #include "ch.h"
 #include "hal.h"
 #include "serial_link/system/serial_link.h"
+#ifdef VISUALIZER_ENABLE
 #include "lcd_backlight.h"
+#endif
 
 void init_serial_link_hal(void) {
     PORTA->PCR[1] = PORTx_PCRn_PE | PORTx_PCRn_PS | PORTx_PCRn_PFE | PORTx_PCRn_MUX(2);
@@ -36,7 +38,7 @@ void init_serial_link_hal(void) {
 // Using a higher pre-scalar without flicker is possible but FTM0_MOD will need to be reduced
 // Which will reduce the brightness range
 #define PRESCALAR_DEFINE 0
-
+#ifdef VISUALIZER_ENABLE
 void lcd_backlight_hal_init(void) {
 	// Setup Backlight
     SIM->SCGC6 |= SIM_SCGC6_FTM0;
@@ -74,3 +76,57 @@ void lcd_backlight_hal_color(uint16_t r, uint16_t g, uint16_t b) {
 	CHANNEL_GREEN.CnV = g;
 	CHANNEL_BLUE.CnV = b;
 }
+#endif
+
+__attribute__ ((weak))
+void matrix_init_user(void) {
+}
+
+__attribute__ ((weak))
+void matrix_scan_user(void) {
+}
+
+
+void matrix_init_kb(void) {
+	// put your keyboard start-up code here
+	// runs once when the firmware starts up
+
+	matrix_init_user();
+}
+
+void matrix_scan_kb(void) {
+	// put your looping keyboard code here
+	// runs every cycle (a lot)
+
+	matrix_scan_user();
+}
+
+void ergodox_board_led_on(void){
+}
+
+void ergodox_right_led_1_on(void){
+}
+
+void ergodox_right_led_2_on(void){
+}
+
+void ergodox_right_led_3_on(void){
+}
+
+void ergodox_right_led_on(uint8_t led){
+}
+
+void ergodox_board_led_off(void){
+}
+
+void ergodox_right_led_1_off(void){
+}
+
+void ergodox_right_led_2_off(void){
+}
+
+void ergodox_right_led_3_off(void){
+}
+
+void ergodox_right_led_off(uint8_t led){
+}

keyboards/ergodox/infinity/infinity.h

@@ -0,0 +1,110 @@
+#ifndef KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_
+#define KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_
+
+#include "quantum.h"
+
+void ergodox_board_led_on(void);
+void ergodox_right_led_1_on(void);
+void ergodox_right_led_2_on(void);
+void ergodox_right_led_3_on(void);
+void ergodox_right_led_on(uint8_t led);
+
+void ergodox_board_led_off(void);
+void ergodox_right_led_1_off(void);
+void ergodox_right_led_2_off(void);
+void ergodox_right_led_3_off(void);
+void ergodox_right_led_off(uint8_t led);
+
+inline void ergodox_led_all_on(void)
+{
+    ergodox_board_led_on();
+    ergodox_right_led_1_on();
+    ergodox_right_led_2_on();
+    ergodox_right_led_3_on();
+}
+
+inline void ergodox_led_all_off(void)
+{
+    ergodox_board_led_off();
+    ergodox_right_led_1_off();
+    ergodox_right_led_2_off();
+    ergodox_right_led_3_off();
+}
+
+inline void ergodox_right_led_1_set(uint8_t n){
+	if (n) {
+		ergodox_right_led_1_on();
+	} else {
+		ergodox_right_led_1_off();
+	}
+}
+
+inline void ergodox_right_led_2_set(uint8_t n){
+	if (n) {
+		ergodox_right_led_2_on();
+	} else {
+		ergodox_right_led_2_off();
+	}
+}
+
+inline void ergodox_right_led_3_set(uint8_t n){
+	if (n) {
+		ergodox_right_led_3_on();
+	} else {
+		ergodox_right_led_3_off();
+	}
+}
+
+inline void ergodox_right_led_set(uint8_t led, uint8_t n){
+	if (n) {
+		ergodox_right_led_on(led);
+	} else {
+		ergodox_right_led_off(led);
+	}
+}
+
+inline void ergodox_led_all_set(uint8_t n) {
+    ergodox_right_led_1_set(n);
+    ergodox_right_led_2_set(n);
+    ergodox_right_led_3_set(n);
+}
+
+#define KEYMAP( \
+    A80, A70, A60, A50, A40, A30, A20,  \
+    A81, A71, A61, A51, A41, A31, A21,  \
+    A82, A72, A62, A52, A42, A32,       \
+    A83, A73, A63, A53, A43, A33, A23,  \
+    A84, A74, A64, A54, A44,            \
+                                  A13, A03, \
+                                       A04, \
+                             A34, A24, A14, \
+         B20, B30, B40, B50, B60, B70, B80, \
+         B21, B31, B41, B51, B61, B71, B81, \
+              B32, B42, B52, B62, B72, B82, \
+         B23, B33, B43, B53, B63, B73, B83, \
+                   B44, B54, B64, B74, B84, \
+    B03, B13,     \
+    B04,          \
+    B14, B24, B34 \
+) { \
+    { KC_NO, KC_NO, KC_NO, A03,   A04 }, \
+    { KC_NO, KC_NO, KC_NO, A13,   A14 }, \
+    { A20,   A21,   KC_NO, A23,   A24 }, \
+    { A30,   A31,   A32,   A33,   A34 }, \
+    { A40,   A41,   A42,   A43,   A44 }, \
+    { A50,   A51,   A52,   A53,   A54 }, \
+    { A60,   A61,   A62,   A63,   A64 }, \
+    { A70,   A71,   A72,   A73,   A74 }, \
+    { A80,   A81,   A82,   A83,   A84 }, \
+    { KC_NO, KC_NO, KC_NO, B03,   B04 }, \
+    { KC_NO, KC_NO, KC_NO, B13,   B14 }, \
+    { B20,   B21,   KC_NO, B23,   B24 }, \
+    { B30,   B31,   B32,   B33,   B34 }, \
+    { B40,   B41,   B42,   B43,   B44 }, \
+    { B50,   B51,   B52,   B53,   B54 }, \
+    { B60,   B61,   B62,   B63,   B64 }, \
+    { B70,   B71,   B72,   B73,   B74 }, \
+    { B80,   B81,   B82,   B83,   B84 }  \
+}
+
+#endif /* KEYBOARDS_ERGODOX_INFINITY_INFINITY_H_ */

