adding all ErgoTravel Files (#3129)
* adding all ErgoTravel Files * fixing KC_KEYMAP to LAYOUT_kc on Viet's keymap.cmaster
Pierre Constantineau
Drashna Jaelre
parent
6b1350d764
commit
c5b9533312
|
|
@ -0,0 +1,90 @@
|
|||
/*
|
||||
Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef REV1_CONFIG_H
|
||||
#define REV1_CONFIG_H
|
||||
|
||||
#include QMK_KEYBOARD_CONFIG_H
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xCEEB
|
||||
#define PRODUCT_ID 0x1256
|
||||
#define DEVICE_VER 0x0100
|
||||
#define MANUFACTURER JPConstantineau.com
|
||||
#define PRODUCT ErgoTravel Keyboard
|
||||
#define DESCRIPTION Split 45 percent ergonomic keyboard
|
||||
|
||||
/* key matrix size */
|
||||
// Rows are doubled-up
|
||||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 7
|
||||
|
||||
// wiring of each half
|
||||
#define MATRIX_ROW_PINS { C6, D7, E6, B4 }
|
||||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
#define BACKLIGHT_PIN B5
|
||||
#define BACKLIGHT_LEVELS 5
|
||||
|
||||
/* ws2812 RGB LED */
|
||||
#define RGB_DI_PIN D3
|
||||
#define RGBLIGHT_TIMER
|
||||
#define RGBLED_NUM 12 // Number of LEDs
|
||||
#define ws2812_PORTREG PORTD
|
||||
#define ws2812_DDRREG DDRD
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
// #define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
// #define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1 @@
|
|||
#include "ergotravel.h"
|
||||
|
|
@ -0,0 +1,24 @@
|
|||
#ifndef ERGOTRAVEL_H
|
||||
#define ERGOTRAVEL_H
|
||||
|
||||
#ifdef KEYBOARD_ergotravel_rev1
|
||||
#include "rev1.h"
|
||||
#endif
|
||||
|
||||
#include "quantum.h"
|
||||
|
||||
// Used to create a keymap using only KC_ prefixed keys
|
||||
#define LAYOUT_kc( \
|
||||
L00, L01, L02, L03, L04, L05,L06, R00, R01, R02, R03, R04, R05, R06, \
|
||||
L10, L11, L12, L13, L14, L15,L16, R10, R11, R12, R13, R14, R15, R16,\
|
||||
L20, L21, L22, L23, L24, L25,L26, R20, R21, R22, R23, R24, R25, R26,\
|
||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
|
||||
) \
|
||||
LAYOUT( \
|
||||
KC_##L00, KC_##L01, KC_##L02, KC_##L03, KC_##L04, KC_##L05, KC_##L06, KC_##R00, KC_##R01, KC_##R02, KC_##R03, KC_##R04, KC_##R05, KC_##R06, \
|
||||
KC_##L10, KC_##L11, KC_##L12, KC_##L13, KC_##L14, KC_##L15, KC_##L16, KC_##R10, KC_##R11, KC_##R12, KC_##R13, KC_##R14, KC_##R15, KC_##R16, \
|
||||
KC_##L20, KC_##L21, KC_##L22, KC_##L23, KC_##L24, KC_##L25, KC_##L26, KC_##R20, KC_##R21, KC_##R22, KC_##R23, KC_##R24, KC_##R25, KC_##R26, \
|
||||
KC_##L30, KC_##L31, KC_##L32, KC_##L33, KC_##L34, KC_##L35, KC_##R30, KC_##R31, KC_##R32, KC_##R33, KC_##R34, KC_##R35 \
|
||||
)
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,162 @@
|
|||
#include <util/twi.h>
|
||||
#include <avr/io.h>
|
||||
#include <stdlib.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/twi.h>
|
||||
#include <stdbool.h>
|
||||
#include "i2c.h"
|
||||
|
||||
#ifdef USE_I2C
|
||||
|
||||
// Limits the amount of we wait for any one i2c transaction.
|
||||
// Since were running SCL line 100kHz (=> 10μs/bit), and each transactions is
|
||||
// 9 bits, a single transaction will take around 90μs to complete.
|
||||
//
|
||||
// (F_CPU/SCL_CLOCK) => # of μC cycles to transfer a bit
|
||||
// poll loop takes at least 8 clock cycles to execute
|
||||
#define I2C_LOOP_TIMEOUT (9+1)*(F_CPU/SCL_CLOCK)/8
|
||||
|
||||
#define BUFFER_POS_INC() (slave_buffer_pos = (slave_buffer_pos+1)%SLAVE_BUFFER_SIZE)
|
||||
|
||||
volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
||||
|
||||
static volatile uint8_t slave_buffer_pos;
|
||||
static volatile bool slave_has_register_set = false;
|
||||
|
||||
// Wait for an i2c operation to finish
|
||||
inline static
|
||||
void i2c_delay(void) {
|
||||
uint16_t lim = 0;
|
||||
while(!(TWCR & (1<<TWINT)) && lim < I2C_LOOP_TIMEOUT)
|
||||
lim++;
|
||||
|
||||
// easier way, but will wait slightly longer
|
||||
// _delay_us(100);
|
||||
}
|
||||
|
||||
// Setup twi to run at 100kHz
|
||||
void i2c_master_init(void) {
|
||||
// no prescaler
|
||||
TWSR = 0;
|
||||
// Set TWI clock frequency to SCL_CLOCK. Need TWBR>10.
|
||||
// Check datasheets for more info.
|
||||
TWBR = ((F_CPU/SCL_CLOCK)-16)/2;
|
||||
}
|
||||
|
||||
// Start a transaction with the given i2c slave address. The direction of the
|
||||
// transfer is set with I2C_READ and I2C_WRITE.
|
||||
// returns: 0 => success
|
||||
// 1 => error
|
||||
uint8_t i2c_master_start(uint8_t address) {
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTA);
|
||||
|
||||
i2c_delay();
|
||||
|
||||
// check that we started successfully
|
||||
if ( (TW_STATUS != TW_START) && (TW_STATUS != TW_REP_START))
|
||||
return 1;
|
||||
|
||||
TWDR = address;
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
|
||||
i2c_delay();
|
||||
|
||||
if ( (TW_STATUS != TW_MT_SLA_ACK) && (TW_STATUS != TW_MR_SLA_ACK) )
|
||||
return 1; // slave did not acknowledge
|
||||
else
|
||||
return 0; // success
|
||||
}
|
||||
|
||||
|
||||
// Finish the i2c transaction.
|
||||
void i2c_master_stop(void) {
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (1<<TWSTO);
|
||||
|
||||
uint16_t lim = 0;
|
||||
while(!(TWCR & (1<<TWSTO)) && lim < I2C_LOOP_TIMEOUT)
|
||||
lim++;
|
||||
}
|
||||
|
||||
// Write one byte to the i2c slave.
|
||||
// returns 0 => slave ACK
|
||||
// 1 => slave NACK
|
||||
uint8_t i2c_master_write(uint8_t data) {
|
||||
TWDR = data;
|
||||
TWCR = (1<<TWINT) | (1<<TWEN);
|
||||
|
||||
i2c_delay();
|
||||
|
||||
// check if the slave acknowledged us
|
||||
return (TW_STATUS == TW_MT_DATA_ACK) ? 0 : 1;
|
||||
}
|
||||
|
||||
// Read one byte from the i2c slave. If ack=1 the slave is acknowledged,
|
||||
// if ack=0 the acknowledge bit is not set.
|
||||
// returns: byte read from i2c device
|
||||
uint8_t i2c_master_read(int ack) {
|
||||
TWCR = (1<<TWINT) | (1<<TWEN) | (ack<<TWEA);
|
||||
|
||||
i2c_delay();
|
||||
return TWDR;
|
||||
}
|
||||
|
||||
void i2c_reset_state(void) {
|
||||
TWCR = 0;
|
||||
}
|
||||
|
||||
void i2c_slave_init(uint8_t address) {
|
||||
TWAR = address << 0; // slave i2c address
|
||||
// TWEN - twi enable
|
||||
// TWEA - enable address acknowledgement
|
||||
// TWINT - twi interrupt flag
|
||||
// TWIE - enable the twi interrupt
|
||||
TWCR = (1<<TWIE) | (1<<TWEA) | (1<<TWINT) | (1<<TWEN);
|
||||
}
|
||||
|
||||
ISR(TWI_vect);
|
||||
|
||||
ISR(TWI_vect) {
|
||||
uint8_t ack = 1;
|
||||
switch(TW_STATUS) {
|
||||
case TW_SR_SLA_ACK:
|
||||
// this device has been addressed as a slave receiver
|
||||
slave_has_register_set = false;
|
||||
break;
|
||||
|
||||
case TW_SR_DATA_ACK:
|
||||
// this device has received data as a slave receiver
|
||||
// The first byte that we receive in this transaction sets the location
|
||||
// of the read/write location of the slaves memory that it exposes over
|
||||
// i2c. After that, bytes will be written at slave_buffer_pos, incrementing
|
||||
// slave_buffer_pos after each write.
|
||||
if(!slave_has_register_set) {
|
||||
slave_buffer_pos = TWDR;
|
||||
// don't acknowledge the master if this memory loctaion is out of bounds
|
||||
if ( slave_buffer_pos >= SLAVE_BUFFER_SIZE ) {
|
||||
ack = 0;
|
||||
slave_buffer_pos = 0;
|
||||
}
|
||||
slave_has_register_set = true;
|
||||
} else {
|
||||
i2c_slave_buffer[slave_buffer_pos] = TWDR;
|
||||
BUFFER_POS_INC();
|
||||
}
|
||||
break;
|
||||
|
||||
case TW_ST_SLA_ACK:
|
||||
case TW_ST_DATA_ACK:
|
||||
// master has addressed this device as a slave transmitter and is
|
||||
// requesting data.
