Move Bluetooth config to common_features.mk (#14404)

* Move Bluetooth config to common_features.mk

* Update common_features.mk

Co-authored-by: Drashna Jaelre <drashna@live.com>

Co-authored-by: Drashna Jaelre <drashna@live.com>
master
Ryan 2021-09-13 01:22:03 +10:00 committed by GitHub
parent 0fa217a5b7
commit bcf4551f74
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
31 changed files with 78 additions and 99 deletions

View File

@ -745,3 +745,26 @@ ifeq ($(strip $(USBPD_ENABLE)), yes)
endif
endif
endif
BLUETOOTH_ENABLE ?= no
VALID_BLUETOOTH_DRIVER_TYPES = AdafruitBLE RN42 custom
ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
ifeq ($(filter $(strip $(BLUETOOTH_DRIVER)),$(VALID_BLUETOOTH_DRIVER_TYPES)),)
$(error "$(BLUETOOTH_DRIVER)" is not a valid Bluetooth driver type)
endif
OPT_DEFS += -DBLUETOOTH_ENABLE
NO_USB_STARTUP_CHECK := yes
SRC += outputselect.c
ifeq ($(strip $(BLUETOOTH_DRIVER)), AdafruitBLE)
OPT_DEFS += -DMODULE_ADAFRUIT_BLE
SRC += analog.c
SRC += $(LUFA_DIR)/adafruit_ble.cpp
QUANTUM_LIB_SRC += spi_master.c
endif
ifeq ($(strip $(BLUETOOTH_DRIVER)), RN42)
OPT_DEFS += DMODULE_RN42
SRC += $(TMK_DIR)/protocol/serial_uart.c
endif
endif

View File

@ -1,7 +1,6 @@
# Unconditionally disable features that a keyboard advertises it doesn't support
FEATURE_NAMES :=
FEATURE_NAMES += ADAFRUIT_BLE
FEATURE_NAMES += AUDIO
FEATURE_NAMES += BACKLIGHT
FEATURE_NAMES += BLUETOOTH

View File

@ -4,10 +4,10 @@
Currently Bluetooth support is limited to AVR based chips. For Bluetooth 2.1, QMK has support for RN-42 modules. For more recent BLE protocols, currently only the Adafruit Bluefruit SPI Friend is directly supported. BLE is needed to connect to iOS devices. Note iOS does not support mouse input.
|Board |Bluetooth Protocol |Connection Type |rules.mk |Bluetooth Chip|
|----------------------------------------------------------------|----------------------------|----------------|---------------------------|--------------|
|Roving Networks RN-42 (Sparkfun Bluesmirf) |Bluetooth Classic | UART |`BLUETOOTH = RN42` | RN-42 |
|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy | SPI |`BLUETOOTH = AdafruitBLE` | nRF51822 |
|Board |Bluetooth Protocol |Connection Type|rules.mk |Bluetooth Chip|
|----------------------------------------------------------------|--------------------|---------------|--------------------------------|--------------|
|Roving Networks RN-42 (Sparkfun Bluesmirf) |Bluetooth Classic |UART |`BLUETOOTH_DRIVER = RN42` |RN-42 |
|[Bluefruit LE SPI Friend](https://www.adafruit.com/product/2633)|Bluetooth Low Energy|SPI |`BLUETOOTH_DRIVER = AdafruitBLE`|nRF51822 |
Not Supported Yet but possible:
* [Bluefruit LE UART Friend](https://www.adafruit.com/product/2479). [Possible tmk implementation found in](https://github.com/tmk/tmk_keyboard/issues/514)
@ -23,16 +23,17 @@ Currently The only bluetooth chipset supported by QMK is the Adafruit Bluefruit
A Bluefruit UART friend can be converted to an SPI friend, however this [requires](https://github.com/qmk/qmk_firmware/issues/2274) some reflashing and soldering directly to the MDBT40 chip.
<!-- FIXME: Document bluetooth support more completely. -->
## Bluetooth Rules.mk Options
The currently supported Bluetooth chipsets do not support [N-Key Rollover (NKRO)](reference_glossary.md#n-key-rollover-nkro), so `rules.mk` must contain `NKRO_ENABLE = no`.
Use only one of these to enable Bluetooth:
* BLUETOOTH_ENABLE = yes (Legacy Option)
* BLUETOOTH = RN42
* BLUETOOTH = AdafruitBLE
Add the following to your `rules.mk`:
```makefile
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE # or RN42
```
## Bluetooth Keycodes