keyboards/ergodox/infinity/matrix.c

@@ -63,6 +63,8 @@ void matrix_init(void)
 
     memset(matrix, 0, MATRIX_ROWS);
     memset(matrix_debouncing, 0, LOCAL_MATRIX_ROWS);
+
+    matrix_init_quantum();
 }
 
 uint8_t matrix_scan(void)
@@ -127,6 +129,7 @@ uint8_t matrix_scan(void)
         }
         debouncing = false;
     }
+    matrix_scan_quantum();
     return 1;
 }
 

keyboards/ergodox/keymaps/ab/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 

keyboards/ergodox/keymaps/adnw_k_o_y/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 #include "keymap_german.h"

keyboards/ergodox/keymaps/alexjj/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 

keyboards/ergodox/keymaps/algernon/Makefile

@@ -4,13 +4,19 @@ SLEEP_LED_ENABLE=no
 UNICODE_ENABLE=no
 FORCE_NKRO ?= yes
 DEBUG_ENABLE = no
-CONSOLE_ENABLE = yes
+CONSOLE_ENABLE = no
 TAP_DANCE_ENABLE = yes
+KEYLOGGER_ENABLE ?= yes
 
 ifeq (${FORCE_NKRO},yes)
 OPT_DEFS += -DFORCE_NKRO
 endif
 
+ifeq (${KEYLOGGER_ENABLE},yes)
+OPT_DEFS += -DKEYLOGGER_ENABLE
+CONSOLE_ENABLE = yes
+endif
+
 KEYMAP_VERSION = $(shell \
  if [ -d "${KEYMAP_PATH}/.git" ]; then \
   cd "${KEYMAP_PATH}" && git describe --abbrev=6 --dirty --always --tags --match 'v*' 2>/dev/null; \

keyboards/ergodox/keymaps/algernon/keymap.c

@@ -2,7 +2,7 @@
  * algernon's ErgoDox EZ layout, please see the readme.md file!
  */
 
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "led.h"
 #include "debug.h"
 #include "action_layer.h"
@@ -11,6 +11,7 @@
 #include "timer.h"
 #include "keymap_plover.h"
 #include "eeconfig.h"
+#include "wait.h"
 
 /* Layers */
 
@@ -95,7 +96,9 @@ enum {
 /* Custom keycodes */
 
 enum {
-  CT_CLN = 0
+  CT_CLN = 0,
+  CT_MNS,
+  CT_TA,
 };
 
 /* States & timers */
@@ -115,7 +118,11 @@ uint16_t oh_left_blink_timer = 0;
 uint8_t oh_right_blink = 0;
 uint16_t oh_right_blink_timer = 0;
 
+#if KEYLOGGER_ENABLE
 bool log_enable = false;
+#endif
+
+bool time_travel = false;
 
 /* The Keymap */
 
@@ -146,7 +153,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 // left hand
  KC_GRV             ,M(KF_1)     ,M(KF_2)     ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR)
 ,M(A_MPN)           ,KC_QUOT     ,KC_COMM     ,KC_DOT ,KC_P   ,KC_Y   ,KC_LBRC
-,LT(ARRW,KC_TAB)    ,KC_A        ,KC_O        ,KC_E   ,KC_U   ,KC_I
+,TD(CT_TA)          ,KC_A        ,KC_O        ,KC_E   ,KC_U   ,KC_I
 ,KC_MPLY            ,KC_SLSH     ,KC_Q        ,KC_J   ,KC_K   ,KC_X   ,KC_LPRN
 ,KC_NO              ,KC_NO       ,KC_NO       ,KC_NO  ,TD(CT_CLN)
 
