YMD96 complete QMK port (#3105)

* readded code for YMD96 full working

* added jj50 layout back
master
Harshit Goel 2018-06-02 00:37:49 +05:30 committed by Drashna Jaelre
parent 74d86832c3
commit b36a1ef61b
17 changed files with 650 additions and 43 deletions

View File

@ -17,6 +17,8 @@ Keyboard maintainer: [Andrew](https://github.com/sparkyman215)
Hardware Supported: YMD96 with the ATmega32a chip.
Hardware Availability: The GB was run June 2017, [in this thread](https://www.reddit.com/r/mechmarket/comments/6hu3yx/vendor_ymd96_gb_is_now_live_68_an_universal_and/). The vendor has stated that they plan on selling more rounds.
A very big thanks to @krusli for making the RGB underglow, Backlight, CapsLock and NumLock LEDs working correctly.
## Finding your specific matrix
This firmware was modified from [ps2avrGB](https://github.com/qmk/qmk_firmware/tree/master/keyboards/ps2avrGB), also found on this qmk repo, to work with the YMD96 keyboard. However, I only have one board to test with, which might have a different layout than yours. To get qmk working with your specific layout, you'll need to follow these steps:

View File

@ -0,0 +1,213 @@
/**
* Backlighting code for PS2AVRGB boards (ATMEGA32A)
* Kenneth A. (github.com/krusli | krusli.me)
*/
#include "backlight.h"
#include "quantum.h"
#include <avr/pgmspace.h>
#include <avr/interrupt.h>
#include "backlight_custom.h"
#include "breathing_custom.h"
// DEBUG
#include <stdlib.h>
#include <stdio.h>
// Port D: digital pins of the AVR chipset
#define NUMLOCK_PORT (1 << 0) // 0th pin of Port D (digital)
#define CAPSLOCK_PORT (1 << 1) // 1st pin
#define BACKLIGHT_PORT (1 << 4) // 4th pin
//#define SCROLLLOCK_PORT (1 << 6) // 6th pin
#define TIMER_CLK_DIV64 0x03 ///< Timer clocked at F_CPU/64
#define TIMER1PRESCALE TIMER_CLK_DIV64 ///< timer 1 prescaler default
#define TIMER_PRESCALE_MASK 0x07 ///< Timer Prescaler Bit-Mask
#define PWM_MAX 0xFF
#define TIMER_TOP 255 // 8 bit PWM
extern backlight_config_t backlight_config;
/**
* References
* Port Registers: https://www.arduino.cc/en/Reference/PortManipulation
* TCCR1A: https://electronics.stackexchange.com/questions/92350/what-is-the-difference-between-tccr1a-and-tccr1b
* Timers: http://www.avrbeginners.net/architecture/timers/timers.html
* 16-bit timer setup: http://sculland.com/ATmega168/Interrupts-And-Timers/16-Bit-Timer-Setup/
* PS2AVRGB firmware: https://github.com/showjean/ps2avrU/tree/master/firmware
*/
// @Override
// turn LEDs on and off depending on USB caps/num/scroll lock states.
void led_set_user(uint8_t usb_led) {
if (usb_led & (1 << USB_LED_NUM_LOCK)) {
// turn on
DDRD |= NUMLOCK_PORT;
PORTD |= NUMLOCK_PORT;
} else {
// turn off
DDRD &= ~NUMLOCK_PORT;
PORTD &= ~NUMLOCK_PORT;
}
if (usb_led & (1 << USB_LED_CAPS_LOCK)) {
DDRD |= CAPSLOCK_PORT;
PORTD |= CAPSLOCK_PORT;
} else {
DDRD &= ~CAPSLOCK_PORT;
PORTD &= ~CAPSLOCK_PORT;
}
/* YMD96 does not have scroll lock led
if (usb_led & (1 << USB_LED_SCROLL_LOCK)) {