|
||||
TWDR = i2c_slave_buffer[slave_buffer_pos];
|
||||
BUFFER_POS_INC();
|
||||
break;
|
||||
|
||||
case TW_BUS_ERROR: // something went wrong, reset twi state
|
||||
TWCR = 0;
|
||||
default:
|
||||
break;
|
||||
}
|
||||
// Reset everything, so we are ready for the next TWI interrupt
|
||||
TWCR |= (1<<TWIE) | (1<<TWINT) | (ack<<TWEA) | (1<<TWEN);
|
||||
}
|
||||
#endif
|
||||
|
|
@ -0,0 +1,49 @@
|
|||
#ifndef I2C_H
|
||||
#define I2C_H
|
||||
|
||||
#include <stdint.h>
|
||||
|
||||
#ifndef F_CPU
|
||||
#define F_CPU 16000000UL
|
||||
#endif
|
||||
|
||||
#define I2C_READ 1
|
||||
#define I2C_WRITE 0
|
||||
|
||||
#define I2C_ACK 1
|
||||
#define I2C_NACK 0
|
||||
|
||||
#define SLAVE_BUFFER_SIZE 0x10
|
||||
|
||||
// i2c SCL clock frequency
|
||||
#define SCL_CLOCK 100000L
|
||||
|
||||
extern volatile uint8_t i2c_slave_buffer[SLAVE_BUFFER_SIZE];
|
||||
|
||||
void i2c_master_init(void);
|
||||
uint8_t i2c_master_start(uint8_t address);
|
||||
void i2c_master_stop(void);
|
||||
uint8_t i2c_master_write(uint8_t data);
|
||||
uint8_t i2c_master_read(int);
|
||||
void i2c_reset_state(void);
|
||||
void i2c_slave_init(uint8_t address);
|
||||
|
||||
|
||||
static inline unsigned char i2c_start_read(unsigned char addr) {
|
||||
return i2c_master_start((addr << 1) | I2C_READ);
|
||||
}
|
||||
|
||||
static inline unsigned char i2c_start_write(unsigned char addr) {
|
||||
return i2c_master_start((addr << 1) | I2C_WRITE);
|
||||
}
|
||||
|
||||
// from SSD1306 scrips
|
||||
extern unsigned char i2c_rep_start(unsigned char addr);
|
||||
extern void i2c_start_wait(unsigned char addr);
|
||||
extern unsigned char i2c_readAck(void);
|
||||
extern unsigned char i2c_readNak(void);
|
||||
extern unsigned char i2c_read(unsigned char ack);
|
||||
|
||||
#define i2c_read(ack) (ack) ? i2c_readAck() : i2c_readNak();
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,15 @@
|
|||
{
|
||||
"keyboard_name": "ErgoTravel",
|
||||
"manufacturer": "jpconstantineau",
|
||||
"identifier": "0x1256",
|
||||
"url": "https://github.com/jpconstantineau/ErgoTravel",
|
||||
"maintainer": "qmk",
|
||||
"processor": "atmega32u4",
|
||||
"width": 14.5,
|
||||
"height": 5,
|
||||
"layouts": {
|
||||
"LAYOUT": {
|
||||
"layout": [{"x":0, "y":0}, {"x":1, "y":0}, {"x":2, "y":0}, {"x":3, "y":0}, {"x":4, "y":0}, {"x":5, "y":0}, {"x":8.5, "y":0}, {"x":9.5, "y":0}, {"x":10.5, "y":0}, {"x":11.5, "y":0}, {"x":12.5, "y":0}, {"x":13.5, "y":0}, {"x":0, "y":1}, {"x":1, "y":1}, {"x":2, "y":1}, {"x":3, "y":1}, {"x":4, "y":1}, {"x":5, "y":1}, {"x":8.5, "y":1}, {"x":9.5, "y":1}, {"x":10.5, "y":1}, {"x":11.5, "y":1}, {"x":12.5, "y":1}, {"x":13.5, "y":1}, {"x":0, "y":2}, {"x":1, "y":2}, {"x":2, "y":2}, {"x":3, "y":2}, {"x":4, "y":2}, {"x":5, "y":2}, {"x":8.5, "y":2}, {"x":9.5, "y":2}, {"x":10.5, "y":2}, {"x":11.5, "y":2}, {"x":12.5, "y":2}, {"x":13.5, "y":2}, {"x":0, "y":3}, {"x":1, "y":3}, {"x":2, "y":3}, {"x":3, "y":3}, {"x":4, "y":3}, {"x":5, "y":3}, {"x":6, "y":3}, {"x":7.5, "y":3}, {"x":8.5, "y":3}, {"x":9.5, "y":3}, {"x":10.5, "y":3}, {"x":11.5, "y":3}, {"x":12.5, "y":3}, {"x":13.5, "y":3}, {"x":4, "y":4}, {"x":5, "y":4}, {"x":6, "y":4}, {"x":7.5, "y":4}, {"x":8.5, "y":4}, {"x":9.5, "y":4}]
|
||||
}
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,46 @@
|
|||
/*
|
||||
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* Use I2C or Serial, not both */
|
||||
|
||||
//#define USE_SERIAL
|
||||
#define USE_I2C
|
||||
|
||||
/* Select hand configuration */
|
||||
|
||||
//#define MASTER_LEFT
|
||||
#define MASTER_RIGHT
|
||||
//#define EE_HANDS
|
||||
|
||||
#define TAPPING_TOGGLE 2
|
||||
|
||||
// required if modifiers are defined in layers besided the default one.
|
||||
#define PREVENT_STUCK_MODIFIERS
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 12
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,202 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
#define _COLEMAK 0
|
||||
#define _QWERTY 1
|
||||
#define _NUMPAD 2
|
||||
#define _LOWER 3
|
||||
#define _RAISE 4
|
||||
#define _ADJUST 16
|
||||
|
||||
enum custom_keycodes {
|
||||
COLEMAK = SAFE_RANGE,
|
||||
QWERTY,
|
||||
NUMPAD,
|
||||
LOWER,
|
||||
RAISE,
|
||||
ADJUST,
|
||||
};
|
||||
|
||||
/* Fn keys */
|
||||
|
||||
enum {
|
||||
|
||||
F_SFT = 0,
|
||||
F_ALT,
|
||||
F_CTRL,
|
||||
F_NUMPAD
|
||||
// F_LOWER,
|
||||
// F_RAISE,
|
||||
};
|
||||
|
||||
#define KC_ KC_TRNS
|
||||
#define _______ KC_TRNS
|
||||
#define KC_XXXX KC_NO
|
||||
|
||||
#define KC_CMK COLEMAK
|
||||
#define KC_QWE QWERTY
|
||||
#define KC_LOWR LOWER
|
||||
#define KC_RASE RAISE
|
||||
#define KC_QRAS QRAISE
|
||||
#define KC_ADJT ADJUST
|
||||
#define KC_RST RESET
|
||||
#define KC_BL_S BL_STEP
|
||||
#define KC_DBUG DEBUG
|
||||
#define KC_RTOG RGB_TOG
|
||||
#define KC_RMOD RGB_MOD
|
||||
#define KC_RHUI RGB_HUI
|
||||
#define KC_RHUD RGB_HUD
|
||||
#define KC_RSAI RGB_SAI
|
||||
#define KC_RSAD RGB_SAD
|
||||
#define KC_RVAI RGB_VAI
|
||||
#define KC_RVAD RGB_VAD
|
||||
//#define KC_CATDEL LCTL(LALT(KC_DEL)) // Ctrl alt del
|
||||
#define KC_CPY LCTL(KC_C)
|
||||
#define KC_PST LCTL(KC_V)
|
||||
#define KC_SELA LCTL(KC_A)
|
||||
#define KC_UDO LCTL(KC_Z)
|
||||
#define KC_CUT LCTL(KC_X)
|
||||
#define KC_SVE LCTL(KC_S)
|
||||
#define KC_OSH F(F_SFT)
|
||||
#define KC_OCTL F(F_CTRL)
|
||||
#define KC_NUMP F(F_NUMPAD)
|
||||
#define KC_SHESC MT(MOD_LSFT,KC_ESC)
|
||||
#define KC_SHENT MT(MOD_RSFT,KC_ENT)
|
||||
//#define KC_NUMP TG(_NUMPAD) // Toggle layer NUMPAD for use in KC_keymaps
|
||||
//#define KC_RST RESET
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
// Colemak Mod-DH is used. https://colemakmods.github.io/mod-dh/
|
||||
[_COLEMAK] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
TAB , Q , W , F , P , B ,LPRN, RPRN, J , L , U , Y ,SCLN,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
BSPC, A , R , S , T , G ,EQL , MINS, K , N , E , I , O ,QUOT,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
SHESC, Z , X , C , D , V ,NUMP, ENT, M , H ,COMM,DOT ,SLSH,SHENT,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
OCTL,LALT,LGUI,DEL ,LOWR, SPC, OSH, RASE,LEFT,RIGHT,RALT,RCTL
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_QWERTY] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
TAB , A , S , D , F , G ,LPRN, RPRN, H , J , K , L ,SCLN,QUOT,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , , , N , M ,COMM,DOT ,SLSH,ENT ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
LCTL,LGUI,LALT,DEL , , SPC, SPC , ,LEFT,DOWN, UP ,RIGHT
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_NUMPAD] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , , , , , , ,ASTR, P7 , P8 , P9 ,SLSH, ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , , , ,PIPE, P4 , P5 , P6 ,MINS, ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , , , ,COMM, P1 , P2 , P3 ,PLUS, ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
, , , , , , , P0 ,NLCK, , ,
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_LOWER] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
,XXXX,XXXX,XXXX,XXXX,CAPS, , ,PGUP,HOME, UP ,END ,DEL , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
,SELA,LALT,LSFT,LCTL,SVE , , ,PGDN,LEFT,DOWN,RGHT,BSPC,INS ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
,UDO ,CUT ,CPY ,PST ,XXXX, , ,XXXX,XXXX,COMM,DOT ,SLSH, ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_RAISE] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
,AMPR,PERC,HASH,EXLM,LPRN, , ,ASTR,RPRN, AT ,DLR ,CIRC,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, 7 , 5 , 3 , 1 , 9 ,LBRC, RBRC, 8 , 0 , 2 , 4 , 6 ,BSLS,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, GRV,TILD,XXXX,EQL ,PLUS, , ,UNDS,MINS,COMM,DOT ,SLSH,ENT ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
|
||||
[_ADJUST] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , , , , , CMK,QWE , , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
, , , , , , , , ,VOLD,VOLU,MUTE
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
)
|
||||
|
||||
};
|
||||
|
||||
const uint16_t PROGMEM fn_actions[] = {
|
||||
[F_SFT] = ACTION_MODS_ONESHOT (MOD_LSFT)
|
||||
,[F_ALT] = ACTION_MODS_ONESHOT (MOD_LALT)
|
||||
,[F_CTRL] = ACTION_MODS_ONESHOT (MOD_LCTL)
|
||||
,[F_NUMPAD] = ACTION_LAYER_TAP_TOGGLE(_NUMPAD)
|
||||
// ,[F_LOWER] = ACTION_LAYER_TAP_TOGGLE(LOWER) // FN1 - Momentary Layer 1 (Lower)
|
||||
// ,[F_RAISE] = ACTION_LAYER_TAP_TOGGLE(RAISE) // FN2 - Momentary Layer 2 (Raise)
|
||||
};
|
||||
|
||||
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case COLEMAK:
|
||||
if (record->event.pressed) {
|
||||
set_single_persistent_default_layer(_COLEMAK);
|
||||
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
set_single_persistent_default_layer(_QWERTY);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case ADJUST:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_ADJUST);
|
||||
} else {
|
||||
layer_off(_ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* Use I2C or Serial, not both */
|
||||
|
||||
#define USE_SERIAL
|
||||
// #define USE_I2C
|
||||
|
||||
/* Select hand configuration */
|
||||
|
||||
#define MASTER_LEFT
|
||||
// #define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 12
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,134 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2
|
||||
#define _ADJUST 16
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
LOWER,
|
||||
RAISE,
|
||||
ADJUST,
|
||||
};
|
||||
|
||||
#define KC_ KC_TRNS
|
||||
#define _______ KC_TRNS
|
||||
|
||||
#define KC_LOWR LOWER
|
||||
#define KC_RASE RAISE
|
||||
#define KC_ADJT ADJUST
|
||||
#define KC_RST RESET
|
||||
#define KC_BL_S BL_STEP
|
||||
#define KC_DBUG DEBUG
|
||||
#define KC_RTOG RGB_TOG
|
||||
#define KC_RMOD RGB_MOD
|
||||
#define KC_RHUI RGB_HUI
|
||||
#define KC_RHUD RGB_HUD
|
||||
#define KC_RSAI RGB_SAI
|
||||
#define KC_RSAD RGB_SAD
|
||||
#define KC_RVAI RGB_VAI
|
||||
#define KC_RVAD RGB_VAD
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
TAB , A , S , D , F , G , A, A, H , J , K , L ,SCLN,QUOT,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_LOWER] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
GRAVE, 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,DEL,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
TAB , F1 , F2 , F3 , F4 , F5 , F6 , D, Y ,MINS, EQL,LBRC,RBRC,BSLS,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LSFT, F7 , F8 , F9 , F10, F11, F12, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_RAISE] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
ESC , 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_ADJUST] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
ESC , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
)
|
||||
|
||||
};
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_SONG(tone_qwerty);
|
||||
#endif
|
||||
set_single_persistent_default_layer(_QWERTY);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case ADJUST:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_ADJUST);
|
||||
} else {
|
||||
layer_off(_ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* Use I2C or Serial, not both */
|
||||
|
||||
#define USE_SERIAL
|
||||
// #define USE_I2C
|
||||
|
||||
/* Select hand configuration */
|
||||
|
||||
// #define MASTER_LEFT
|
||||
#define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 12
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,95 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
enum custom_layers {
|
||||
_COLEMAK,
|
||||
_ADJUST,
|
||||
_RAISE,
|
||||
_LOWER,
|
||||
_QWERTY
|
||||
};
|
||||
|
||||
|
||||
|
||||
#define _______ KC_TRNS
|
||||
#define XXXXXXX KC_NO
|
||||
#define BASELYR TO(_COLEMAK) // base layer
|
||||
#define LOWER MO(_LOWER) // momentary lower layer
|
||||
#define RAISE MO(_RAISE) // momentary raise layer
|
||||
#define ADJUST MO(_ADJUST) // momentary adjust layer
|
||||
#define QWERTY TG(_QWERTY)
|
||||
#define LLOWER TG(_LOWER) // lock for lower layer
|
||||
#define LRAISE TG(_RAISE) // lock for raise layer
|
||||
#define LHALF LALT(LGUI(KC_LEFT)) // spec left half screen
|
||||
#define TLHALF LCTL(LGUI(KC_LEFT)) // spec top left half
|
||||
#define BLHALF LCTL(LSFT(LGUI(KC_LEFT))) // spec bottom left half
|
||||
#define RHALF LALT(LGUI(KC_RIGHT)) // spec right half screen
|
||||
#define TRHALF LCTL(LGUI(KC_RIGHT)) // spec top right half
|
||||
#define BRHALF LCTL(LSFT(LGUI(KC_RIGHT))) // spec bottom right half
|
||||
#define SAFBCK LGUI(KC_LBRC) // safari back
|
||||
#define SAFFWD LGUI(KC_RBRC) // safari forward
|
||||
#define CENTER LALT(LGUI(KC_C)) // spec center
|
||||
#define FULL LALT(LGUI(KC_F)) // spec full screen
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_COLEMAK] = LAYOUT(
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
KC_ESC , KC_Q , KC_W , KC_F , KC_P , KC_G ,KC_LCBR, KC_RCBR, KC_J , KC_L , KC_U , KC_Y ,KC_SCLN,KC_BSPC,
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
KC_TAB , KC_A , KC_R , KC_S , KC_T , KC_D ,KC_LPRN, KC_RPRN, KC_H , KC_N , KC_E , KC_I , KC_O ,KC_QUOT,
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
KC_BSLS, KC_Z , KC_X , KC_C , KC_V , KC_B ,KC_LBRC , KC_RBRC , KC_K , KC_M ,KC_COMM, KC_DOT,KC_SLSH,KC_ENT ,
|
||||
//,------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------.
