Merge remote-tracking branch 'origin/master' into develop

master
QMK Bot 2021-05-18 19:26:46 +00:00
commit e756586f41
11 changed files with 364 additions and 19 deletions

View File

@ -34,7 +34,7 @@ jobs:
- name: Run qmk cformat and qmk pyformat
shell: 'bash {0}'
run: |
qmk cformat -n $(< ~/files.txt)
qmk cformat --core-only -n $(< ~/files.txt)
cformat_exit=$?
qmk pyformat -n
pyformat_exit=$?

View File

@ -0,0 +1,52 @@
/*
Copyright 2021 Peter C. Park <peter@stenokeyboards.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "config_common.h"
/* USB Device descriptor parameter */
#define VENDOR_ID 0x9000
#define PRODUCT_ID 0x0001
#define DEVICE_VER 0x0001
#define MANUFACTURER stenokeyboards
#define PRODUCT The Uni
/* key matrix size */
#define MATRIX_ROWS 3
#define MATRIX_COLS 11
/* key matrix pins */
#define MATRIX_ROW_PINS { F4, B2, B6 }
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B5, B4, E6, D7, C6, D4 }
#define UNUSED_PINS
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
/* Set 0 if debouncing isn't needed */
#define DEBOUNCE 5
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
#define LOCKING_SUPPORT_ENABLE
/* Locking resynchronize hack */
#define LOCKING_RESYNC_ENABLE
/*force the nkro if it does not work*/
#define FORCE_NKRO

View File

@ -0,0 +1,41 @@
{
"keyboard_name": "The Uni",
"url": "https://www.stenokeyboards.com",
"maintainer": "qmk",
"width": 13,
"height": 4,
"layouts": {
"LAYOUT": {
"layout": [
{ "x": 0, "y": 0 },
{ "x": 1, "y": 0 },
{ "x": 2, "y": 0 },
{ "x": 3, "y": 0 },
{ "x": 4, "y": 0 },
{ "x": 7, "y": 0 },
{ "x": 8, "y": 0 },
{ "x": 9, "y": 0 },
{ "x": 10, "y": 0 },
{ "x": 11, "y": 0 },
{ "x": 12, "y": 0 },
{ "x": 0, "y": 1 },
{ "x": 1, "y": 1 },
{ "x": 2, "y": 1 },
{ "x": 3, "y": 1 },
{ "x": 4, "y": 1 },
{ "x": 7, "y": 1 },
{ "x": 8, "y": 1 },
{ "x": 9, "y": 1 },
{ "x": 10, "y": 1 },
{ "x": 11, "y": 1 },
{ "x": 12, "y": 1 },
{ "x": 2, "y": 3 },
{ "x": 3, "y": 3 },
{ "x": 4, "y": 3 },
{ "x": 7, "y": 3 },
{ "x": 8, "y": 3 },
{ "x": 9, "y": 3 }
]
}
}
}

View File

@ -0,0 +1,77 @@
/*
Copyright 2021 Peter C. Park <peter@stenokeyboards.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
#include "keymap_steno.h"
enum uni_layers {
/*
_QWERTY,
_CHOOSE,
*/
_PLOVER,
};
/*
enum uni_keycodes {
PLOVER,
QWERTY
};
*/
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/*
[_QWERTY] = LAYOUT(
KC_Q, KC_W, KC_E, KC_R, LT(_CHOOSE, KC_T), KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_1, KC_C, KC_V, KC_N, KC_M, KC_2),
[_CHOOSE] = LAYOUT(
_______, _______, _______, _______, _______, PLOVER, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______),
*/
[_PLOVER] = LAYOUT(
STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR ,
STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR ,
STN_N1, STN_A, STN_O, STN_E, STN_U, STN_N2),
};
/*
switch (keycode) {
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
case PLOVER:
if (!record->event.pressed) {
layer_on(_PLOVER);
}
return false;
break;
case QWERTY:
if (!record->event.pressed) {
layer_on(_QWERTY);
}
return false;
break;
}
return true;
}
*/
void matrix_init_user() {
steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT
}

View File

@ -0,0 +1,77 @@
/*
Copyright 2021 Peter C. Park <peter@stenokeyboards.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include QMK_KEYBOARD_H
//#include "keymap_steno.h"
enum uni_layers {
_QWERTY,
/*
_CHOOSE,
_PLOVER,
*/
};
/*
enum uni_keycodes {
PLOVER,
QWERTY
};
*/
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
[_QWERTY] = LAYOUT(
KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC,
KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT,
KC_1, KC_C, KC_V, KC_N, KC_M, KC_2),
/*
[_CHOOSE] = LAYOUT(
_______, _______, _______, _______, _______, PLOVER, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
_______, _______, _______, _______, _______, _______),
[_PLOVER] = LAYOUT(
STN_S1, STN_TL, STN_PL, STN_HL, STN_ST1, STN_ST3, STN_FR, STN_PR, STN_LR, STN_TR, STN_DR ,
STN_S2, STN_KL, STN_WL, STN_RL, STN_ST2, STN_ST4, STN_RR, STN_BR, STN_GR, STN_SR, STN_ZR ,
STN_N1, STN_A, STN_O, STN_E, STN_U, STN_N2),
*/
};
/*
switch (keycode) {
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
case PLOVER:
if (!record->event.pressed) {
layer_on(_PLOVER);
}
return false;
break;
case QWERTY:
if (!record->event.pressed) {
layer_on(_QWERTY);
}
return false;
break;
}
return true;
}
*/
void matrix_init_user() {
//steno_set_mode(STENO_MODE_GEMINI); // or STENO_MODE_BOLT
}