@@ -157,9 +164,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                                 // right hand
                                                                ,KC_APP    ,M(KF_6),M(KF_7)   ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11
                                                                ,KC_RBRC   ,KC_F   ,KC_G      ,KC_C   ,KC_R    ,KC_L     ,KC_BSLS
-                                                                          ,KC_D   ,KC_H   ,KC_T   ,KC_N    ,KC_S     ,LT(ARRW, KC_EQL)
+                                                                          ,KC_D   ,KC_H      ,KC_T   ,KC_N    ,KC_S     ,KC_EQL
                                                                ,KC_RPRN   ,KC_B   ,KC_M      ,KC_W   ,KC_V    ,KC_Z     ,KC_MSTP
-                                                                                  ,KC_MINS,KC_NO  ,KC_NO   ,KC_NO    ,KC_NO
+                                                                                  ,TD(CT_MNS),KC_NO  ,KC_NO   ,KC_NO    ,KC_NO
 
                                                                ,OSL(NMDIA),M(OH_LEFT)
                                                                ,KC_LEAD
@@ -191,7 +198,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
 // left hand
  KC_GRV             ,M(KF_1)     ,M(KF_2)     ,M(KF_3),M(KF_4),M(KF_5),M(A_PLVR)
 ,M(A_MPN)           ,KC_COMM     ,KC_DOT      ,KC_L   ,KC_W   ,KC_M   ,KC_LBRC
-,LT(ARRW, KC_TAB)   ,KC_A        ,KC_O        ,KC_E   ,KC_I   ,KC_U
+,TD(CT_TA)          ,KC_A        ,KC_O        ,KC_E   ,KC_I   ,KC_U
 ,KC_MPLY            ,KC_SLSH     ,KC_Z        ,KC_QUOT,KC_K   ,KC_X   ,KC_LPRN
 ,KC_NO              ,KC_NO       ,KC_NO       ,KC_NO  ,TD(CT_CLN)
 
@@ -202,9 +209,9 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                                 // right hand
                                                                ,KC_APP    ,M(KF_6),M(KF_7)   ,M(KF_8),M(KF_9) ,M(KF_10) ,KC_F11
                                                                ,KC_RBRC   ,KC_F   ,KC_H      ,KC_C   ,KC_P    ,KC_Y     ,KC_BSLS
-                                                                          ,KC_D   ,KC_R   ,KC_T   ,KC_N    ,KC_S     ,LT(ARRW, KC_EQL)
+                                                                          ,KC_D   ,KC_R      ,KC_T   ,KC_N    ,KC_S     ,KC_EQL
                                                                ,KC_RPRN   ,KC_B   ,KC_G      ,KC_V   ,KC_J    ,KC_Q     ,KC_MSTP
-                                                                                  ,KC_MINS,KC_NO  ,KC_NO   ,KC_NO    ,KC_NO
+                                                                                  ,TD(CT_MNS),KC_NO  ,KC_NO   ,KC_NO    ,KC_NO
 
                                                                ,OSL(NMDIA),M(OH_LEFT)
                                                                ,KC_LEAD
@@ -852,12 +859,12 @@ void matrix_init_user(void) {
   ergodox_led_all_on();
   for (int i = LED_BRIGHTNESS_HI; i > LED_BRIGHTNESS_LO; i--) {
     ergodox_led_all_set (i);
-    _delay_ms (5);
+    wait_ms (5);
   }
-  _delay_ms(1000);
+  wait_ms(1000);
   for (int i = LED_BRIGHTNESS_LO; i > 0; i--) {
     ergodox_led_all_set (i);
-    _delay_ms (10);
+    wait_ms (10);
   }
   ergodox_led_all_off();
 
@@ -877,14 +884,14 @@ void ang_do_unicode (void) {
   unregister_code (KC_U);
   unregister_code (KC_RSFT);
   unregister_code (KC_RCTL);
-  _delay_ms (100);
+  wait_ms (100);
 }
 
 void ang_tap (uint16_t codes[]) {
   for (int i = 0; codes[i] != 0; i++) {
     register_code (codes[i]);
     unregister_code (codes[i]);
-    _delay_ms (50);
+    wait_ms (50);
   }
 }
 
@@ -892,24 +899,92 @@ void ang_tap (uint16_t codes[]) {
   register_code (code); \
   unregister_code (code)
 
-void ang_tap_dance (qk_tap_dance_state_t *state) {
+void ang_tap_dance_cln_finished (qk_tap_dance_state_t *state, void *user_data) {
-  switch (state->keycode) {
-  case TD(CT_CLN):
   if (state->count == 1) {
     register_code (KC_RSFT);
     register_code (KC_SCLN);
-      unregister_code (KC_SCLN);
-      unregister_code (KC_RSFT);
   } else if (state->count == 2) {
     register_code (KC_SCLN);
-      unregister_code (KC_SCLN);
-      reset_tap_dance (state);
-    }
   }
 }
 