DDRD |= SCROLLLOCK_PORT;
PORTD |= SCROLLLOCK_PORT;
} else {
DDRD &= ~SCROLLLOCK_PORT;
PORTD &= ~SCROLLLOCK_PORT;
}*/
}
#ifdef BACKLIGHT_ENABLE
// sets up Timer 1 for 8-bit PWM
void timer1PWMSetup(void) { // NOTE ONLY CALL THIS ONCE
// default 8 bit mode
TCCR1A &= ~(1 << 1); // cbi(TCCR1A,PWM11); <- set PWM11 bit to HIGH
TCCR1A |= (1 << 0); // sbi(TCCR1A,PWM10); <- set PWM10 bit to LOW
// clear output compare value A
// outb(OCR1AH, 0);
// outb(OCR1AL, 0);
// clear output comparator registers for B
OCR1BH = 0; // outb(OCR1BH, 0);
OCR1BL = 0; // outb(OCR1BL, 0);
}
bool is_init = false;
void timer1Init(void) {
// timer1SetPrescaler(TIMER1PRESCALE)
// set to DIV/64
(TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | TIMER1PRESCALE;
// reset TCNT1
TCNT1H = 0; // outb(TCNT1H, 0);
TCNT1L = 0; // outb(TCNT1L, 0);
// TOIE1: Timer Overflow Interrupt Enable (Timer 1);
TIMSK |= _BV(TOIE1); // sbi(TIMSK, TOIE1);
is_init = true;
}
void timer1UnInit(void) {
// set prescaler back to NONE
(TCCR1B) = ((TCCR1B) & ~TIMER_PRESCALE_MASK) | 0x00; // TIMERRTC_CLK_STOP
// disable timer overflow interrupt
TIMSK &= ~_BV(TOIE1); // overflow bit?
setPWM(0);
is_init = false;
}
// handle TCNT1 overflow
//! Interrupt handler for tcnt1 overflow interrupt
ISR(TIMER1_OVF_vect, ISR_NOBLOCK)
{
// sei();
// handle breathing here
#ifdef BACKLIGHT_BREATHING
if (is_breathing()) {
custom_breathing_handler();
}
#endif
// TODO call user defined function
}
// enable timer 1 PWM
// timer1PWMBOn()
void timer1PWMBEnable(void) {
// turn on channel B (OC1B) PWM output
// set OC1B as non-inverted PWM
TCCR1A |= _BV(COM1B1);
TCCR1A &= ~_BV(COM1B0);
}
// disable timer 1 PWM
// timer1PWMBOff()
void timer1PWMBDisable(void) {
TCCR1A &= ~_BV(COM1B1);
TCCR1A &= ~_BV(COM1B0);
}
void enableBacklight(void) {
DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
}
void disableBacklight(void) {
// DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
}
void startPWM(void) {
timer1Init();
timer1PWMBEnable();
enableBacklight();
}
void stopPWM(void) {
timer1UnInit();
disableBacklight();
timer1PWMBDisable();
}
void b_led_init_ports(void) {
/* turn backlight on/off depending on user preference */
#if BACKLIGHT_ON_STATE == 0
// DDRx register: sets the direction of Port D
// DDRD &= ~BACKLIGHT_PORT; // set digital pin 4 as input
PORTD &= ~BACKLIGHT_PORT; // set digital pin 4 to low
#else
DDRD |= BACKLIGHT_PORT; // set digital pin 4 as output
PORTD |= BACKLIGHT_PORT; // set digital pin 4 to high
#endif
timer1PWMSetup();
startPWM();
#ifdef BACKLIGHT_BREATHING
breathing_enable();
#endif
}
void b_led_set(uint8_t level) {
if (level > BACKLIGHT_LEVELS) {
level = BACKLIGHT_LEVELS;
}
setPWM((int)(TIMER_TOP * (float) level / BACKLIGHT_LEVELS));
}
// called every matrix scan
void b_led_task(void) {
// do nothing for now
}
void setPWM(uint16_t xValue) {
if (xValue > TIMER_TOP) {
xValue = TIMER_TOP;
}
OCR1B = xValue; // timer1PWMBSet(xValue);
}
#endif // BACKLIGHT_ENABLE