|
||||
ADJUST ,KC_LCTL,KC_LALT,KC_LGUI, LOWER, KC_SPC, KC_LSFT, RAISE, KC_LEFT, KC_DOWN, KC_UP,KC_RGHT
|
||||
//,------+-------+-------+-------+-------/-------/ \-------\-------+-------+-------+-------+-------'
|
||||
),
|
||||
|
||||
[_ADJUST] = LAYOUT(
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
BASELYR,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, RESET ,
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX, XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,
|
||||
//|------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------.
|
||||
_______,KC_F10 ,KC_F11 ,KC_F12 ,LLOWER ,XXXXXXX, XXXXXXX,LRAISE ,XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX
|
||||
//`------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------'
|
||||
),
|
||||
|
||||
[_RAISE] = LAYOUT(
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
BASELYR,KC_EXLM, KC_AT, KC_HASH, KC_DLR,KC_LCBR,XXXXXXX, XXXXXXX, KC_RCBR, TLHALF, CENTER, TRHALF, XXXXXXX, KC_BSPC,
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
KC_TILD,KC_PERC,KC_CIRC,KC_AMPR,KC_ASTR,KC_LPRN,XXXXXXX, XXXXXXX, KC_RPRN, LHALF, FULL, RHALF, XXXXXXX, KC_VOLU,
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
KC_GRV, KC_MINS,KC_PLUS,KC_UNDS,KC_EQL, KC_LBRC,XXXXXXX, XXXXXXX, KC_RBRC, BLHALF, XXXXXXX, BRHALF, XXXXXXX, KC_VOLD,
|
||||
//|-------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------|
|
||||
XXXXXXX,XXXXXXX,XXXXXXX,XXXXXXX,KC_TRNS,KC_SPC, KC_LSFT, KC_TRNS, XXXXXXX, KC_F14, KC_F15, KC_MUTE
|
||||
//`-------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------'
|
||||
),
|
||||
|
||||
[_LOWER] = LAYOUT(
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
BASELYR, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LCBR,XXXXXXX, XXXXXXX, KC_RCBR, KC_7, KC_8, KC_9, KC_MINS, KC_BSPC,
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
XXXXXXX, XXXXXXX, SAFBCK, XXXXXXX, SAFFWD, KC_LPRN,XXXXXXX, XXXXXXX, KC_RPRN, KC_4, KC_5, KC_6, KC_PLUS, XXXXXXX,
|
||||
//,------+-------+-------+-------+-------+-------+-------. ,-------+-------+-------+-------+-------+-------+-------.
|
||||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_LBRC,XXXXXXX, XXXXXXX, KC_RBRC, KC_1, KC_2, KC_3, KC_ASTR, KC_ENT,
|
||||
//|-------+-------+-------+-------+-------+-------+-------. .-------+-------+-------+-------+-------+-------+-------|
|
||||
XXXXXXX, XXXXXXX, XXXXXXX, XXXXXXX, KC_TRNS, KC_SPC, KC_LSFT, KC_0, KC_0, KC_DOT, KC_SLASH, XXXXXXX
|
||||
//`-------+-------+-------+-------+-------/-------/ \------\-------+-------+-------+-------+-------'
|
||||
)
|
||||
|
||||
};
|
||||
|
||||
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,41 @@
|
|||
/*
|
||||
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* Use I2C or Serial, not both */
|
||||
|
||||
#define USE_SERIAL
|
||||
// #define USE_I2C
|
||||
|
||||
/* Select hand configuration */
|
||||
|
||||
#define MASTER_LEFT
|
||||
// #define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 12
|
||||
#define RGBLIGHT_HUE_STEP 8
|
||||
#define RGBLIGHT_SAT_STEP 8
|
||||
#define RGBLIGHT_VAL_STEP 8
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,129 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _LOWER 1
|
||||
#define _RAISE 2
|
||||
#define _ADJUST 16
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
LOWER,
|
||||
RAISE,
|
||||
ADJUST,
|
||||
};
|
||||
|
||||
#define KC_ KC_TRNS
|
||||
#define _______ KC_TRNS
|
||||
|
||||
#define KC_LOWR LOWER
|
||||
#define KC_RASE RAISE
|
||||
#define KC_ADJT ADJUST
|
||||
#define KC_RST RESET
|
||||
#define KC_BL_S BL_STEP
|
||||
#define KC_DBUG DEBUG
|
||||
#define KC_RTOG RGB_TOG
|
||||
#define KC_RMOD RGB_MOD
|
||||
#define KC_RHUI RGB_HUI
|
||||
#define KC_RHUD RGB_HUD
|
||||
#define KC_RSAI RGB_SAI
|
||||
#define KC_RSAD RGB_SAD
|
||||
#define KC_RVAI RGB_VAI
|
||||
#define KC_RVAD RGB_VAD
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
ESC , Q , W , E , R , T ,LBRC, RBRC, Y , U , I , O , P ,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
TAB , A , S , D , F , G , A, A, H , J , K , L ,SCLN,QUOT,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_LOWER] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
GRAVE, 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,DEL,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
TAB , F1 , F2 , F3 , F4 , F5 , F6 , D, Y ,MINS, EQL,LBRC,RBRC,BSLS,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LSFT, F7 , F8 , F9 , F10, F11, F12, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_RAISE] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
ESC , 1 , 2 , 3 , 4 , 5 , A, B, 6 , 7 , 8 , 9 , 0 ,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_ADJUST] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
ESC , F1 , F2 , F3 , F4 , F5 , F6, F7, F8, F9 ,F10 , F11, F12,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
TAB , Q , W , E , R , T , C , D, Y , U , I , O , P ,DEL ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LSFT, Z , X , C , V , B , A, SPC, N , M ,COMM,DOT ,SLSH,ENT ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
LCTL,LGUI,LALT,ADJT,LOWR,SPC, SPC, RASE,LEFT, UP ,DOWN,RIGHT
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
)
|
||||
|
||||
};
|
||||
|
||||
|
||||
|
||||
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
set_single_persistent_default_layer(_QWERTY);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case LOWER:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_LOWER);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RAISE:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
} else {
|
||||
layer_off(_RAISE);
|
||||
update_tri_layer(_LOWER, _RAISE, _ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case ADJUST:
|
||||
if (record->event.pressed) {
|
||||
layer_on(_ADJUST);
|
||||
} else {
|
||||
layer_off(_ADJUST);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
|
@ -0,0 +1,3 @@
|
|||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,42 @@
|
|||
/*
|
||||
Copyright 2017 Pierre Constantineau <jpconstantineau@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef CONFIG_USER_H
|
||||
#define CONFIG_USER_H
|
||||
|
||||
#include "config_common.h"
|
||||
|
||||
/* Use I2C or Serial, not both */
|
||||
|
||||
#define USE_SERIAL
|
||||
// #define USE_I2C
|
||||
|
||||
/* Select hand configuration */
|
||||
|
||||
//#define MASTER_LEFT
|
||||
#define MASTER_RIGHT
|
||||
// #define EE_HANDS
|
||||
|
||||
#undef RGBLED_NUM
|
||||
#define RGBLIGHT_ANIMATIONS
|
||||
#define RGBLED_NUM 26
|
||||
#define RGBLIGHT_HUE_STEP 20
|
||||
#define RGBLIGHT_SAT_STEP 20
|
||||
#define RGBLIGHT_VAL_STEP 20
|
||||
#define RGBLIGHT_LIMIT_VAL 220
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,327 @@
|
|||
#include "ergotravel.h"
|
||||
#include "action_layer.h"
|
||||
#include "eeconfig.h"
|
||||
#include "mousekey.h"
|
||||
#include "process_unicode.h"
|
||||
extern keymap_config_t keymap_config;
|
||||
|
||||
#define _QWERTY 0
|
||||
#define _NUMBERS 1
|
||||
#define _SYMBOLS 2
|
||||
#define _CODING 3
|
||||
#define _NAVIGATION 4
|
||||
#define _ADJUST 16
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
ADJUST,
|
||||
CODING_SPACE,
|
||||
NUMBERS_SPACE,
|
||||
SYMBOLS_SPACE,
|
||||
NAVIGATE_SPACE,
|
||||
TABLE_FLIP,
|
||||
RESET_TABLE,
|
||||
SHRUG,
|
||||
LOOK_OF_DISAPPROVAL
|
||||
};
|
||||
|
||||
#define KC_ KC_TRNS
|
||||
#define _______ KC_TRNS
|
||||
|
||||
#define KC_ADJT MO(_ADJUST)
|
||||
#define KC_RST RESET
|
||||
#define KC_BL_S BL_STEP
|
||||
#define KC_DBUG DEBUG
|
||||
#define KC_RTOG RGB_TOG
|
||||
#define KC_RMOD RGB_MOD
|
||||
#define KC_RHUI RGB_HUI
|
||||
#define KC_RHUD RGB_HUD
|
||||
#define KC_RSAI RGB_SAI
|
||||
#define KC_RSAD RGB_SAD
|
||||
#define KC_RVAI RGB_VAI
|
||||
#define KC_RVAD RGB_VAD
|
||||
|
||||
#define KC_RSEN MT(MOD_RSFT, KC_ENT) // Tap for enter, hold for right shift
|
||||
|
||||
#define KC_LCCA MT(MOD_LCTL, KC_CAPS) // Tap for caps lock, hold for left control
|
||||
#define KC_SHDE MT(MOD_LSFT, KC_DEL) // Tap for delete, hold for left shift
|
||||
|
||||
#define KC_NAVI MO(_NAVIGATION)
|
||||
|
||||
#define KC_COSP CODING_SPACE
|
||||
#define KC_NUSP NUMBERS_SPACE
|
||||
#define KC_SYSP SYMBOLS_SPACE
|
||||
#define KC_NASP NAVIGATE_SPACE
|
||||
|
||||
#define KC_FLIP TABLE_FLIP
|
||||
#define KC_TSET RESET_TABLE
|
||||
#define KC_SRUG SHRUG
|
||||
#define KC_DISA LOOK_OF_DISAPPROVAL
|
||||
#define KC_RST RESET
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
[_QWERTY] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
TAB , Q , W , E , R , T ,HOME, PGUP, Y , U , I , O , P ,BSPC,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
LCCA, A , S , D , F , G ,END , PGDN, H , J , K , L ,SCLN,QUOT,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