View File

@ -21,9 +21,9 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
OLED_ENABLE = yes
OLED_DRIVER = SSD1306
ENCODER_ENABLE = yes

View File

@ -4,5 +4,6 @@ F_CPU = 8000000
# Build Options
# change yes to no to disable
#
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
BACKLIGHT_ENABLE = no

View File

@ -10,5 +10,6 @@ BOOTLOADER = caterina
# Build Options
# change yes to no to disable
#
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
CONSOLE_ENABLE = no

View File

@ -16,7 +16,6 @@ NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA
EXTRAKEY_ENABLE = yes
USB_HID_ENABLE = yes
BACKLIGHT_ENABLE = no
#BLUETOOTH = AdafruitBLE # For Adafruit Feather 32U4 BLE support, uncomment this line
CUSTOM_MATRIX = yes
SRC = matrix.c adb.c led.c

View File

@ -19,7 +19,6 @@ NKRO_ENABLE = no # USB Nkey Rollover - not yet supported in LUFA
EXTRAKEY_ENABLE = yes
USB_HID_ENABLE = yes
BACKLIGHT_ENABLE = no
#BLUETOOTH = AdafruitBLE # For Adafruit Feather 32U4 BLE support, uncomment this line
CUSTOM_MATRIX = yes
SRC = matrix.c m0110.c

View File

@ -13,9 +13,9 @@ NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
BLUETOOTH = AdafruitBLE
ADAFRUIT_BLE_ENABLE = yes
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
EXTRAFLAGS += -flto

View File

@ -26,4 +26,5 @@ AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
UNICODEMAP_ENABLE = no # ^^
UCIS_ENABLE = no # ^^
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE

View File

@ -22,6 +22,7 @@ NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode
BLUETOOTH = AdafruitBLE # Enable Bluetooth
AUDIO_ENABLE = no # Audio output on port C6
ENCODER_ENABLE = no
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE

View File

@ -22,8 +22,8 @@ NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
LAYOUTS = 60_tsangan_hhkb

View File

@ -19,7 +19,8 @@ NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = yes # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
NO_USB_STARTUP_CHECK = yes # Disable initialization only when usb is plugged in
BLUETOOTH = RN42
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = RN42

View File

@ -10,7 +10,6 @@ BOOTLOADER = caterina
# Build Options
# change yes to no to disable
#
BLUETOOTH = AdafruitBLE
BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite
ENCODER_ENABLE = yes
MOUSEKEY_ENABLE = no # Mouse keys
@ -22,3 +21,6 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here
BACKLIGHT_ENABLE = no
AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
RGBLIGHT_ENABLE = no # This can be enabled if a ws2812 strip is connected to the expansion port.
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE

View File

@ -15,11 +15,9 @@ MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
UNICODEMAP_ENABLE = yes
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
PS2_MOUSE_ENABLE = yes
PS2_USE_INT = yes
BLUETOOTH = AdafruitBLE
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View File

@ -15,11 +15,9 @@ MIDI_ENABLE = no # MIDI controls
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
UNICODEMAP_ENABLE = yes
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
PS2_MOUSE_ENABLE = yes
PS2_USE_INT = yes
BLUETOOTH = AdafruitBLE
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View File

@ -21,12 +21,12 @@ BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
AUDIO_ENABLE = no # Audio output on port C6
UNICODE_ENABLE = no # Unicode
UNICODEMAP_ENABLE = yes
BLUETOOTH_ENABLE = no # Enable Bluetooth with the Adafruit EZ-Key HID
RGBLIGHT_ENABLE = no # Enable WS2812 RGB underlight.
PS2_MOUSE_ENABLE = yes
PS2_USE_INT = yes
CUSTOM_MATRIX = yes
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend

View File

@ -21,11 +21,11 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = yes # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
BLUETOOTH = AdafruitBLE
UNICODE_ENABLE = yes
CUSTOM_MATRIX = yes
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
SRC += matrix.c
QUANTUM_LIB_SRC += i2c_master.c

View File

@ -22,6 +22,6 @@ NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode
#BLUETOOTH_ENABLE = Yes # Enable Bluetooth with the Adafruit EZ-Key HID
BLUETOOTH = AdafruitBLE
AUDIO_ENABLE = no # Audio output on port C6
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE

View File

@ -25,5 +25,5 @@ TAP_DANCE_ENABLE = no
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
BLUETOOTH_ENABLE = no # Legacy bluetooth support
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE

View File

@ -21,8 +21,8 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
LAYOUTS = planck_mit

View File

@ -21,6 +21,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE

View File

@ -21,10 +21,10 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = yes # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
OLED_ENABLE = yes
OLED_DRIVER = SSD1306
ENCODER_ENABLE = yes

View File

@ -2,4 +2,4 @@
F_CPU = 8000000
BLUETOOTH_ENABLE = yes
BLUETOOTH = AdafruitBLE
BLUETOOTH_DRIVER = AdafruitBLE

View File

@ -19,10 +19,10 @@ NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality on B7 by default
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
UNICODE_ENABLE = no # Unicode
BLUETOOTH_ENABLE = yes # Enable Bluetooth with the Adafruit EZ-Key HID
AUDIO_ENABLE = no # Audio output on port C6
CUSTOM_MATRIX = yes
DEBUG_ENABLE = yes
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
SRC += matrix.c mcp23017.c

View File

@ -10,7 +10,6 @@ BOOTLOADER = caterina
# Build Options
# comment out to disable the options.
#
BLUETOOTH = AdafruitBLE
BOOTMAGIC_ENABLE = lite # Enable Bootmagic Lite
MOUSEKEY_ENABLE = no # Mouse keys
EXTRAKEY_ENABLE = yes # Audio control and System control
@ -21,6 +20,8 @@ NKRO_ENABLE = yes # USB Nkey Rollover - if this doesn't work, see here: https:
BACKLIGHT_ENABLE = no # Custom backlighting code is used, so this should not be enabled
AUDIO_ENABLE = no # This can be enabled if a speaker is connected to the expansion port. Not compatible with RGBLIGHT below
RGBLIGHT_ENABLE = no # This can be enabled if a ws2812 strip is connected to the expansion port.
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
LAYOUTS = ortho_4x12 planck_mit

View File

@ -21,6 +21,6 @@ SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
NKRO_ENABLE = no # USB Nkey Rollover
BACKLIGHT_ENABLE = no # Enable keyboard backlight functionality
RGBLIGHT_ENABLE = no # Enable keyboard RGB underglow
BLUETOOTH_ENABLE = no # Enable Bluetooth
AUDIO_ENABLE = no # Audio output
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE

View File

@ -25,6 +25,7 @@ HARDWARE_OPTION_NAMES = \
CIE1931_CURVE \
MIDI_ENABLE \
BLUETOOTH_ENABLE \
BLUETOOTH_DRIVER \
AUDIO_ENABLE \
HD44780_ENABLE \
ENCODER_ENABLE \
@ -57,7 +58,6 @@ OTHER_OPTION_NAMES = \
LED_ANIMATIONS \
IOS_DEVICE_ENABLE \
HELIX ZINC \
ADAFRUIT_BLE_ENABLE \
AUTOLOG_ENABLE \
DEBUG_ENABLE \
ENCODER_ENABLE_CUSTOM \