+void ang_tap_dance_cln_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    unregister_code (KC_SCLN);
+    unregister_code (KC_RSFT);
+  } else if (state->count == 2) {
+    unregister_code (KC_SCLN);
+  }
+}
+
+void ang_tap_dance_mns_finished (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    register_code (KC_MINS);
+  } else if (state->count == 2) {
+    register_code (KC_RSFT);
+    register_code (KC_MINS);
+  }
+}
+
+void ang_tap_dance_mns_reset (qk_tap_dance_state_t *state, void *user_data) {
+  if (state->count == 1) {
+    unregister_code (KC_MINS);
+  } else if (state->count == 2) {
+    unregister_code (KC_RSFT);
+    unregister_code (KC_MINS);
+  }
+}
+
+typedef struct {
+  bool layer_toggle;
+  bool sticky;
+  bool finished_once;
+} td_ta_state_t;
+
+void ang_tap_dance_ta_finished (qk_tap_dance_state_t *state, void *user_data) {
+  td_ta_state_t *td_ta = (td_ta_state_t *) user_data;
+
+  if (td_ta->finished_once) {
+    return;
+  }
+
+  if (td_ta->sticky) {
+    td_ta->sticky = false;
+    td_ta->layer_toggle = false;
+    layer_off (ARRW);
+    return;
+  }
+
+  td_ta->finished_once = true;
+  if (state->count == 1 && !state->pressed) {
+    register_code (KC_TAB);
+    td_ta->sticky = false;
+    td_ta->layer_toggle = false;
+  } else {
+    td_ta->layer_toggle = true;
+    layer_on (ARRW);
+    td_ta->sticky = (state->count == 2);
+  }
+}
+
+void ang_tap_dance_ta_reset (qk_tap_dance_state_t *state, void *user_data) {
+  td_ta_state_t *td_ta = (td_ta_state_t *) user_data;
+
+  if (!td_ta->layer_toggle)
+    unregister_code (KC_TAB);
+  if (!td_ta->sticky)
+    layer_off (ARRW);
+
+  td_ta->finished_once = false;
+}
+
 const qk_tap_dance_action_t tap_dance_actions[] = {
-  [CT_CLN] = ACTION_TAP_DANCE_FN (ang_tap_dance)
+   [CT_CLN] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_cln_finished, ang_tap_dance_cln_reset)
+  ,[CT_MNS] = ACTION_TAP_DANCE_FN_ADVANCED (NULL, ang_tap_dance_mns_finished, ang_tap_dance_mns_reset)
+  ,[CT_TA]  = {
+     .fn = { NULL, ang_tap_dance_ta_finished, ang_tap_dance_ta_reset },
+     .user_data = (void *)&((td_ta_state_t) { false, false, false })
+   }
 };
 
 // Runs constantly in the background, in a loop.
@@ -1002,9 +1077,18 @@ void matrix_scan_user(void) {
     leading = false;
     leader_end ();
 
+#if KEYLOGGER_ENABLE
     SEQ_ONE_KEY (KC_D) {
+      ergodox_led_all_on();
+      wait_ms(100);
+      ergodox_led_all_off();
       log_enable = !log_enable;
     }
+#endif
+
+    SEQ_ONE_KEY (KC_T) {
+      time_travel = !time_travel;
+    }
 
     SEQ_ONE_KEY (KC_U) {
       ang_do_unicode ();
@@ -1043,7 +1127,7 @@ void matrix_scan_user(void) {
       unregister_code (KC_F2);
       unregister_code (KC_LALT);
 
-      _delay_ms (1000);
+      wait_ms (1000);
 
       uint16_t codes[] = {KC_M, KC_A, KC_X, KC_MINS, KC_F, KC_O, KC_C, KC_U, KC_S, KC_E, KC_D, KC_ENT, 0};
       ang_tap (codes);
@@ -1062,14 +1146,14 @@ void matrix_scan_user(void) {
 
         ergodox_led_all_off ();
         ergodox_right_led_3_on ();
-        _delay_ms (100);
+        wait_ms (100);
         ergodox_right_led_2_on ();
-        _delay_ms (100);
+        wait_ms (100);
         ergodox_right_led_3_off ();
         ergodox_right_led_1_on ();
-        _delay_ms (100);
+        wait_ms (100);
         ergodox_right_led_2_off ();
-        _delay_ms (100);
+        wait_ms (100);
         ergodox_right_led_1_off ();
       } else {
         is_adore = 0;
@@ -1079,27 +1163,55 @@ void matrix_scan_user(void) {
 
         ergodox_led_all_off ();
         ergodox_right_led_1_on ();
-        _delay_ms (100);
+        wait_ms (100);
         ergodox_right_led_2_on ();
-        _delay_ms (100);
+        wait_ms (100);
         ergodox_right_led_1_off ();
         ergodox_right_led_3_on ();
-        _delay_ms (100);
+        wait_ms (100);
         ergodox_right_led_2_off ();
-        _delay_ms (100);
+        wait_ms (100);
         ergodox_right_led_3_off ();
       }
     }
   }
 }
 