SHDE, Z , X , C , V , B ,LGUI, RALT, N , M ,COMM,DOT ,SLSH,RSEN,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
ESC ,ADJT,LALT,ENT ,NUSP,NASP, SYSP,COSP,RCTL,NAVI,ADJT,DEL
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_NUMBERS] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
GRAVE, 1 , 2 , 3 , 4 , 5 ,MPLY, VOLU, 6 , 7 , 8 , 9 , 0 , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , ,MNXT, VOLD,FLIP,TSET,SRUG,DISA, , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_SYMBOLS] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
GRAVE,EXLM, AT ,HASH,DLR ,PERC,MPLY, VOLU,CIRC,AMPR,ASTR,LPRN,RPRN,BSLS,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , ,MNXT, VOLD, , , , , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_CODING] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , ,LCBR,RCBR, ,MPLY, VOLU, ,AMPR,PIPE,DLR , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , ,LPRN,RPRN, ,MNXT, VOLD, ,UNDS,MINS,ASTR, , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , ,LBRC,RBRC, , , , ,PLUS,EQL , , , ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_NAVIGATION] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
, , , UP , , ,MPLY, VOLU,WH_U,BTN1,MS_U,BTN1, , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, ,LEFT,DOWN,RGHT, ,MNXT, VOLD,WH_D,MS_L,MS_D,MS_R, , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , , , , ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
),
|
||||
|
||||
[_ADJUST] = LAYOUT_kc(
|
||||
//,----+----+----+----+----+----+----. ,----+----+----+----+----+----+----.
|
||||
F1 ,F2 ,F3 ,F4 ,F5 ,F6 , , ,F7 ,F8 ,F9 ,F10 ,F11 ,F12 ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
,RTOG,RVAI,RHUI,RSAI, , , , , , , , , ,
|
||||
//|----+----+----+----+----+----+----| |----+----+----+----+----+----+----|
|
||||
,RMOD,RVAD,RHUD,RSAD, , , ,RST , , , , , ,
|
||||
//|----+----+----+----+----+----+----. .----+----+----+----+----+----+----|
|
||||
, , , , , , , , , , ,
|
||||
//`----+----+----+--+-+----/----/ \----\----+----+----+----+----'
|
||||
)
|
||||
|
||||
};
|
||||
|
||||
|
||||
#ifdef AUDIO_ENABLE
|
||||
float tone_qwerty[][2] = SONG(QWERTY_SOUND);
|
||||
#endif
|
||||
|
||||
void persistent_default_layer_set(uint16_t default_layer) {
|
||||
eeconfig_update_default_layer(default_layer);
|
||||
default_layer_set(default_layer);
|
||||
}
|
||||
|
||||
uint16_t custom_lt_timer;
|
||||
keypos_t prv_key_pressed;
|
||||
// Runs just one time when the keyboard initializes.
|
||||
void matrix_init_user(void) {
|
||||
// set_unicode_input_mode(UC_LNX); // Linux
|
||||
set_unicode_input_mode(UC_OSX); // Mac OSX
|
||||
// set_unicode_input_mode(UC_WIN); // Windows (with registry key, see wiki)
|
||||
//set_unicode_input_mode(UC_WINC); // Windows (with WinCompose, see wiki)
|
||||
};
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
|
||||
if(record->event.pressed) prv_key_pressed = record->event.key;
|
||||
#define IS_KEYPOS_SAME(keyone,keytwo) ((keyone.col==keytwo.col)&&(keyone.row==keytwo.row))
|
||||
#define ANOTHER_KEY_PRESSED (!IS_KEYPOS_SAME(prv_key_pressed, record->event.key))
|
||||
|
||||
inline void tap(uint16_t keycode) {
|
||||
register_code(keycode);
|
||||
unregister_code(keycode);
|
||||
};
|
||||
|
||||
inline void swapInput(void) {
|
||||
register_code(KC_LGUI);
|
||||
tap(KC_SPC);
|
||||
unregister_code(KC_LGUI);
|
||||
};
|
||||
|
||||
switch (keycode) {
|
||||
case QWERTY:
|
||||
if (record->event.pressed) {
|
||||
#ifdef AUDIO_ENABLE
|
||||
PLAY_SONG(tone_qwerty);
|
||||
#endif
|
||||
persistent_default_layer_set(1UL<<_QWERTY);
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case CODING_SPACE:
|
||||
if (record->event.pressed) {
|
||||
custom_lt_timer = timer_read();
|
||||
layer_on(_CODING);
|
||||
} else {
|
||||
layer_off(_CODING);
|
||||
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
|
||||
register_code(KC_SPC);
|
||||
unregister_code(KC_SPC);
|
||||
}
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case NUMBERS_SPACE:
|
||||
if (record->event.pressed) {
|
||||
custom_lt_timer = timer_read();
|
||||
layer_on(_NUMBERS);
|
||||
} else {
|
||||
layer_off(_NUMBERS);
|
||||
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
|
||||
register_code(KC_SPC);
|
||||
unregister_code(KC_SPC);
|
||||
}
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case SYMBOLS_SPACE:
|
||||
if (record->event.pressed) {
|
||||
custom_lt_timer = timer_read();
|
||||
layer_on(_SYMBOLS);
|
||||
} else {
|
||||
layer_off(_SYMBOLS);
|
||||
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
|
||||
register_code(KC_SPC);
|
||||
unregister_code(KC_SPC);
|
||||
}
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case NAVIGATE_SPACE:
|
||||
if (record->event.pressed) {
|
||||
custom_lt_timer = timer_read();
|
||||
layer_on(_NAVIGATION);
|
||||
} else {
|
||||
layer_off(_NAVIGATION);
|
||||
if (timer_elapsed(custom_lt_timer)<150 && (!ANOTHER_KEY_PRESSED)) {
|
||||
register_code(KC_SPC);
|
||||
unregister_code(KC_SPC);
|
||||
}
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case TABLE_FLIP:
|
||||
if (record->event.pressed) {
|
||||
swapInput();
|
||||
|
||||
register_code(KC_RSFT);
|
||||
tap(KC_9);
|
||||
unregister_code(KC_RSFT);
|
||||
process_unicode((0x256F|QK_UNICODE), record); // Arm
|
||||
process_unicode((0x00B0|QK_UNICODE), record); // Eye
|
||||
process_unicode((0x25A1|QK_UNICODE), record); // Mouth
|
||||
process_unicode((0x00B0|QK_UNICODE), record); // Eye
|
||||
register_code(KC_RSFT);
|
||||
tap(KC_0);
|
||||
unregister_code(KC_RSFT);
|
||||
process_unicode((0x256F|QK_UNICODE), record); // Arm
|
||||
tap(KC_SPC);
|
||||
process_unicode((0x0361|QK_UNICODE), record); // Flippy
|
||||
tap(KC_SPC);
|
||||
process_unicode((0x253B|QK_UNICODE), record); // Table
|
||||
process_unicode((0x2501|QK_UNICODE), record); // Table
|
||||
process_unicode((0x253B|QK_UNICODE), record); // Table
|
||||
|
||||
swapInput();
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case RESET_TABLE: // ┬──┬ ノ( ゜-゜ノ)
|
||||
if (record->event.pressed) {
|
||||
swapInput();
|
||||
|
||||
process_unicode((0x252C|QK_UNICODE), record); // Table
|
||||
process_unicode((0x2500|QK_UNICODE), record); // Table
|
||||
process_unicode((0x2500|QK_UNICODE), record); // Table
|
||||
process_unicode((0x252C|QK_UNICODE), record); // Table
|
||||
tap(KC_SPC);
|
||||
process_unicode((0x30CE|QK_UNICODE), record); // Arm
|
||||
register_code(KC_RSFT);
|
||||
tap(KC_9);
|
||||
unregister_code(KC_RSFT);
|
||||
tap(KC_SPC);
|
||||
process_unicode((0x309C|QK_UNICODE), record); // Eye
|
||||
tap(KC_MINS);
|
||||
process_unicode((0x309C|QK_UNICODE), record); // Eye
|
||||
process_unicode((0x30CE|QK_UNICODE), record); // Arm
|
||||
register_code(KC_RSFT);
|
||||
tap(KC_0);
|
||||
unregister_code(KC_RSFT);
|
||||
|
||||
swapInput();
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case SHRUG: // ¯\_(ツ)_/¯
|
||||
if (record->event.pressed) {
|
||||
swapInput();
|
||||
|
||||
process_unicode((0x00AF|QK_UNICODE), record); // Hand
|
||||
tap(KC_BSLS); // Arm
|
||||
register_code(KC_RSFT);
|
||||
tap(KC_UNDS); // Arm
|
||||
tap(KC_LPRN); // Head
|
||||
unregister_code(KC_RSFT);
|
||||
process_unicode((0x30C4|QK_UNICODE), record); // Face
|
||||
register_code(KC_RSFT);
|
||||
tap(KC_RPRN); // Head
|
||||
tap(KC_UNDS); // Arm
|
||||
unregister_code(KC_RSFT);
|
||||
tap(KC_SLSH); // Arm
|
||||
process_unicode((0x00AF|QK_UNICODE), record); // Hand
|
||||
|
||||
swapInput();
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
case LOOK_OF_DISAPPROVAL: // ಠ_ಠ
|
||||
if(record->event.pressed){
|
||||
swapInput();
|
||||
|
||||
process_unicode((0x0CA0|QK_UNICODE), record); // Eye
|
||||
register_code(KC_RSFT);
|
||||
tap(KC_MINS);
|
||||
unregister_code(KC_RSFT);
|
||||
process_unicode((0x0CA0|QK_UNICODE), record); // Eye
|
||||
|
||||
swapInput();
|
||||
}
|
||||
return false;
|
||||
break;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
|
@ -0,0 +1,7 @@
|
|||
RGBLIGHT_ENABLE = yes
|
||||
BACKLIGHT_ENABLE = no
|
||||
UNICODE_ENABLE = yes
|
||||
|
||||
ifndef QUANTUM_DIR
|
||||
include ../../../../Makefile
|
||||
endif
|
||||
|
|
@ -0,0 +1,482 @@
|
|||
/*
|
||||
Copyright 2018 Pierre Constantineau
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
/*
|
||||
* scan matrix
|
||||
*/
|
||||
#include <stdint.h>
|
||||
#include <stdbool.h>
|
||||
#include <avr/io.h>
|
||||
#include "wait.h"
|
||||
#include "print.h"
|
||||
#include "debug.h"
|
||||
#include "util.h"
|
||||
#include "matrix.h"
|
||||
#include "split_util.h"
|
||||
#include "pro_micro.h"
|
||||
#include "config.h"
|
||||
#include "timer.h"
|
||||
#include "backlight.h"
|
||||
|
||||
#ifdef USE_I2C
|
||||
# include "i2c.h"
|
||||
#else // USE_SERIAL
|
||||
# include "serial.h"
|
||||
#endif
|
||||
|
||||
#ifndef DEBOUNCING_DELAY
|
||||
# define DEBOUNCING_DELAY 5
|
||||
#endif
|
||||
|
||||
#if (DEBOUNCING_DELAY > 0)