View File

@ -0,0 +1,15 @@
/**
* Backlighting code for PS2AVRGB boards (ATMEGA32A)
* Kenneth A. (github.com/krusli | krusli.me)
*/
#ifndef BACKLIGHT_CUSTOM_H
#define BACKLIGHT_CUSTOM_H
#include <avr/pgmspace.h>
void b_led_init_ports(void);
void b_led_set(uint8_t level);
void b_led_task(void);
void setPWM(uint16_t xValue);
#endif // BACKLIGHT_CUSTOM_H

View File

@ -0,0 +1,140 @@
/**
* Breathing effect code for PS2AVRGB boards (ATMEGA32A)
* Works in conjunction with `backlight.c`.
*
* Code adapted from `quantum.c` to register with the existing TIMER1 overflow
* handler in `backlight.c` instead of setting up its own timer.
* Kenneth A. (github.com/krusli | krusli.me)
*/
#ifdef BACKLIGHT_ENABLE
#ifdef BACKLIGHT_BREATHING
#include "backlight_custom.h"
#ifndef BREATHING_PERIOD
#define BREATHING_PERIOD 6
#endif
#define breathing_min() do {breathing_counter = 0;} while (0)
#define breathing_max() do {breathing_counter = breathing_period * 244 / 2;} while (0)
// TODO make this share code with quantum.c
#define BREATHING_NO_HALT 0
#define BREATHING_HALT_OFF 1
#define BREATHING_HALT_ON 2
#define BREATHING_STEPS 128
static uint8_t breathing_period = BREATHING_PERIOD;
static uint8_t breathing_halt = BREATHING_NO_HALT;
static uint16_t breathing_counter = 0;
static bool breathing = false;
bool is_breathing(void) {
return breathing;
}
// See http://jared.geek.nz/2013/feb/linear-led-pwm
static uint16_t cie_lightness(uint16_t v) {
if (v <= 5243) // if below 8% of max
return v / 9; // same as dividing by 900%
else {
uint32_t y = (((uint32_t) v + 10486) << 8) / (10486 + 0xFFFFUL); // add 16% of max and compare
// to get a useful result with integer division, we shift left in the expression above
// and revert what we've done again after squaring.
y = y * y * y >> 8;
if (y > 0xFFFFUL) // prevent overflow
return 0xFFFFU;
else
return (uint16_t) y;
}
}
void breathing_enable(void) {
breathing = true;
breathing_counter = 0;
breathing_halt = BREATHING_NO_HALT;
// interrupt already registered
}
void breathing_pulse(void) {
if (get_backlight_level() == 0)
breathing_min();
else
breathing_max();
breathing_halt = BREATHING_HALT_ON;
// breathing_interrupt_enable();
breathing = true;
}
void breathing_disable(void) {
breathing = false;
// backlight_set(get_backlight_level());
b_led_set(get_backlight_level()); // custom implementation of backlight_set()
}
void breathing_self_disable(void)
{
if (get_backlight_level() == 0)
breathing_halt = BREATHING_HALT_OFF;
else
breathing_halt = BREATHING_HALT_ON;
}
void breathing_toggle(void) {
if (is_breathing())
breathing_disable();
else
breathing_enable();
}
void breathing_period_set(uint8_t value)
{
if (!value)
value = 1;
breathing_period = value;
}
void breathing_period_default(void) {
breathing_period_set(BREATHING_PERIOD);
}
void breathing_period_inc(void)
{
breathing_period_set(breathing_period+1);
}
void breathing_period_dec(void)
{
breathing_period_set(breathing_period-1);
}
/* To generate breathing curve in python:
* from math import sin, pi; [int(sin(x/128.0*pi)**4*255) for x in range(128)]
*/
static const uint8_t breathing_table[BREATHING_STEPS] PROGMEM = {0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 1, 1, 2, 3, 4, 5, 6, 8, 10, 12, 15, 17, 20, 24, 28, 32, 36, 41, 46, 51, 57, 63, 70, 76, 83, 91, 98, 106, 113, 121, 129, 138, 146, 154, 162, 170, 178, 185, 193, 200, 207, 213, 220, 225, 231, 235, 240, 244, 247, 250, 252, 253, 254, 255, 254, 253, 252, 250, 247, 244, 240, 235, 231, 225, 220, 213, 207, 200, 193, 185, 178, 170, 162, 154, 146, 138, 129, 121, 113, 106, 98, 91, 83, 76, 70, 63, 57, 51, 46, 41, 36, 32, 28, 24, 20, 17, 15, 12, 10, 8, 6, 5, 4, 3, 2, 1, 1, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0};
// Use this before the cie_lightness function.
static inline uint16_t scale_backlight(uint16_t v) {
return v / BACKLIGHT_LEVELS * get_backlight_level();
}
void custom_breathing_handler(void) {
uint16_t interval = (uint16_t) breathing_period * 244 / BREATHING_STEPS;
// resetting after one period to prevent ugly reset at overflow.
breathing_counter = (breathing_counter + 1) % (breathing_period * 244);
uint8_t index = breathing_counter / interval % BREATHING_STEPS;
if (((breathing_halt == BREATHING_HALT_ON) && (index == BREATHING_STEPS / 2)) ||
((breathing_halt == BREATHING_HALT_OFF) && (index == BREATHING_STEPS - 1)))
{
// breathing_interrupt_disable();
}
setPWM(cie_lightness(scale_backlight((uint16_t) pgm_read_byte(&breathing_table[index]) * 0x0101U)));
}
#endif // BACKLIGHT_BREATHING
#endif // BACKLIGHT_ENABLE