+static uint16_t last4[4];
+
 bool process_record_user (uint16_t keycode, keyrecord_t *record) {
+#if KEYLOGGER_ENABLE
   uint8_t layer = biton32(layer_state);
 
   if (log_enable && layer == BASE) {
     xprintf ("KL: col=%d, row=%d\n", record->event.key.col,
              record->event.key.row);
   }
+#endif
+
+  if (time_travel && !record->event.pressed) {
+    uint8_t p;
+
+    // shift cache one to the left
+    for (p = 0; p < 3; p++) {
+      last4[p] = last4[p + 1];
+    }
+    last4[3] = keycode;
+
+    if (last4[0] == KC_D && last4[1] == KC_A && last4[2] == KC_T && last4[3] == KC_E) {
+      uint16_t codes[] = {KC_E, KC_SPC, KC_MINS, KC_D, KC_SPC, KC_QUOT, 0};
+      ang_tap (codes);
+      register_code (KC_RSFT);
+      register_code (KC_EQL);
+      unregister_code (KC_EQL);
+      unregister_code (KC_RSFT);
+
+      uint16_t codes2[] = {KC_4, KC_SPC, KC_D, KC_A, KC_Y, KC_S, KC_QUOT, 0};
+      ang_tap (codes2);
+
+      return false;
+    }
+  }
 
   return true;
 }

keyboards/ergodox/keymaps/algernon/readme.md

@@ -50,6 +50,7 @@ At its core, this is a Dvorak layout, with some minor changes. The more interest
     - `LEAD a` makes the [ADORE layer](#adore-layer) the default.
     - `LEAD v` prints the firmware version, the keyboard and the keymap.
     - `LEAD d` toggles logging keypress positions to the HID console.
+    - `LEAD t` toggles time travel. Figuring out the current `date` is left as an exercise to the reader.
 
 ## ADORE layer
 
@@ -148,6 +149,14 @@ The keymap default to forcing NKRO, which seems to upset Windows, and except the
 
 # Changelog
 
+## v1.4 - 2016-07-29
+
+* When toggling the key logging on or off, the LEDs will do a little dance.
+* The keylogger is now optional, but enabled by default. Use `KEYLOGGER_ENABLE=no` on the `make` command line to disable it.
+* The `TAB`/`ARRW` key was turned into a tap-dance key, allowing one to toggle the **ARROW** layer on by double-tapping, and as such, avoid the need to hold the key.
+* The `-`/`_` key was turned into a tap-dance key too.
+* There is now a way to travel time with the keyboard, toggle the feature on by hitting `LEAD t`.
+
 ## v1.3 - 2016-07-06
 
 * Added support for logging keys, by pressing `LEAD d`. Also included is a tool to generate a [heatmap](#heatmap) out of the logs.