|
||||
static uint16_t debouncing_time;
|
||||
static bool debouncing = false;
|
||||
#endif
|
||||
|
||||
#if (MATRIX_COLS <= 8)
|
||||
# define print_matrix_header() print("\nr/c 01234567\n")
|
||||
# define print_matrix_row(row) print_bin_reverse8(matrix_get_row(row))
|
||||
# define matrix_bitpop(i) bitpop(matrix[i])
|
||||
# define ROW_SHIFTER ((uint8_t)1)
|
||||
#else
|
||||
# error "Currently only supports 8 COLS"
|
||||
#endif
|
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||
|
||||
#define ERROR_DISCONNECT_COUNT 5
|
||||
|
||||
#define SERIAL_LED_ADDR 0x00
|
||||
|
||||
#define ROWS_PER_HAND (MATRIX_ROWS/2)
|
||||
|
||||
static uint8_t error_count = 0;
|
||||
|
||||
static const uint8_t row_pins[MATRIX_ROWS] = MATRIX_ROW_PINS;
|
||||
static const uint8_t col_pins[MATRIX_COLS] = MATRIX_COL_PINS;
|
||||
|
||||
/* matrix state(1:on, 0:off) */
|
||||
static matrix_row_t matrix[MATRIX_ROWS];
|
||||
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
|
||||
|
||||
#if (DIODE_DIRECTION == COL2ROW)
|
||||
static void init_cols(void);
|
||||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row);
|
||||
static void unselect_rows(void);
|
||||
static void select_row(uint8_t row);
|
||||
static void unselect_row(uint8_t row);
|
||||
#elif (DIODE_DIRECTION == ROW2COL)
|
||||
static void init_rows(void);
|
||||
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col);
|
||||
static void unselect_cols(void);
|
||||
static void unselect_col(uint8_t col);
|
||||
static void select_col(uint8_t col);
|
||||
#endif
|
||||
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_kb(void) {
|
||||
matrix_init_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_kb(void) {
|
||||
matrix_scan_user();
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
__attribute__ ((weak))
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_rows(void)
|
||||
{
|
||||
return MATRIX_ROWS;
|
||||
}
|
||||
|
||||
inline
|
||||
uint8_t matrix_cols(void)
|
||||
{
|
||||
return MATRIX_COLS;
|
||||
}
|
||||
|
||||
void matrix_init(void)
|
||||
{
|
||||
debug_enable = true;
|
||||
debug_matrix = true;
|
||||
debug_mouse = true;
|
||||
// initialize row and col
|
||||
unselect_rows();
|
||||
init_cols();
|
||||
|
||||
TX_RX_LED_INIT;
|
||||
|
||||
// initialize matrix state: all keys off
|
||||
for (uint8_t i=0; i < MATRIX_ROWS; i++) {
|
||||
matrix[i] = 0;
|
||||
matrix_debouncing[i] = 0;
|
||||
}
|
||||
|
||||
matrix_init_quantum();
|
||||
|
||||
}
|
||||
|
||||
uint8_t _matrix_scan(void)
|
||||
{
|
||||
int offset = isLeftHand ? 0 : (ROWS_PER_HAND);
|
||||
#if (DIODE_DIRECTION == COL2ROW)
|
||||
// Set row, read cols
|
||||
for (uint8_t current_row = 0; current_row < ROWS_PER_HAND; current_row++) {
|
||||
# if (DEBOUNCING_DELAY > 0)
|
||||
bool matrix_changed = read_cols_on_row(matrix_debouncing+offset, current_row);
|
||||
|
||||
if (matrix_changed) {
|
||||
debouncing = true;
|
||||
debouncing_time = timer_read();
|
||||
PORTD ^= (1 << 2);
|
||||
}
|
||||
|
||||
# else
|
||||
read_cols_on_row(matrix+offset, current_row);
|
||||
# endif
|
||||
|
||||
}
|
||||
|
||||
#elif (DIODE_DIRECTION == ROW2COL)
|
||||
// Set col, read rows
|
||||
for (uint8_t current_col = 0; current_col < MATRIX_COLS; current_col++) {
|
||||
# if (DEBOUNCING_DELAY > 0)
|
||||
bool matrix_changed = read_rows_on_col(matrix_debouncing+offset, current_col);
|
||||
if (matrix_changed) {
|
||||
debouncing = true;
|
||||
debouncing_time = timer_read();
|
||||
}
|
||||
# else
|
||||
read_rows_on_col(matrix+offset, current_col);
|
||||
# endif
|
||||
|
||||
}
|
||||
#endif
|
||||
|
||||
# if (DEBOUNCING_DELAY > 0)
|
||||
if (debouncing && (timer_elapsed(debouncing_time) > DEBOUNCING_DELAY)) {
|
||||
for (uint8_t i = 0; i < ROWS_PER_HAND; i++) {
|
||||
matrix[i+offset] = matrix_debouncing[i+offset];
|
||||
}
|
||||
debouncing = false;
|
||||
}
|
||||
# endif
|
||||
|
||||
return 1;
|
||||
}
|
||||
|
||||
#ifdef USE_I2C
|
||||
|
||||
// Get rows from other half over i2c
|
||||
int i2c_transaction(void) {
|
||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
||||
|
||||
int err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_WRITE);
|
||||
if (err) goto i2c_error;
|
||||
|
||||
// start of matrix stored at 0x00
|
||||
err = i2c_master_write(0x00);
|
||||
if (err) goto i2c_error;
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
// Write backlight level for slave to read
|
||||
err = i2c_master_write(get_backlight_level());
|
||||
#else
|
||||
// Write zero, so our byte index is the same
|
||||
err = i2c_master_write(0x00);
|
||||
#endif
|
||||
if (err) goto i2c_error;
|
||||
|
||||
// Start read
|
||||
err = i2c_master_start(SLAVE_I2C_ADDRESS + I2C_READ);
|
||||
if (err) goto i2c_error;
|
||||
|
||||
if (!err) {
|
||||
int i;
|
||||
for (i = 0; i < ROWS_PER_HAND-1; ++i) {
|
||||
matrix[slaveOffset+i] = i2c_master_read(I2C_ACK);
|
||||
}
|
||||
matrix[slaveOffset+i] = i2c_master_read(I2C_NACK);
|
||||
i2c_master_stop();
|
||||
} else {
|
||||
i2c_error: // the cable is disconnceted, or something else went wrong
|
||||
i2c_reset_state();
|
||||
return err;
|
||||
}
|
||||
|
||||
return 0;
|
||||
}
|
||||
|
||||
#else // USE_SERIAL
|
||||
|
||||
int serial_transaction(void) {
|
||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
||||
|
||||
if (serial_update_buffers()) {
|
||||
return 1;
|
||||
}
|
||||
|
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||
matrix[slaveOffset+i] = serial_slave_buffer[i];
|
||||
}
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
// Write backlight level for slave to read
|
||||
serial_master_buffer[SERIAL_LED_ADDR] = get_backlight_level();
|
||||
#endif
|
||||
return 0;
|
||||
}
|
||||
#endif
|
||||
|
||||
uint8_t matrix_scan(void)
|
||||
{
|
||||
uint8_t ret = _matrix_scan();
|
||||
|
||||
#ifdef USE_I2C
|
||||
if( i2c_transaction() ) {
|
||||
#else // USE_SERIAL
|
||||
if( serial_transaction() ) {
|
||||
#endif
|
||||
// turn on the indicator led when halves are disconnected
|
||||
TXLED1;
|
||||
|
||||
error_count++;
|
||||
|
||||
if (error_count > ERROR_DISCONNECT_COUNT) {
|
||||
// reset other half if disconnected
|
||||
int slaveOffset = (isLeftHand) ? (ROWS_PER_HAND) : 0;
|
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||
matrix[slaveOffset+i] = 0;
|
||||
}
|
||||
}
|
||||
} else {
|
||||
// turn off the indicator led on no error
|
||||
TXLED0;
|
||||
error_count = 0;
|
||||
}
|
||||
matrix_scan_quantum();
|
||||
return ret;
|
||||
}
|
||||
|
||||
void matrix_slave_scan(void) {
|
||||
_matrix_scan();
|
||||
|
||||
int offset = (isLeftHand) ? 0 : ROWS_PER_HAND;
|
||||
|
||||
#ifdef USE_I2C
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
// Read backlight level sent from master and update level on slave
|
||||
backlight_set(i2c_slave_buffer[0]);
|
||||
#endif
|
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||
i2c_slave_buffer[i+1] = matrix[offset+i];
|
||||
}
|
||||
#else // USE_SERIAL
|
||||
for (int i = 0; i < ROWS_PER_HAND; ++i) {
|
||||
serial_slave_buffer[i] = matrix[offset+i];
|
||||
}
|
||||
|
||||
#ifdef BACKLIGHT_ENABLE
|
||||
// Read backlight level sent from master and update level on slave
|
||||
backlight_set(serial_master_buffer[SERIAL_LED_ADDR]);
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
||||
bool matrix_is_modified(void)
|
||||
{
|
||||
if (debouncing) return false;
|
||||
return true;
|
||||
}
|
||||
|
||||
inline
|
||||
bool matrix_is_on(uint8_t row, uint8_t col)
|
||||
{
|
||||
return (matrix[row] & ((matrix_row_t)1<<col));
|
||||
}
|
||||
|
||||
inline
|
||||
matrix_row_t matrix_get_row(uint8_t row)
|
||||
{
|
||||
return matrix[row];
|
||||
}
|
||||
|
||||
void matrix_print(void)
|
||||
{
|
||||
print("\nr/c 0123456789ABCDEF\n");
|
||||
for (uint8_t row = 0; row < MATRIX_ROWS; row++) {
|
||||
phex(row); print(": ");
|
||||
pbin_reverse16(matrix_get_row(row));
|
||||
print("\n");
|
||||
}
|
||||
}
|
||||
|
||||
uint8_t matrix_key_count(void)
|
||||
{
|
||||
uint8_t count = 0;
|
||||
for (uint8_t i = 0; i < MATRIX_ROWS; i++) {
|
||||
count += bitpop16(matrix[i]);
|
||||
}
|
||||
return count;
|
||||
}
|
||||
|
||||
#if (DIODE_DIRECTION == COL2ROW)
|
||||
|
||||
static void init_cols(void)
|
||||
{
|
||||
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
|
||||
uint8_t pin = col_pins[x];
|
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
}
|
||||
}
|
||||
|
||||
static bool read_cols_on_row(matrix_row_t current_matrix[], uint8_t current_row)
|
||||
{
|
||||
// Store last value of row prior to reading
|
||||
matrix_row_t last_row_value = current_matrix[current_row];
|
||||
|
||||
// Clear data in matrix row
|
||||
current_matrix[current_row] = 0;
|
||||
|
||||
// Select row and wait for row selecton to stabilize
|
||||
select_row(current_row);
|
||||
wait_us(30);
|
||||
|
||||
// For each col...