View File

@ -1,7 +1,7 @@
/*
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
Modified 2018 Harshit Goel <Harshitgoel96@yahoo.com>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
@ -16,6 +16,8 @@ You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "config_common.h"
#ifndef CONFIG_H
#define CONFIG_H
@ -29,15 +31,29 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
/* matrix size */
#define MATRIX_ROWS 8
#define MATRIX_COLS 15
#define DIODE_DIRECTION ROW2COL
//#define DIODE_DIRECTION ROW2COL
#define RGB_DI_PIN C4
#define RGBLED_NUM 18
#define RGBLIGHT_ANIMATIONS
#define RGBLIGHT_VAL_STEP 20
//#define RGB_DI_PIN C4
/* COL2ROW or ROW2COL */
#define DIODE_DIRECTION COL2ROW
#define BACKLIGHT_LEVELS 12
// #define BACKLIGHT_BREATHING // works, but BL_TOGG might not work
#define TAPPING_TOGGLE 3
#define NO_UART 1
#define BOOTLOADHID_BOOTLOADER 1
/* RGB underglow */
// The RGB_DI_PIN value seems to be shared between all PS2AVRGB boards.
// The same pin is used on the JJ40, at least.
#define RGBLED_NUM 18
#define RGB_DI_PIN E2 // NOTE: for PS2AVRGB boards, underglow commands are sent via I2C to 0xB0.
#define RGBLIGHT_ANIMATIONS
/*#define RGBLIGHT_VAL_STEP 20
#define NO_UART 1
#define BOOTLOADHID_BOOTLOADER 1*/
/* key combination for command */
#define IS_COMMAND() (keyboard_report->mods == (MOD_BIT(KC_LSHIFT) | MOD_BIT(KC_RSHIFT)))

View File

@ -24,6 +24,8 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#define _DEFLT 0
#define _RAISE 1
#define KEYMAP KEYMAP_DEFAULT
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0, default layer

View File

@ -0,0 +1,9 @@
#ifndef CONFIG_USER_H
#define CONFIG_USER_H
#include "../../config.h"
#define PREVENT_STUCK_MODIFIERS
#define TAPPING_TERM 300
#endif