keyboards/ergodox/keymaps/algernon/tools/heatmap-adore-layout.json

@@ -0,0 +1,533 @@
+[
+  {
+    "backcolor": "#ffffff",
+    "name": "ErgoDox - algernon's layout: Heatmap",
+    "author": "Gergely Nagy <kbd@gergo.csillger.hu>",
+    "notes": "See [here](https://github.com/algernon/ergodox-layout#readme) for the QMK keymap source.",
+    "switchMount": "cherry",
+    "switchBrand": "gateron",
+    "switchType": "KS-3-Tea",
+    "pcb": true,
+    "css": ".keyborder { -webkit-filter: blur(5px); filter: blur(5px); } .keytop { -webkit-filter: blur(10px); } .keylabels { border: 1px solid black; }"
+  },
+  [
+    {
+      "x": 3.5,
+      "c": "#a7d0db",
+      "fa": [
+        0,
+        0,
+        2
+      ]
+    },
+    "#\n3\nF3",
+    {
+      "x": 10.5,
+      "c": "#a7d0db",
+      "t": "#000000",
+      "a": 4,
+      "fa": [
+        0,
+        0,
+        2
+      ]
+    },
+    "*\n8\nF8"
+  ],
+  [
+    {
+      "y": -0.875,
+      "x": 2.5,
+      "c": "#bfbad1",
+      "t": "#0d0d0b"
+    },
+    "@\n2\nF2",
+    {
+      "x": 1,
+      "c": "#7adabd",
+      "t": "#000000"
+    },
+    "$\n4\nF4",
+    {
+      "x": 8.5
+    },
+    "&\n7\nF7",
+    {
+      "x": 1,
+      "c": "#bfbad1",
+      "t": "#0d0d0b"
+    },
+    "(\n9\nF9"
+  ],
+  [
+    {
+      "y": -0.875,
+      "x": 5.5,
+      "c": "#7adabd",
+      "t": "#000000"
+    },
+    "%\n5\nF5",
+    {
+      "c": "#f9cd31",
+      "a": 7,
+      "f": 2
+    },
+    "STENO",
+    {
+      "x": 4.5,
+      "f": 6
+    },
+    "<i class='mss mss-Unicode-Option-3'></i>",
+    {
+      "c": "#7adabd",
+      "a": 4,
+      "f": 3,
+      "fa": [
+        0,
+        0,
+        2
+      ]
+    },
+    "^\n6\nF6"
+  ],
+  [
+    {
+      "y": -0.875,
+      "c": "#ffb2d2",
+      "f": 3,
+      "w": 1.5
+    },
+    "\n\n~\n`",
+    {
+      "t": "#0d0d0b"
+    },
+    "!\n1\nF1",
+    {
+      "x": 14.5
+    },
+    ")\n0\nF10",
+    {
+      "a": 7,
+      "w": 1.5
+    },
+    "F11"
+  ],
+  [
+    {
+      "y": -0.375,
+      "x": 3.5,
+      "c": "#a7d0db",
+      "t": "#000000",
+      "a": 6
+    },
+    "L",
+    {
+      "x": 10.5
+    },
+    "C"
+  ],
+  [
+    {
+      "y": -0.875,
+      "x": 2.5,
+      "c": "#bfbad1",
+      "t": "#0d0d0b",
+      "a": 4
+    },
+    ">\n.",
+    {
+      "x": 1,
+      "c": "#7adabd",
+      "t": "#000000",
+      "a": 6
+    },
+    "W",
+    {
+      "x": 8.5
+    },
+    "H",
+    {
+      "x": 1,
+      "c": "#bfbad1",
+      "t": "#0d0d0b"
+    },
+    "P"
+  ],
+  [
+    {
+      "y": -0.875,
+      "x": 5.5,
+      "c": "#7adabd",
+      "t": "#000000"
+    },
+    "M",
+    {
+      "c": "#93c9b7",
+      "a": 4,
+      "h": 1.5
+    },
+    "{\n[",
+    {
+      "x": 4.5,
+      "h": 1.5
+    },
+    "}\n]",
+    {
+      "c": "#7adabd",
+      "a": 6
+    },
+    "F"
+  ],
+  [
+    {
+      "y": -0.875,
+      "c": "#ffb07b",
+      "t": "#0d0d0b",
+      "f": 6,
+      "w": 1.5
+    },
+    "<i class='fa fa-fast-backward'></i>\n\n<i class='fa fa-fast-forward'></i>",
+    {
+      "c": "#ffb2d2",
+      "a": 4,
+      "f": 3
+    },
+    "<\n,",
+    {
+      "x": 14.5,
+      "a": 6
+    },
+    "Y",
+    {
+      "a": 4,
+      "w": 1.5
+    },
+    "|\n\\"
+  ],
+  [
+    {
+      "y": -0.375,
+      "x": 3.5,
+      "c": "#a7d0db",
+      "t": "#000000",
+      "a": 6
+    },
+    "E",
+    {
+      "x": 10.5
+    },
+    "T"
+  ],
+  [
+    {
+      "y": -0.875,
+      "x": 2.5,
+      "c": "#bfbad1",
+      "t": "#0d0d0b"
+    },
+    "O",
+    {
+      "x": 1,
+      "c": "#7adabd",
+      "t": "#000000",
+      "n": true
+    },
+    "I",
+    {
+      "x": 8.5,
+      "n": true
+    },
+    "R",
+    {
+      "x": 1,
+      "c": "#bfbad1",