View File

@ -0,0 +1,19 @@
# The Uni
![The Uni](https://raw.githubusercontent.com/petercpark/The_Uni/main/Pics/layout.png)
![The Uni Closeup](https://github.com/petercpark/The_Uni/blob/main/Pics/close-up-uni.jpg?raw=true)
A compact unibody split ortholinear keyboard made specifically for stenography.
- Keyboard Maintainer: [Peter C. Park](https://github.com/petercpark)
- Link to Keyboard Files: [The_Uni](https://github.com/petercpark/The_Uni)
- Hardware Supported: The Uni v1 and v2 (pro micro or equivalent)
- Hardware Availability: [website](https://www.stenokeyboards.com)
Make example for this keyboard (after setting up your build environment):
To enter the bootloader, short the rst and gnd pins with a conductive material such as a tweezer or a wire. Uni v2 will have reset pads next to the pro micro so you can short these pads to reset the pro micro.
make the_uni:default
See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).

View File

@ -0,0 +1,21 @@
# MCU name
MCU = atmega32u4
# Bootloader
BOOTLOADER = atmel-dfu
# Build Options
# comment out to disable the options.
#
BOOTMAGIC_ENABLE = lite # Virtual DIP switch configuration
CONSOLE_ENABLE = no # Console for debug
COMMAND_ENABLE = no # Commands for debug and configuration
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no
FORCE_NKRO = yes
EXTRAKEY_ENABLE = no
MOUSEKEY_ENABLE = no # Mouse keys
STENO_ENABLE = yes

View File

@ -0,0 +1,18 @@
/*
Copyright 2021 Peter C. Park <peter@stenokeyboards.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "the_uni.h"

View File

@ -0,0 +1,30 @@
/*
Copyright 2021 Peter C. Park <peter@stenokeyboards.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#pragma once
#include "quantum.h"
#define LAYOUT( \
K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010, \
K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110, \
K202, K203, K204, K205, K206, K207 \
) { \
{ K000, K001, K002, K003, K004, K005, K006, K007, K008, K009, K010 }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, K109, K110 }, \
{ KC_NO, KC_NO, K202, K203, K204, K205, K206, K207, KC_NO, KC_NO, KC_NO } \
}

View File

@ -43,21 +43,21 @@ KC_TRNS, RGB_SAD, RGB_M_P, RGB_MOD, RGB_SPD,
),
[2] = LAYOUT(
____,
____,
____, ____, ____, ____,
____, ____, ____, ____, ____,
____, ____,
____
_______,
_______,
_______, _______, _______, _______,
_______, _______, _______, _______, _______,
_______, _______,
_______
),
[3] = LAYOUT(
____,
____,
____, ____, ____, ____,
____, ____, ____, ____, ____,
____, ____,
____
_______,
_______,
_______, _______, _______, _______,
_______, _______, _______, _______, _______,
_______, _______,
_______
),
};

View File

@ -65,11 +65,21 @@ def cformat_run(files):
return False
def filter_files(files):
def filter_files(files, core_only=False):
"""Yield only files to be formatted and skip the rest
"""
if core_only:
# Filter non-core files
for index, file in enumerate(files):
# The following statement checks each file to see if the file path is
# - in the core directories
# - not in the ignored directories
if not any(i in str(file) for i in core_dirs) or any(i in str(file) for i in ignored):
files[index] = None
cli.log.debug("Skipping non-core file %s, as '--core-only' is used.", file)
for file in files:
if file.name.split('.')[-1] in c_file_suffixes:
if file and file.name.split('.')[-1] in c_file_suffixes:
yield file
else:
cli.log.debug('Skipping file %s', file)
@ -78,6 +88,7 @@ def filter_files(files):
@cli.argument('-n', '--dry-run', arg_only=True, action='store_true', help="Flag only, don't automatically format.")
@cli.argument('-b', '--base-branch', default='origin/master', help='Branch to compare to diffs to.')
@cli.argument('-a', '--all-files', arg_only=True, action='store_true', help='Format all core files.')
@cli.argument('--core-only', arg_only=True, action='store_true', help='Format core files only.')
@cli.argument('files', nargs='*', arg_only=True, type=normpath, completer=FilesCompleter('.c'), help='Filename(s) to format.')
@cli.subcommand("Format C code according to QMK's style.", hidden=False if cli.config.user.developer else True)
def cformat(cli):
@ -85,7 +96,7 @@ def cformat(cli):
"""
# Find the list of files to format
if cli.args.files:
files = list(filter_files(cli.args.files))
files = list(filter_files(cli.args.files, cli.args.core_only))
if not files:
cli.log.error('No C files in filelist: %s', ', '.join(map(str, cli.args.files)))
@ -96,8 +107,7 @@ def cformat(cli):
elif cli.args.all_files:
all_files = c_source_files(core_dirs)
# The following statement checks each file to see if the file path is in the ignored directories.
files = [file for file in all_files if not any(i in str(file) for i in ignored)]
files = list(filter_files(all_files, True))
else:
git_diff_cmd = ['git', 'diff', '--name-only', cli.args.base_branch, *core_dirs]
@ -117,7 +127,7 @@ def cformat(cli):
# Sanity check
if not files:
cli.log.error('No changed files detected. Use "qmk cformat -a" to format all files')
cli.log.error('No changed files detected. Use "qmk cformat -a" to format all core files')
return False
# Run clang-format on the files we've found