View File

@ -0,0 +1,67 @@
#include "ymd96.h"
#include "action_layer.h"
/*
#define _QWERTY 0
#define _LOWER 1
#define _RAISE 2*/
/*
enum custom_keycodes {
QWERTY = SAFE_RANGE,
LOWER,
RAISE,
};*/
void matrix_scan_user(void) {
// runs at every matrix scan.
}
enum {
TD_H_E = 0
};
qk_tap_dance_action_t tap_dance_actions[] = {
[TD_H_E] = ACTION_TAP_DANCE_DOUBLE(KC_HOME, KC_END)
};
#define ______ KC_TRNS
#define _DEFLT 0
#define _RAISE 1
#define KEYMAP KEYMAP_CUSTOM
const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
/* Layer 0, default layer
* | Esc | F1 | F2 | F3 | F4 | F5 | F6 | F7 | F8 | F9 | F10 | F11 | F12 |Print | Home | End |Insert|Delete| PgUp | 19 keys
* | ~` | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | 0 | - | = | BkSpc |NumLck| / | * | PgDn | 18 keys
* | Tab | Q | W | E | R | T | Y | U | I | O | P | { | } | \ | 7 | 8 | 9 | - | 18 keys
* | Caps | A | S | D | F | G | H | J | K | L | ; | ' | Return | 4 | 5 | 6 | + | 17 keys
* | LShft | Z | X | C | V | B | N | M | , | . | / | RShft | 1 | 2 | 3 | En | 16 keys
* | Ctrl | Win | Alt | Space | Fn | Win | Left | Down | Up | Right| 0 | . | | 12 keys
*/
[_DEFLT] = KEYMAP(
KC_ESC, KC_F1, KC_F2, KC_F3, KC_F4, KC_F5, KC_F6, KC_F7, KC_F8, KC_F9, KC_F10, KC_F11, KC_F12, KC_PSCR, KC_HOME, KC_END, KC_INSERT, KC_DELETE, KC_PGUP, \
KC_GRV, KC_1, KC_2, KC_3, KC_4, KC_5, KC_6, KC_7, KC_8, KC_9, KC_0, KC_MINS, KC_EQL, KC_BSPC, KC_NUMLOCK, KC_KP_SLASH, KC_KP_ASTERISK, KC_PMNS, \
KC_TAB, KC_Q, KC_W, KC_E, KC_R, KC_T, KC_Y, KC_U, KC_I, KC_O, KC_P, KC_LBRC, KC_RBRC, KC_BSLS, KC_P7, KC_P8, KC_P9, KC_NO, \
KC_CAPS, KC_A, KC_S, KC_D, KC_F, KC_G, KC_H, KC_J, KC_K, KC_L, KC_SCLN,KC_QUOT, KC_ENT, KC_P4, KC_P5, KC_P6, KC_PPLS, \
KC_LSFT, KC_Z, KC_X, KC_C, KC_V, KC_B, KC_N, KC_M, KC_COMM,KC_DOT, KC_SLSH, KC_RSFT, KC_P1, KC_P2, KC_P3, KC_PENT, \
KC_LCTL, KC_LGUI,KC_LALT, KC_SPC, KC_RGUI , KC_LEFT, KC_DOWN, KC_UP, KC_RGHT, MO(_RAISE), KC_P0, KC_PDOT \
),
/* Layer 1, raise layer
* | | | | | | | | | | | | | | | | | | | |
* | | | | | | | | | | | | | | | | | | |
* | | |rgb_up|rgb_dn|rgb_mo| | | | | | F22 | F23 | F24 | | | | | |
* | | | | | | | | | | | | | | | | | |
* | | | | | | | | | VolDn| VolUp| Mute | Play/Pause | | | | |
* | | | | | | |MPrev | | | MNext| | | |
*/
[_RAISE] = KEYMAP(
RESET,RGB_TOG, BL_TOGG, BL_STEP, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
______, BL_INC, BL_DEC, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
______, ______, ______, ______, ______, ______, ______, ______, ______, ______, KC_F22, KC_F23, KC_F24, ______, ______, ______, ______, ______, \
______, RGB_HUI, RGB_SAI, RGB_VAI, RGB_MODE_FORWARD , ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, ______, \
______, RGB_HUD, RGB_SAD, RGB_VAD, ______, ______, ______, ______, KC_VOLD,KC_VOLU, KC_MUTE, KC_MPLY, ______, ______, ______, ______, \
______, ______, BL_OFF, BL_ON, ______, ______, ______, ______, ______, ______, ______, ______ \
)
};