+      "t": "#0d0d0b"
+    },
+    "N"
+  ],
+  [
+    {
+      "y": -0.875,
+      "x": 5.5,
+      "c": "#7adabd",
+      "t": "#000000"
+    },
+    "U",
+    {
+      "x": 6.5
+    },
+    "D"
+  ],
+  [
+    {
+      "y": -0.875,
+      "c": "#ffb2d2",
+      "t": "#0d0d0b",
+      "fa": [
+        6
+      ],
+      "w": 1.5
+    },
+    "<i class='fa fa-arrows'></i>\n\nTab",
+    {
+      "f": 3
+    },
+    "A",
+    {
+      "x": 14.5,
+      "f": 3
+    },
+    "S",
+    {
+      "a": 4,
+      "fa": [
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        0,
+        6
+      ],
+      "w": 1.5
+    },
+    "+\n="
+  ],
+  [
+    {
+      "y": -0.625,
+      "x": 6.5,
+      "c": "#93c9b7",
+      "t": "#000000",
+      "a": 7,
+      "h": 1.5
+    },
+    "(",
+    {
+      "x": 4.5,
+      "h": 1.5
+    },
+    ")"
+  ],
+  [
+    {
+      "y": -0.75,
+      "x": 3.5,
+      "c": "#a7d0db",
+      "a": 4,
+      "f": 3
+    },
+    "\"\n'",
+    {
+      "x": 10.5
+    },
+    "V"
+  ],
+  [
+    {
+      "y": -0.875,
+      "x": 2.5,
+      "c": "#bfbad1",
+      "t": "#0d0d0b"
+    },
+    "Z",
+    {
+      "x": 1,
+      "c": "#7adabd",
+      "t": "#000000"
+    },
+    "K",
+    {
+      "x": 8.5
+    },
+    "G",
+    {
+      "x": 1,
+      "c": "#bfbad1",
+      "t": "#0d0d0b"
+    },
+    "J"
+  ],
+  [
+    {
+      "y": -0.875,
+      "x": 5.5,
+      "c": "#7adabd",
+      "t": "#000000"
+    },
+    "X",
+    {
+      "x": 6.5
+    },
+    "B"
+  ],
+  [
+    {
+      "y": -0.875,
+      "c": "#ffb07b",
+      "f": 9,
+      "w": 1.5
+    },
+    "\n\n<i class='kb kb-Multimedia-Play-Pause'></i>",
+    {
+      "c": "#ffb2d2",
+      "t": "#0d0d0b",
+      "a": 4,
+      "f": 3
+    },
+    "?\n/",
+    {
+      "x": 14.5,
+      "a": 6
+    },
+    "Q",
+    {
+      "c": "#ffb07b",
+      "t": "#000000",
+      "f": 9,
+      "w": 1.5
+    },
+    "<i class='kb kb-Multimedia-Stop'></i>"
+  ],
+  [
+    {
+      "y": -0.375,
+      "x": 3.5,
+      "c": "#d9dae0",
+      "g": true,
+      "a": 7,
+      "f": 3
+    },
+    "",
+    {
+      "x": 10.5
+    },
+    ""
+  ],
+  [
+    {
+      "y": -0.875,
+      "x": 2.5
+    },
+    "",
+    {
+      "x": 1,
+      "c": "#d4872a",
+      "g": false,
+      "a": 5
+    },
+    ";\n:",
+    {
+      "x": 8.5
+    },
+    "_\n-",
+    {
+      "x": 1,
+      "c": "#d9dae0",
+      "g": true,
+      "a": 7
+    },
+    ""
+  ],
+  [
+    {
+      "y": -0.75,
+      "x": 0.5
+    },
+    "",
+    {},
+    "",
+    {
+      "x": 14.5
+    },
+    "",
+    {},
+    ""
+  ],
+  [
+    {
+      "r": 30,
+      "rx": 6.5,
+      "ry": 4.25,
+      "y": -1,
+      "x": 1,
+      "c": "#f9cd31",
+      "g": false
+    },
+    "Alt",
+    {
+      "a": 4,
+      "fa": [
+        0,
+        0,
+        0,
+        9
+      ]
+    },
+    "\n\n\n<i class='kb kb-logo-linux-debian fa-large'></i>"
+  ],
+  [
+    {
+      "c": "#d4872a",
+      "a": 7,
+      "f": 9,
+      "h": 2
+    },
+    "<i class='kb kb-Unicode-BackSpace-DeleteLeft-Big'></i>",
+    {
+      "h": 2
+    },
+    "<i class='fa fa-angle-double-up'></i>",
+    {
+      "c": "#f9cd31",
+      "f": 3
+    },
+    "Ctrl"
+  ],
+  [
+    {
+      "x": 2,
+      "c": "#e26757"
+    },
+    "ESC"
+  ],
+  [
+    {
+      "r": -30,
+      "rx": 13,
+      "y": -1,
+      "x": -3,
+      "c": "#f9cd31",
+      "f": 2
+    },
+    "MEDIA",
+    {},
+    "1HAND"
+  ],
+  [
+    {
+      "x": -3
+    },
+    "LEAD",
+    {
+      "c": "#d4872a",
+      "f": 9,
+      "h": 2
+    },
+    "<i class='kb kb-Return-2'></i>",
+    {
+      "f": 3,
+      "h": 2
+    },
+    "SPC"
+  ],
+  [
+    {
+      "x": -3,
+      "c": "#f9cd31",
+      "f": 2
+    },
+    "HUN"
+  ]
+]