|
||||
for(uint8_t col_index = 0; col_index < MATRIX_COLS; col_index++) {
|
||||
|
||||
// Select the col pin to read (active low)
|
||||
uint8_t pin = col_pins[col_index];
|
||||
uint8_t pin_state = (_SFR_IO8(pin >> 4) & _BV(pin & 0xF));
|
||||
|
||||
// Populate the matrix row with the state of the col pin
|
||||
current_matrix[current_row] |= pin_state ? 0 : (ROW_SHIFTER << col_index);
|
||||
}
|
||||
|
||||
// Unselect row
|
||||
unselect_row(current_row);
|
||||
|
||||
return (last_row_value != current_matrix[current_row]);
|
||||
}
|
||||
|
||||
static void select_row(uint8_t row)
|
||||
{
|
||||
uint8_t pin = row_pins[row];
|
||||
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
|
||||
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
|
||||
}
|
||||
|
||||
static void unselect_row(uint8_t row)
|
||||
{
|
||||
uint8_t pin = row_pins[row];
|
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
}
|
||||
|
||||
static void unselect_rows(void)
|
||||
{
|
||||
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
|
||||
uint8_t pin = row_pins[x];
|
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
}
|
||||
}
|
||||
|
||||
#elif (DIODE_DIRECTION == ROW2COL)
|
||||
|
||||
static void init_rows(void)
|
||||
{
|
||||
for(uint8_t x = 0; x < ROWS_PER_HAND; x++) {
|
||||
uint8_t pin = row_pins[x];
|
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
}
|
||||
}
|
||||
|
||||
static bool read_rows_on_col(matrix_row_t current_matrix[], uint8_t current_col)
|
||||
{
|
||||
bool matrix_changed = false;
|
||||
|
||||
// Select col and wait for col selecton to stabilize
|
||||
select_col(current_col);
|
||||
wait_us(30);
|
||||
|
||||
// For each row...
|
||||
for(uint8_t row_index = 0; row_index < ROWS_PER_HAND; row_index++)
|
||||
{
|
||||
|
||||
// Store last value of row prior to reading
|
||||
matrix_row_t last_row_value = current_matrix[row_index];
|
||||
|
||||
// Check row pin state
|
||||
if ((_SFR_IO8(row_pins[row_index] >> 4) & _BV(row_pins[row_index] & 0xF)) == 0)
|
||||
{
|
||||
// Pin LO, set col bit
|
||||
current_matrix[row_index] |= (ROW_SHIFTER << current_col);
|
||||
}
|
||||
else
|
||||
{
|
||||
// Pin HI, clear col bit
|
||||
current_matrix[row_index] &= ~(ROW_SHIFTER << current_col);
|
||||
}
|
||||
|
||||
// Determine if the matrix changed state
|
||||
if ((last_row_value != current_matrix[row_index]) && !(matrix_changed))
|
||||
{
|
||||
matrix_changed = true;
|
||||
}
|
||||
}
|
||||
|
||||
// Unselect col
|
||||
unselect_col(current_col);
|
||||
|
||||
return matrix_changed;
|
||||
}
|
||||
|
||||
static void select_col(uint8_t col)
|
||||
{
|
||||
uint8_t pin = col_pins[col];
|
||||
_SFR_IO8((pin >> 4) + 1) |= _BV(pin & 0xF); // OUT
|
||||
_SFR_IO8((pin >> 4) + 2) &= ~_BV(pin & 0xF); // LOW
|
||||
}
|
||||
|
||||
static void unselect_col(uint8_t col)
|
||||
{
|
||||
uint8_t pin = col_pins[col];
|
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
}
|
||||
|
||||
static void unselect_cols(void)
|
||||
{
|
||||
for(uint8_t x = 0; x < MATRIX_COLS; x++) {
|
||||
uint8_t pin = col_pins[x];
|
||||
_SFR_IO8((pin >> 4) + 1) &= ~_BV(pin & 0xF); // IN
|
||||
_SFR_IO8((pin >> 4) + 2) |= _BV(pin & 0xF); // HI
|
||||
}
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,28 @@
|
|||
ErgoTravel
|
||||
====
|
||||
|
||||
|
||||
|
||||
|
||||
A split ergo 4x6 keyboard with 2 or 3 thumb keys and extra inner macro keys designed by Pierre Constantineau. [More info on the GitHub Repo](https://github.com/jpconstantineau/ErgoTravel).
|
||||
|
||||
**Status** The ErgoTravel is currently being beta-tested.
|
||||
|
||||
Keyboard Maintainer: [/u/jpconstantineau](https://github.com/jpconstantineau)
|
||||
|
||||
Hardware Supported: Pro Micro (ATmega32U4)
|
||||
|
||||
Hardware Availability: [Group Buys](https://keyboards.jpconstantineau.com/) or order your own [yourself](https://github.com/jpconstantineau/ErgoTravel/blob/master/OrderingInstructions.md)
|
||||
|
||||
|
||||
Make example for this keyboard (after setting up your build environment):
|
||||
|
||||
make ergotravel/rev1:default
|
||||
|
||||
Example of flashing this keyboard:
|
||||
|
||||
make ergotravel/rev1:default:avrdude
|
||||
|
||||
See [build environment setup](https://docs.qmk.fm/build_environment_setup.html) then the [make instructions](https://docs.qmk.fm/make_instructions.html) for more information.
|
||||
|
||||
A build guide for this keyboard can be found here: [Build Guide](https://github.com/jpconstantineau)
|
||||
|
|
@ -0,0 +1,90 @@
|
|||
/*
|
||||
Copyright 2018 Pierre Constantineau <jpconstantineau@gmail.com>
|
||||
|
||||
This program is free software: you can redistribute it and/or modify
|
||||
it under the terms of the GNU General Public License as published by
|
||||
the Free Software Foundation, either version 2 of the License, or
|
||||
(at your option) any later version.
|
||||
|
||||
This program is distributed in the hope that it will be useful,
|
||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
GNU General Public License for more details.
|
||||
|
||||
You should have received a copy of the GNU General Public License
|
||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*/
|
||||
|
||||
#ifndef REV1_CONFIG_H
|
||||
#define REV1_CONFIG_H
|
||||
|
||||
#include QMK_KEYBOARD_CONFIG_H
|
||||
|
||||
/* USB Device descriptor parameter */
|
||||
#define VENDOR_ID 0xCEEB
|
||||
#define PRODUCT_ID 0x1256
|
||||
#define DEVICE_VER 0x0100
|
||||
#define MANUFACTURER JPConstantineau.com
|
||||
#define PRODUCT ErgoTravel Keyboard
|
||||
#define DESCRIPTION Split 45 percent ergonomic keyboard
|
||||
|
||||
/* key matrix size */
|
||||
// Rows are doubled-up
|
||||
#define MATRIX_ROWS 8
|
||||
#define MATRIX_COLS 7
|
||||
|
||||
// wiring of each half
|
||||
#define MATRIX_ROW_PINS { C6, D7, E6, B4 }
|
||||
#define MATRIX_COL_PINS { F5, F6, F7, B1, B3, B2, B6 }
|
||||
|
||||
/* COL2ROW or ROW2COL */
|
||||
#define DIODE_DIRECTION COL2ROW
|
||||
|
||||
/* define if matrix has ghost */
|
||||
//#define MATRIX_HAS_GHOST
|
||||
|
||||
/* number of backlight levels */
|
||||
// #define BACKLIGHT_LEVELS 3
|
||||
|
||||
/* Set 0 if debouncing isn't needed */
|
||||
#define DEBOUNCING_DELAY 5
|
||||
|
||||
/* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
|
||||
#define LOCKING_SUPPORT_ENABLE
|
||||
/* Locking resynchronize hack */
|
||||
#define LOCKING_RESYNC_ENABLE
|
||||
|
||||
/* key combination for command */
|
||||
#define IS_COMMAND() ( \
|
||||
keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)) \
|
||||
)
|
||||
|
||||
#define BACKLIGHT_PIN B5
|
||||
#define BACKLIGHT_LEVELS 5
|
||||
|
||||
/* ws2812 RGB LED */
|
||||
#define RGB_DI_PIN D3
|
||||
#define RGBLIGHT_TIMER
|
||||
#define RGBLED_NUM 12 // Number of LEDs
|
||||
#define ws2812_PORTREG PORTD
|
||||
#define ws2812_DDRREG DDRD
|
||||
|
||||
/*
|
||||
* Feature disable options
|
||||
* These options are also useful to firmware size reduction.
