FIX: send last report when idle timeouts. (pjrc)

master
tmk 2011-03-10 00:50:27 +09:00
parent 1a7c3585ed
commit cec2549505
9 changed files with 23 additions and 9 deletions

2
adb.c 100644 → 100755
View File

@ -280,7 +280,6 @@ Pinouts
4: GND
Commands
--------
ADB command is 1byte and consists of 4bit-address, 2bit-command
@ -381,6 +380,7 @@ Keyboard Data(Register0)
You can read the state from PSW line(active low) however
the switch has a special scancode 0x7F7F, so you can
also read from Data line. It uses 0xFFFF for release scancode.
Release code seems to delay about some 100ms. Due to Mac soft power?
Keyboard LEDs & state of keys(Register2)
This register hold current state of three LEDs and nine keys.

2
adb_usb/Makefile 100644 → 100755
View File

@ -44,7 +44,7 @@ USB_EXTRA_ENABLE = yes # Enhanced feature for Windows(Audio control and System c
#---------------- Programming Options --------------------------
PROGRAM_CMD = teensy_loader_cli.exe -mmcu=$(MCU) -w -v $(TARGET).hex
PROGRAM_CMD = teensy_loader_cli -mmcu=$(MCU) -w -v $(TARGET).hex

View File

@ -17,8 +17,8 @@
/* key combination for command */
#define IS_COMMAND() ( \
keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) || \
keyboard_report->mods == (BIT_LCTRL | BIT_RSHIFT) \
keyboard_report->mods == (BIT_LSHIFT | BIT_LCTRL | BIT_LALT | BIT_LGUI) || \
keyboard_report->mods == (BIT_LSHIFT | BIT_RSHIFT) \
)

2
adb_usb/matrix.c 100644 → 100755
View File

@ -87,7 +87,7 @@ uint8_t matrix_scan(void)
_register_key(key1);
}
if (debug_matrix && matrix_is_modified()) {
if (debug_enable) {
print("adb_host_kbd_recv: "); phex16(codes); print("\n");
}
return 1;

5
command.c 100644 → 100755
View File

@ -102,7 +102,10 @@ uint8_t command_proc(void)
print("UDCON: "); phex(UDCON); print("\n");
print("UDIEN: "); phex(UDIEN); print("\n");
print("UDINT: "); phex(UDINT); print("\n");
print("host_keyboard_leds:"); phex(host_keyboard_leds()); print("\n");
print("usb_keyboard_leds:"); phex(usb_keyboard_leds); print("\n");
print("usb_keyboard_protocol: "); phex(usb_keyboard_protocol); print("\n");
print("usb_keyboard_idle_config:"); phex(usb_keyboard_idle_config); print("\n");
print("usb_keyboard_idle_count:"); phex(usb_keyboard_idle_count); print("\n");
#endif
break;
#ifdef USB_NKRO_ENABLE

View File

@ -1,4 +1,5 @@
#include <stdint.h>
#include <avr/interrupt.h>
#include "usb_keycodes.h"
#include "usb_keyboard.h"
#include "usb_mouse.h"
@ -58,9 +59,12 @@ void host_add_code(uint8_t code)
void host_swap_keyboard_report(void)
{
uint8_t sreg = SREG;
cli();
report_keyboard_t *tmp = keyboard_report_prev;
keyboard_report_prev = keyboard_report;
keyboard_report = tmp;
SREG = sreg;
}
void host_clear_keyboard_report(void)

View File

@ -687,10 +687,11 @@ ISR(USB_GEN_vect)
usb_keyboard_idle_count++;
if (usb_keyboard_idle_count == usb_keyboard_idle_config) {
usb_keyboard_idle_count = 0;
UEDATX = keyboard_report->mods;
UEDATX = keyboard_report_prev->mods;
UEDATX = 0;
for (i=0; i<6; i++) {
UEDATX = keyboard_report->keys[i];
uint8_t keys = usb_keyboard_protocol ? KBD_REPORT_KEYS : 6;
for (i=0; i<keys; i++) {
UEDATX = keyboard_report_prev->keys[i];
}
UEINTX = 0x3A;
}

View File

@ -15,6 +15,7 @@ uint8_t usb_keyboard_protocol=1;
// the idle configuration, how often we send the report to the
// host (ms * 4) even when it hasn't changed
// Windows and Linux set 0 while OS X sets 6(24ms) by SET_IDLE request.
uint8_t usb_keyboard_idle_config=125;
// count until idle timeout

View File

@ -1,3 +1,5 @@
#include <stdint.h>
#include <avr/interrupt.h>
#include "usbdrv.h"
#include "usbconfig.h"
#include "print.h"
@ -63,9 +65,12 @@ void host_add_code(uint8_t code)
void host_swap_keyboard_report(void)
{
uint8_t sreg = SREG;
cli();
report_keyboard_t *tmp = keyboard_report_prev;
keyboard_report_prev = keyboard_report;
keyboard_report = tmp;
SREG = sreg;
}
void host_clear_keyboard_report(void)