View File

@ -0,0 +1,2 @@
# Harshit
Modified the layout according to me. Full 2u NumPad 0, 5 * 1u modifiers on right of space. Split right shift.

View File

@ -0,0 +1 @@
TAP_DANCE_ENABLE = yes

View File

@ -29,6 +29,9 @@ static uint8_t debouncing = DEBOUNCE;
static matrix_row_t matrix[MATRIX_ROWS];
static matrix_row_t matrix_debouncing[MATRIX_ROWS];
void matrix_set_row_status(uint8_t row);
uint8_t bit_reverse(uint8_t x);
void matrix_init(void) {
// all outputs for rows high
DDRB = 0xFF;
@ -47,18 +50,20 @@ void matrix_init(void) {
matrix[row] = 0x00;
matrix_debouncing[row] = 0x00;
}
}
/*}
matrix_init_quantum(); // missing from original port by Luiz
void matrix_set_row_status(uint8_t row) {
DDRB = (1 << row);
PORTB = ~(1 << row);
}
}*/
uint8_t bit_reverse(uint8_t x) {
/*uint8_t bit_reverse(uint8_t x) {
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
return x;
return x;*/
}
uint8_t matrix_scan(void) {
@ -93,11 +98,24 @@ uint8_t matrix_scan(void) {
}
}
matrix_scan_user();
matrix_scan_quantum(); // also missing in original PS2AVRGB implementation
return 1;
}
// declarations
void matrix_set_row_status(uint8_t row) {
DDRB = (1 << row);
PORTB = ~(1 << row);
}
uint8_t bit_reverse(uint8_t x) {
x = ((x >> 1) & 0x55) | ((x << 1) & 0xaa);
x = ((x >> 2) & 0x33) | ((x << 2) & 0xcc);
x = ((x >> 4) & 0x0f) | ((x << 4) & 0xf0);
return x;
}
inline matrix_row_t matrix_get_row(uint8_t row) {
return matrix[row];
}

View File

@ -26,25 +26,33 @@ F_CPU = 12000000
# Bootloader
# This definition is optional, and if your keyboard supports multiple bootloaders of
# different sizes, comment this out, and the correct address will be loaded
# different sizes, comment this out, and the correct address will be loaded
# automatically (+60). See bootloader.mk for all options.
BOOTLOADER = atmel-dfu
BOOTLOADER = bootloadHID
# build options
BOOTMAGIC_ENABLE = yes
MOUSEKEY_ENABLE = yes
BOOTMAGIC_ENABLE = no
MOUSEKEY_ENABLE = no
EXTRAKEY_ENABLE = yes
CONSOLE_ENABLE = yes
CONSOLE_ENABLE = no
COMMAND_ENABLE = yes
BACKLIGHT_ENABLE = no
BACKLIGHT_ENABLE = yes
BACKLIGHT_CUSTOM_DRIVER = yes
RGBLIGHT_ENABLE = yes
RGBLIGHT_CUSTOM_DRIVER = yes
KEY_LOCK_ENABLE = yes
# Do not enable SLEEP_LED_ENABLE. it uses the same timer as BACKLIGHT_ENABLE
SLEEP_LED_ENABLE = no # Breathing sleep LED during USB suspend
OPT_DEFS = -DDEBUG_LEVEL=0
# custom matrix setup
CUSTOM_MATRIX = yes
SRC = matrix.c i2c.c
SRC = matrix.c i2c.c backlight.c
# programming options
PROGRAM_CMD = ./keyboards/ps2avrGB/program $(TARGET).hex
PROGRAM_CMD = ./util/atmega32a_program.py $(TARGET).hex