|
||||
*/
|
||||
|
||||
/* disable debug print */
|
||||
// #define NO_DEBUG
|
||||
|
||||
/* disable print */
|
||||
// #define NO_PRINT
|
||||
|
||||
/* disable action features */
|
||||
//#define NO_ACTION_LAYER
|
||||
//#define NO_ACTION_TAPPING
|
||||
//#define NO_ACTION_ONESHOT
|
||||
//#define NO_ACTION_MACRO
|
||||
//#define NO_ACTION_FUNCTION
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,22 @@
|
|||
#include "rev1.h"
|
||||
|
||||
|
||||
#ifdef SSD1306OLED
|
||||
void led_set_kb(uint8_t usb_led) {
|
||||
// put your keyboard LED indicator (ex: Caps Lock LED) toggling code here
|
||||
led_set_user(usb_led);
|
||||
}
|
||||
#endif
|
||||
|
||||
void matrix_init_kb(void) {
|
||||
|
||||
// // green led on
|
||||
// DDRD |= (1<<5);
|
||||
// PORTD &= ~(1<<5);
|
||||
|
||||
// // orange led on
|
||||
// DDRB |= (1<<0);
|
||||
// PORTB &= ~(1<<0);
|
||||
|
||||
matrix_init_user();
|
||||
};
|
||||
|
|
@ -0,0 +1,37 @@
|
|||
#ifndef REV1_H
|
||||
#define REV1_H
|
||||
|
||||
#include "ergotravel.h"
|
||||
|
||||
//void promicro_bootloader_jmp(bool program);
|
||||
#include "quantum.h"
|
||||
|
||||
|
||||
#ifdef USE_I2C
|
||||
#include <stddef.h>
|
||||
#ifdef __AVR__
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//void promicro_bootloader_jmp(bool program);
|
||||
|
||||
#define LAYOUT( \
|
||||
L00, L01, L02, L03, L04, L05,L06, R00, R01, R02, R03, R04, R05,R06, \
|
||||
L10, L11, L12, L13, L14, L15,L16, R10, R11, R12, R13, R14, R15,R16, \
|
||||
L20, L21, L22, L23, L24, L25,L26, R20, R21, R22, R23, R24, R25,R26, \
|
||||
L30, L31, L32, L33, L34, L35, R30, R31, R32, R33, R34, R35 \
|
||||
) \
|
||||
{ \
|
||||
{ L00, L01, L02, L03, L04, L05, L06 }, \
|
||||
{ L10, L11, L12, L13, L14, L15, L16 }, \
|
||||
{ L20, L21, L22, L23, L24, L25, L26 }, \
|
||||
{ L30, L31, L32, L33, L34, L35, KC_NO }, \
|
||||
{ R06, R05, R04, R03, R02, R01, R00 }, \
|
||||
{ R16, R15, R14, R13, R12, R11, R10 }, \
|
||||
{ R26, R25, R24, R23, R22, R21, R20 }, \
|
||||
{ R35, R34, R33, R32, R31, R30, KC_NO } \
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1 @@
|
|||
BACKLIGHT_ENABLE = no
|
||||
|
|
@ -0,0 +1,74 @@
|
|||
SRC += matrix.c \
|
||||
i2c.c \
|
||||
split_util.c \
|
||||
serial.c
|
||||
|
||||
# MCU name
|
||||
#MCU = at90usb1287
|
||||
MCU = atmega32u4
|
||||
|
||||
# Processor frequency.
|
||||
# This will define a symbol, F_CPU, in all source code files equal to the
|
||||
# processor frequency in Hz. You can then use this symbol in your source code to
|
||||
# calculate timings. Do NOT tack on a 'UL' at the end, this will be done
|
||||
# automatically to create a 32-bit value in your source code.
|
||||
#
|
||||
# This will be an integer division of F_USB below, as it is sourced by
|
||||
# F_USB after it has run through any CPU prescalers. Note that this value
|
||||
# does not *change* the processor frequency - it should merely be updated to
|
||||
# reflect the processor speed set externally so that the code can use accurate
|
||||
# software delays.
|
||||
F_CPU = 16000000
|
||||
|
||||
#
|
||||
# LUFA specific
|
||||
#
|
||||
# Target architecture (see library "Board Types" documentation).
|
||||
ARCH = AVR8
|
||||
|
||||
# Input clock frequency.
|
||||
# This will define a symbol, F_USB, in all source code files equal to the
|
||||
# input clock frequency (before any prescaling is performed) in Hz. This value may
|
||||
# differ from F_CPU if prescaling is used on the latter, and is required as the
|
||||
# raw input clock is fed directly to the PLL sections of the AVR for high speed
|
||||
# clock generation for the USB and other AVR subsections. Do NOT tack on a 'UL'
|
||||
# at the end, this will be done automatically to create a 32-bit value in your
|
||||
# source code.
|
||||
#
|
||||
# If no clock division is performed on the input clock inside the AVR (via the
|
||||
# CPU clock adjust registers or the clock division fuses), this will be equal to F_CPU.
|
||||
F_USB = $(F_CPU)
|
||||
|
||||
# Bootloader
|
||||
# This definition is optional, and if your keyboard supports multiple bootloaders of
|
||||
# different sizes, comment this out, and the correct address will be loaded
|
||||
# automatically (+60). See bootloader.mk for all options.
|
||||
BOOTLOADER = caterina
|
||||
|
||||
# Interrupt driven control endpoint task(+60)
|
||||
OPT_DEFS += -DINTERRUPT_CONTROL_ENDPOINT
|
||||
|
||||
# Build Options
|
||||
# change to "no" to disable the options, or define them in the Makefile in
|
||||
# the appropriate keymap folder that will get included automatically
|
||||
#
|
||||
BOOTMAGIC_ENABLE = no # Virtual DIP switch configuration(+1000)
|
||||
MOUSEKEY_ENABLE = yes # Mouse keys(+4700)
|
||||
EXTRAKEY_ENABLE = yes # Audio control and System control(+450)
|
||||
CONSOLE_ENABLE = no # Console for debug(+400)
|
||||
COMMAND_ENABLE = yes # Commands for debug and configuration
|
||||
NKRO_ENABLE = no # Nkey Rollover - if this doesn't work, see here: https://github.com/tmk/tmk_keyboard/wiki/FAQ#nkro-doesnt-work
|
||||
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
|
||||
MIDI_ENABLE = no # MIDI controls
|
||||
AUDIO_ENABLE = no # Audio output on port C6
|
||||
UNICODE_ENABLE = no # Unicode
|
||||
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
|
||||
RGBLIGHT_ENABLE = yes # Enable WS2812 RGB underlight. Do not enable this with audio at the same time.
|
||||
SUBPROJECT_rev1 = yes
|
||||
USE_I2C = yes # I2C is used between the sides
|
||||
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
|
||||
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
|
||||
|
||||
CUSTOM_MATRIX = yes
|
||||
|
||||
DEFAULT_FOLDER = ergotravel/rev1
|
||||
|
|
@ -0,0 +1,228 @@
|
|||
/*
|
||||
* WARNING: be careful changing this code, it is very timing dependent
|
||||
*/
|
||||
|
||||
#ifndef F_CPU
|
||||
#define F_CPU 16000000
|
||||
#endif
|
||||
|
||||
#include <avr/io.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
#include <stdbool.h>
|
||||
#include "serial.h"
|
||||
|
||||
#ifndef USE_I2C
|
||||
|
||||
// Serial pulse period in microseconds. Its probably a bad idea to lower this
|
||||
// value.
|
||||
#define SERIAL_DELAY 24
|
||||
|
||||
uint8_t volatile serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH] = {0};
|
||||
uint8_t volatile serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH] = {0};
|
||||
|
||||
#define SLAVE_DATA_CORRUPT (1<<0)
|
||||
volatile uint8_t status = 0;
|
||||
|
||||
inline static
|
||||
void serial_delay(void) {
|
||||
_delay_us(SERIAL_DELAY);
|
||||
}
|
||||
|
||||
inline static
|
||||
void serial_output(void) {
|
||||
SERIAL_PIN_DDR |= SERIAL_PIN_MASK;
|
||||
}
|
||||
|
||||
// make the serial pin an input with pull-up resistor
|
||||
inline static
|
||||
void serial_input(void) {
|
||||
SERIAL_PIN_DDR &= ~SERIAL_PIN_MASK;
|
||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
|
||||
}
|
||||
|
||||
inline static
|
||||
uint8_t serial_read_pin(void) {
|
||||
return !!(SERIAL_PIN_INPUT & SERIAL_PIN_MASK);
|
||||
}
|
||||
|
||||
inline static
|
||||
void serial_low(void) {
|
||||
SERIAL_PIN_PORT &= ~SERIAL_PIN_MASK;
|
||||
}
|
||||
|
||||
inline static
|
||||
void serial_high(void) {
|
||||
SERIAL_PIN_PORT |= SERIAL_PIN_MASK;
|
||||
}
|
||||
|
||||
void serial_master_init(void) {
|
||||
serial_output();
|
||||
serial_high();
|
||||
}
|
||||
|
||||
void serial_slave_init(void) {
|
||||
serial_input();
|
||||
|
||||
// Enable INT0
|
||||
EIMSK |= _BV(INT0);
|
||||
// Trigger on falling edge of INT0
|
||||
EICRA &= ~(_BV(ISC00) | _BV(ISC01));
|
||||
}
|
||||
|
||||
// Used by the master to synchronize timing with the slave.
|
||||
static
|
||||
void sync_recv(void) {
|
||||
serial_input();
|
||||
// This shouldn't hang if the slave disconnects because the
|
||||
// serial line will float to high if the slave does disconnect.
|
||||
while (!serial_read_pin());
|
||||
serial_delay();
|
||||
}
|
||||
|
||||
// Used by the slave to send a synchronization signal to the master.
|
||||
static
|
||||
void sync_send(void) {
|
||||
serial_output();
|
||||
|
||||
serial_low();
|
||||
serial_delay();
|
||||
|
||||
serial_high();
|
||||
}
|
||||
|
||||
// Reads a byte from the serial line
|
||||
static
|
||||
uint8_t serial_read_byte(void) {
|
||||
uint8_t byte = 0;
|
||||
serial_input();
|
||||
for ( uint8_t i = 0; i < 8; ++i) {
|
||||
byte = (byte << 1) | serial_read_pin();
|
||||
serial_delay();
|
||||
_delay_us(1);
|
||||
}
|
||||
|
||||
return byte;
|
||||
}
|
||||
|
||||
// Sends a byte with MSB ordering
|
||||
static
|
||||
void serial_write_byte(uint8_t data) {
|
||||
uint8_t b = 8;
|
||||
serial_output();
|
||||
while( b-- ) {
|
||||
if(data & (1 << b)) {
|
||||
serial_high();
|
||||
} else {
|
||||
serial_low();
|
||||
}
|
||||
serial_delay();
|
||||
}
|
||||
}
|
||||
|
||||
// interrupt handle to be used by the slave device
|
||||
ISR(SERIAL_PIN_INTERRUPT) {
|
||||
sync_send();
|
||||
|
||||
uint8_t checksum = 0;
|
||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
|
||||
serial_write_byte(serial_slave_buffer[i]);
|
||||
sync_send();
|
||||
checksum += serial_slave_buffer[i];
|
||||
}
|
||||
serial_write_byte(checksum);
|
||||
sync_send();
|
||||
|
||||
// wait for the sync to finish sending
|
||||
serial_delay();
|
||||
|
||||
// read the middle of pulses
|
||||
_delay_us(SERIAL_DELAY/2);
|
||||
|
||||
uint8_t checksum_computed = 0;
|
||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
|
||||
serial_master_buffer[i] = serial_read_byte();
|
||||
sync_send();
|
||||
checksum_computed += serial_master_buffer[i];
|
||||
}
|
||||
uint8_t checksum_received = serial_read_byte();
|
||||
sync_send();
|
||||
|
||||
serial_input(); // end transaction
|
||||
|
||||
if ( checksum_computed != checksum_received ) {
|
||||
status |= SLAVE_DATA_CORRUPT;
|
||||
} else {
|
||||
status &= ~SLAVE_DATA_CORRUPT;
|
||||
}
|
||||
}
|
||||
|
||||
inline
|
||||
bool serial_slave_DATA_CORRUPT(void) {
|
||||
return status & SLAVE_DATA_CORRUPT;
|
||||
}
|
||||
|
||||
// Copies the serial_slave_buffer to the master and sends the
|
||||
// serial_master_buffer to the slave.