View File

@ -55,8 +55,6 @@ ifeq ($(strip $(NKRO_ENABLE)), yes)
$(info NKRO is not currently supported on V-USB, and has been disabled.)
else ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
$(info NKRO is not currently supported with Bluetooth, and has been disabled.)
else ifneq ($(BLUETOOTH),)
$(info NKRO is not currently supported with Bluetooth, and has been disabled.)
else
TMK_COMMON_DEFS += -DNKRO_ENABLE
SHARED_EP_ENABLE = yes
@ -77,23 +75,6 @@ ifeq ($(strip $(NO_SUSPEND_POWER_DOWN)), yes)
TMK_COMMON_DEFS += -DNO_SUSPEND_POWER_DOWN
endif
ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE
TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK
endif
ifeq ($(strip $(BLUETOOTH)), AdafruitBLE)
TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE
TMK_COMMON_DEFS += -DMODULE_ADAFRUIT_BLE
TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK
endif
ifeq ($(strip $(BLUETOOTH)), RN42)
TMK_COMMON_DEFS += -DBLUETOOTH_ENABLE
TMK_COMMON_DEFS += -DMODULE_RN42
TMK_COMMON_DEFS += -DNO_USB_STARTUP_CHECK
endif
ifeq ($(strip $(SWAP_HANDS_ENABLE)), yes)
TMK_COMMON_DEFS += -DSWAP_HANDS_ENABLE
endif

View File

@ -3,7 +3,6 @@ LUFA_DIR = protocol/lufa
# Path to the LUFA library
LUFA_PATH = $(LIB_PATH)/lufa
# Create the LUFA source path variables by including the LUFA makefile
ifneq (, $(wildcard $(LUFA_PATH)/LUFA/Build/lufa_sources.mk))
# New build system from 20120730
@ -22,23 +21,6 @@ ifeq ($(strip $(MIDI_ENABLE)), yes)
include $(TMK_PATH)/protocol/midi.mk
endif
ifeq ($(strip $(BLUETOOTH_ENABLE)), yes)
LUFA_SRC += outputselect.c \
$(TMK_DIR)/protocol/serial_uart.c
endif
ifeq ($(strip $(BLUETOOTH)), AdafruitBLE)
LUFA_SRC += spi_master.c \
analog.c \
outputselect.c \
$(LUFA_DIR)/adafruit_ble.cpp
endif
ifeq ($(strip $(BLUETOOTH)), RN42)
LUFA_SRC += outputselect.c \
$(TMK_DIR)/protocol/serial_uart.c
endif
ifeq ($(strip $(VIRTSER_ENABLE)), yes)
LUFA_SRC += $(LUFA_ROOT_PATH)/Drivers/USB/Class/Device/CDCClassDevice.c
endif
@ -50,19 +32,10 @@ SRC += $(LUFA_DIR)/usb_util.c
VPATH += $(TMK_PATH)/$(LUFA_DIR)
VPATH += $(LUFA_PATH)
# Option modules
#ifdef $(or MOUSEKEY_ENABLE, PS2_MOUSE_ENABLE)
#endif
#ifdef EXTRAKEY_ENABLE
#endif
# LUFA library compile-time options and predefined tokens
LUFA_OPTS = -DUSB_DEVICE_ONLY
LUFA_OPTS += -DUSE_FLASH_DESCRIPTORS
LUFA_OPTS += -DUSE_STATIC_OPTIONS="(USB_DEVICE_OPT_FULLSPEED | USB_OPT_REG_ENABLED | USB_OPT_AUTO_PLL)"
#LUFA_OPTS += -DINTERRUPT_CONTROL_ENDPOINT
LUFA_OPTS += -DFIXED_CONTROL_ENDPOINT_SIZE=8
LUFA_OPTS += -DFIXED_CONTROL_ENDPOINT_SIZE=8
LUFA_OPTS += -DFIXED_NUM_CONFIGURATIONS=1

View File

@ -21,8 +21,8 @@ ifeq ($(strip $(BT)), yes)
#opt_defs for alternate pin usage
OPT_DEFS += -DBLUEFRUIT
#Adafruit Bluefruit controller settings
BLUETOOTH = AdafruitBLE
BLUETOOTH_ENABLE = yes
BLUETOOTH_DRIVER = AdafruitBLE
F_CPU = 8000000
CONSOLE_ENABLE = no # Console for debug(+400)
COMMAND_ENABLE = no # Commands for debug and configuration
@ -42,4 +42,4 @@ endif
#example usage: make gherkin:wanleg flip=yes
ifeq ($(strip $(flip)), yes)
OPT_DEFS += -DFLIP
endif
endif