keyboards/ergodox/keymaps/andrew_osx/keymap.c

@@ -1,7 +1,7 @@
 // Netable differences vs. the default firmware for the ErgoDox EZ:
 // 1. The Cmd key is now on the right side, making Cmd+Space easier.
 // 2. The media keys work on OSX (But not on Windows).
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 

keyboards/ergodox/keymaps/bepo/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 #include "keymap_bepo.h"

keyboards/ergodox/keymaps/coderkun_neo2/Makefile

@@ -0,0 +1,2 @@
+SLEEP_LED_ENABLE = no
+UNICODE_ENABLE = yes

keyboards/ergodox/keymaps/coderkun_neo2/keymap.c

@@ -1,7 +1,8 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
-#include "keymap_neo2.h"
+#include "led.h"
+#include "keymap_extras/keymap_neo2.h"
 
 // Layer names
 #define BASE 0      // default layer
@@ -33,7 +34,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  */
 [BASE] = KEYMAP(
         // left hand
-        KC_TAB,     KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   KC_EQL,
+        KC_TAB,     KC_1,   KC_2,   KC_3,   KC_4,   KC_5,   NEO_GRV,
         NEO_Y,      NEO_X,  NEO_V,  NEO_L,  NEO_C,  NEO_W,  KC_HOME,
         NEO_L1_L,   NEO_U,  NEO_I,  NEO_A,  NEO_E,  NEO_O,
         KC_LSFT,    NEO_UE, NEO_OE, NEO_AE, NEO_P,  NEO_Z,  TG(PMQ),
@@ -42,7 +43,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
                                                                 KC_MINS,
                                             KC_SPC, KC_ENT,    ALL_T(KC_NO),
         // right hand
-        DE_ACUT,    KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_BSPC,
+        NEO_ACUT,   KC_6,   KC_7,   KC_8,   KC_9,   KC_0,   KC_BSPC,
         KC_END,     NEO_K,  NEO_H,  NEO_G,  NEO_F,  NEO_Q,  NEO_SS,
                     NEO_S,  NEO_N,  NEO_R,  NEO_T,  NEO_D,  NEO_L1_R,
         TG(PMN),    NEO_B,  NEO_M,  KC_COMM,KC_DOT, NEO_J,  KC_RSFT,
@@ -140,10 +141,10 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
  * │       │     │     │     │  ✕  │     │     │     │     │     │ F9  │ F10 │ F11 │ F12 │       │
  * ├───────┼─────┼─────┼─────╆─────╅─────┤     │     │     ├─────╆─────╅─────┼─────┼─────┼───────┤
  * │       │     │     │     │  ✓  │     ├─────┤     ├─────┤     │ F5  │ F6  │ F7  │ F8  │       │
- * ├───────┼─────┼─────┼─────╄─────╃─────┤     │     │     ├─────╄─────╃─────┼─────┼─────┼───────┤
+ * ├───────┼─────┼─────┼─────╄─────╃─────┤(TL2)│     │(TL3)├─────╄─────╃─────┼─────┼─────┼───────┤
  * │       │     │     │     │     │     │     │     │     │     │ F1  │ F2  │ F3  │ F4  │       │
  * └─┬─────┼─────┼─────┼─────┼─────┼─────┴─────┘     └─────┴─────┼─────┼─────┼─────┼─────┼─────┬─┘
- *   │     │     │(MO1)│     │     │                             │     │     │(MO1)│     │     │
+ *   │     │     │(MO1)│     │(MO4)│                             │(MO4)│     │(MO1)│     │     │
  *   └─────┴─────┴─────┴─────┴─────┘ ┌─────┬─────┐ ┌─────┬─────┐ └─────┴─────┴─────┴─────┴─────┘
  *                                   │ Ms← │ Ms↑ │ │ Ms↓ │ Ms→ │
  *                             ┌─────┼─────┼─────┤ ├─────┼─────┼─────┐
@@ -267,7 +268,13 @@ void matrix_scan_user(void)
             ergodox_right_led_3_on();
         break;
         default:
+            if(host_keyboard_leds() & (1<<USB_LED_SCROLL_LOCK)) {
+                ergodox_led_all_set(LED_BRIGHTNESS_HI);
+                ergodox_right_led_1_on();
+            }
+            else {
                 ergodox_board_led_off();
+            }
         break;
     }
 

keyboards/ergodox/keymaps/colemak/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 

keyboards/ergodox/keymaps/colemak_osx_pc_no/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 #include "keymap_norwegian.h"
@@ -39,7 +39,7 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
         NO_COLN,         KC_A,         KC_R,    KC_S,   KC_T,   KC_D,
         KC_EXLM,        KC_Z,         KC_X,    KC_C,   KC_V,   KC_B,   NO_SCLN,
         MO(4),     KC_BTN1,      KC_BTN2, KC_TAB,GUI_T(KC_COMMA),
-                                                      NO_AMP, NO_PIPE,
+                                                      NO_AMPR, NO_PIPE,
                                                               NO_PLUS,
                                                KC_FN1,CTL_T(KC_DOT),ALT_T(NO_MINS),
         // right hand

keyboards/ergodox/keymaps/csharp_dev/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 

keyboards/ergodox/keymaps/dave/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 

keyboards/ergodox/keymaps/default/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 

keyboards/ergodox/keymaps/default_osx/keymap.c

@@ -1,7 +1,7 @@
 // Netable differences vs. the default firmware for the ErgoDox EZ:
 // 1. The Cmd key is now on the right side, making Cmd+Space easier.
 // 2. The media keys work on OSX (But not on Windows).
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 

keyboards/ergodox/keymaps/dragon788/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"
 

keyboards/ergodox/keymaps/dvorak/keymap.c

@@ -1,4 +1,4 @@
-#include "ergodox_ez.h"
+#include "ergodox.h"
 #include "debug.h"
 #include "action_layer.h"