|
||||
//
|
||||
// Returns:
|
||||
// 0 => no error
|
||||
// 1 => slave did not respond
|
||||
int serial_update_buffers(void) {
|
||||
// this code is very time dependent, so we need to disable interrupts
|
||||
cli();
|
||||
|
||||
// signal to the slave that we want to start a transaction
|
||||
serial_output();
|
||||
serial_low();
|
||||
_delay_us(1);
|
||||
|
||||
// wait for the slaves response
|
||||
serial_input();
|
||||
serial_high();
|
||||
_delay_us(SERIAL_DELAY);
|
||||
|
||||
// check if the slave is present
|
||||
if (serial_read_pin()) {
|
||||
// slave failed to pull the line low, assume not present
|
||||
sei();
|
||||
return 1;
|
||||
}
|
||||
|
||||
// if the slave is present syncronize with it
|
||||
sync_recv();
|
||||
|
||||
uint8_t checksum_computed = 0;
|
||||
// receive data from the slave
|
||||
for (int i = 0; i < SERIAL_SLAVE_BUFFER_LENGTH; ++i) {
|
||||
serial_slave_buffer[i] = serial_read_byte();
|
||||
sync_recv();
|
||||
checksum_computed += serial_slave_buffer[i];
|
||||
}
|
||||
uint8_t checksum_received = serial_read_byte();
|
||||
sync_recv();
|
||||
|
||||
if (checksum_computed != checksum_received) {
|
||||
sei();
|
||||
return 1;
|
||||
}
|
||||
|
||||
uint8_t checksum = 0;
|
||||
// send data to the slave
|
||||
for (int i = 0; i < SERIAL_MASTER_BUFFER_LENGTH; ++i) {
|
||||
serial_write_byte(serial_master_buffer[i]);
|
||||
sync_recv();
|
||||
checksum += serial_master_buffer[i];
|
||||
}
|
||||
serial_write_byte(checksum);
|
||||
sync_recv();
|
||||
|
||||
// always, release the line when not in use
|
||||
serial_output();
|
||||
serial_high();
|
||||
|
||||
sei();
|
||||
return 0;
|
||||
}
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,26 @@
|
|||
#ifndef MY_SERIAL_H
|
||||
#define MY_SERIAL_H
|
||||
|
||||
#include "config.h"
|
||||
#include <stdbool.h>
|
||||
|
||||
/* TODO: some defines for interrupt setup */
|
||||
#define SERIAL_PIN_DDR DDRD
|
||||
#define SERIAL_PIN_PORT PORTD
|
||||
#define SERIAL_PIN_INPUT PIND
|
||||
#define SERIAL_PIN_MASK _BV(PD0)
|
||||
#define SERIAL_PIN_INTERRUPT INT0_vect
|
||||
|
||||
#define SERIAL_SLAVE_BUFFER_LENGTH MATRIX_ROWS/2
|
||||
#define SERIAL_MASTER_BUFFER_LENGTH 1
|
||||
|
||||
// Buffers for master - slave communication
|
||||
extern volatile uint8_t serial_slave_buffer[SERIAL_SLAVE_BUFFER_LENGTH];
|
||||
extern volatile uint8_t serial_master_buffer[SERIAL_MASTER_BUFFER_LENGTH];
|
||||
|
||||
void serial_master_init(void);
|
||||
void serial_slave_init(void);
|
||||
int serial_update_buffers(void);
|
||||
bool serial_slave_data_corrupt(void);
|
||||
|
||||
#endif
|
||||
|
|
@ -0,0 +1,86 @@
|
|||
#include <avr/io.h>
|
||||
#include <avr/wdt.h>
|
||||
#include <avr/power.h>
|
||||
#include <avr/interrupt.h>
|
||||
#include <util/delay.h>
|
||||
#include <avr/eeprom.h>
|
||||
#include "split_util.h"
|
||||
#include "matrix.h"
|
||||
#include "keyboard.h"
|
||||
#include "config.h"
|
||||
#include "timer.h"
|
||||
|
||||
#ifdef USE_I2C
|
||||
# include "i2c.h"
|
||||
#else
|
||||
# include "serial.h"
|
||||
#endif
|
||||
|
||||
volatile bool isLeftHand = true;
|
||||
|
||||
static void setup_handedness(void) {
|
||||
#ifdef EE_HANDS
|
||||
isLeftHand = eeprom_read_byte(EECONFIG_HANDEDNESS);
|
||||
#else
|
||||
// I2C_MASTER_RIGHT is deprecated, use MASTER_RIGHT instead, since this works for both serial and i2c
|
||||
#if defined(I2C_MASTER_RIGHT) || defined(MASTER_RIGHT)
|
||||
isLeftHand = !has_usb();
|
||||
#else
|
||||
isLeftHand = has_usb();
|
||||
#endif
|
||||
#endif
|
||||
}
|
||||
|
||||
static void keyboard_master_setup(void) {
|
||||
#ifdef USE_I2C
|
||||
i2c_master_init();
|
||||
#ifdef SSD1306OLED
|
||||
matrix_master_OLED_init ();
|
||||
#endif
|
||||
#else
|
||||
serial_master_init();
|
||||
#endif
|
||||
}
|
||||
|
||||
static void keyboard_slave_setup(void) {
|
||||
timer_init();
|
||||
#ifdef USE_I2C
|
||||
i2c_slave_init(SLAVE_I2C_ADDRESS);
|
||||
#else
|
||||
serial_slave_init();
|
||||
#endif
|
||||
}
|
||||
|
||||
bool has_usb(void) {
|
||||
USBCON |= (1 << OTGPADE); //enables VBUS pad
|
||||
_delay_us(5);
|
||||
return (USBSTA & (1<<VBUS)); //checks state of VBUS
|
||||
}
|
||||
|
||||
void split_keyboard_setup(void) {
|
||||
setup_handedness();
|
||||
|
||||
if (has_usb()) {
|
||||
keyboard_master_setup();
|
||||
} else {
|
||||
keyboard_slave_setup();
|
||||
}
|
||||
sei();
|
||||
}
|
||||
|
||||
void keyboard_slave_loop(void) {
|
||||
matrix_init();
|
||||
|
||||
while (1) {
|
||||
matrix_slave_scan();
|
||||
}
|
||||
}
|
||||
|
||||
// this code runs before the usb and keyboard is initialized
|
||||
void matrix_setup(void) {
|
||||
split_keyboard_setup();
|
||||
|
||||
if (!has_usb()) {
|
||||
keyboard_slave_loop();
|
||||
}
|
||||
}
|
||||
|
|
@ -0,0 +1,20 @@
|
|||
#ifndef SPLIT_KEYBOARD_UTIL_H
|
||||
#define SPLIT_KEYBOARD_UTIL_H
|
||||
|
||||
#include <stdbool.h>
|
||||
#include "eeconfig.h"
|
||||
|
||||
#define SLAVE_I2C_ADDRESS 0x32
|
||||
|
||||
extern volatile bool isLeftHand;
|
||||
|
||||
// slave version of matix scan, defined in matrix.c
|
||||
void matrix_slave_scan(void);
|
||||
|
||||
void split_keyboard_setup(void);
|
||||
bool has_usb(void);
|
||||
void keyboard_slave_loop(void);
|
||||
|
||||
void matrix_master_OLED_init (void);
|
||||
|
||||
#endif
|
||||
|
|
@ -1,83 +1,83 @@
|
|||
#include QMK_KEYBOARD_H
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
DYNAMIC_MACRO_RANGE,
|
||||
};
|
||||
|
||||
#include "dynamic_macro.h"
|
||||
|
||||
#define _______ KC_TRNS
|
||||
#define KC_REC DYN_REC_START1
|
||||
#define KC_DONE DYN_REC_STOP
|
||||
#define KC_PLAY DYN_MACRO_PLAY1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
LAYOUT(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT),
|
||||
|
||||
LAYOUT(
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, KC_PLAY, _______, KC_REC, KC_DONE, _______, _______, _______, _______, _______, _______),
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (!process_record_dynamic_macro(keycode, record)) {
|
||||
return false;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
DDRC |= (1 << 6); PORTC &= ~(1 << 6);
|
||||
} else {
|
||||
DDRC &= ~(1 << 6); PORTC &= ~(1 << 6);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRC |= (1 << 7); PORTC &= ~(1 << 7);
|
||||
} else {
|
||||
DDRC &= ~(1 << 7); PORTC &= ~(1 << 7);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
DDRB |= (1 << 5); PORTB &= ~(1 << 5);
|
||||
} else {
|
||||
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_COMPOSE)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_KANA)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
#include QMK_KEYBOARD_H
|
||||
|
||||
enum custom_keycodes {
|
||||
QWERTY = SAFE_RANGE,
|
||||
DYNAMIC_MACRO_RANGE,
|
||||
};
|
||||
|
||||
#include "dynamic_macro.h"
|
||||
|
||||
#define _______ KC_TRNS
|
||||
#define KC_REC DYN_REC_START1
|
||||
#define KC_DONE DYN_REC_STOP
|
||||
#define KC_PLAY DYN_MACRO_PLAY1
|
||||
|
||||
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
|
||||
|
||||
LAYOUT(
|
||||
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_PGUP, KC_PGDN, KC_DEL,
|
||||
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSLS, KC_BSPC, KC_NLCK, KC_PSLS, KC_PAST, KC_PMNS,
|
||||
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_PMNS,
|
||||
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN, KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS,
|
||||
KC_LSFT, KC_NUBS, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM, KC_DOT, KC_SLSH, KC_RSFT, KC_UP, KC_P1, KC_P2, KC_P3, KC_PENT,
|
||||
KC_LCTL, KC_LGUI, KC_LALT, KC_SPC, MO(1), KC_RALT, KC_RCTL, KC_LEFT, KC_DOWN, KC_RGHT, KC_P0, KC_PDOT, KC_PENT),
|
||||
|
||||
LAYOUT(
|
||||
RESET, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, KC_MUTE, KC_VOLD, KC_VOLU, _______, _______, _______,
|
||||
_______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, RGB_TOG, _______, RGB_MOD, RGB_HUI, RGB_HUD, RGB_SAI, RGB_SAD, RGB_VAI, RGB_VAD, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
BL_TOGG, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, _______, BL_DEC, BL_TOGG, BL_INC, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______, _______,
|
||||
_______, _______, _______, KC_PLAY, _______, KC_REC, KC_DONE, _______, _______, _______, _______, _______, _______),
|
||||
};
|
||||
|
||||
const macro_t *action_get_macro(keyrecord_t *record, uint8_t id, uint8_t opt) {
|
||||
return MACRO_NONE;
|
||||
}
|
||||
|
||||
void matrix_init_user(void) {
|
||||
}
|
||||
|
||||
void matrix_scan_user(void) {
|
||||
}
|
||||
|
||||
bool process_record_user(uint16_t keycode, keyrecord_t *record) {
|
||||
if (!process_record_dynamic_macro(keycode, record)) {
|
||||
return false;
|
||||
}
|
||||
return true;
|
||||
}
|
||||
|
||||
void led_set_user(uint8_t usb_led) {
|
||||
|
||||
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
|
||||
DDRC |= (1 << 6); PORTC &= ~(1 << 6);
|
||||
} else {
|
||||
DDRC &= ~(1 << 6); PORTC &= ~(1 << 6);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
|
||||
DDRC |= (1 << 7); PORTC &= ~(1 << 7);
|
||||
} else {
|
||||
DDRC &= ~(1 << 7); PORTC &= ~(1 << 7);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
|
||||
DDRB |= (1 << 5); PORTB &= ~(1 << 5);
|
||||
} else {
|
||||
DDRB &= ~(1 << 5); PORTB &= ~(1 << 5);
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_COMPOSE)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
if (usb_led & (1 << USB_LED_KANA)) {
|
||||
|
||||
} else {
|
||||
|
||||
}
|
||||
|
||||
}
|
||||
|
|
|
|||
Loading…
Reference in New Issue