View File

@ -0,0 +1,16 @@
# JJ40 Tools
## usb_detach.c
When trying to flash on Linux, you may encounter a "Resource Unavailable" error. This means that Linux's HID driver has taken exclusive control of the keyboard, and the program script can't flash it.
This program can force Linux to give up a device, so that the programming script can reset it.
### To compile:
```
gcc usb_detach.c -o usb_detach
```
### To run:
1. Use `lsusb` to discover the Bus and Device numbers for your keyboard.
2. Run the program: `sudo ./usb_detach /dev/bus/usb/<BUS>/<DEVICE>`.
3. Build and program the firmware as normal.

View File

@ -0,0 +1,33 @@
/* Found at https://www.linuxquestions.org/questions/linux-hardware-18/how-to-unclaim-usb-device-558138/#post3406986 */
#include <stdio.h>
#include <sys/types.h>
#include <sys/stat.h>
#include <fcntl.h>
#include <linux/ioctl.h>
#include <linux/usbdevice_fs.h>
int main(int argc, char**argv)
{
struct usbdevfs_ioctl command;
int ret;
int fd;
int i;
if (argc>1) {
fd = open(argv[1],O_RDWR);
if (fd<1){
perror("unable to open file");
return 1;
}
for (i=0;i<255;i++){ // hack: should fetch how many interface there is.
command.ifno = i;
command.ioctl_code = USBDEVFS_DISCONNECT;
command.data = NULL;
ret = ioctl(fd, USBDEVFS_IOCTL, &command);
if(ret!=-1)
printf("un claimed interface %d %d\n",i,ret);
}
} else {
printf ("usage: %s /dev/bus/usb/BUS/DEVICE\n",argv[0]);
printf("Release all interfaces of this usb device for usage in virtualisation\n");
}
}

View File

@ -118,7 +118,8 @@ section at the end of this file).
/* Define this to 1 if the device has its own power supply. Set it to 0 if the
* device is powered from the USB bus.
*/
#define USB_CFG_MAX_BUS_POWER 500
// max power draw with maxed white underglow measured at 120 mA (peaks)
#define USB_CFG_MAX_BUS_POWER 100
/* Set this variable to the maximum USB bus power consumption of your device.
* The value is in milliamperes. [It will be divided by two since USB
* communicates power requirements in units of 2 mA.]

View File

@ -1,5 +1,6 @@
/*
Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
Modified 2018 Kenneth A. <github.com/krusli>
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
@ -16,30 +17,81 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
*/
#include "ymd96.h"
#include "rgblight.h"
#include <avr/pgmspace.h>
#include "action_layer.h"
#include "i2c.h"
#include "quantum.h"
#include "i2c.h"
#include "backlight.h"
#include "backlight_custom.h"
// for keyboard subdirectory level init functions
// @Override
void matrix_init_kb(void) {
// call user level keymaps, if any
matrix_init_user();
}
#ifdef BACKLIGHT_ENABLE
/// Overrides functions in `quantum.c`
void backlight_init_ports(void) {
b_led_init_ports();
}
void backlight_task(void) {
b_led_task();
}
void backlight_set(uint8_t level) {
b_led_set(level);
}
#endif
#ifdef RGBLIGHT_ENABLE
extern rgblight_config_t rgblight_config;
// custom RGB driver
void rgblight_set(void) {
if (!rgblight_config.enable) {
for (uint8_t i = 0; i < RGBLED_NUM; i++) {
led[i].r = 0;
led[i].g = 0;
led[i].b = 0;
}
if (!rgblight_config.enable) {
for (uint8_t i=0; i<RGBLED_NUM; i++) {
led[i].r = 0;
led[i].g = 0;
led[i].b = 0;
}
}
i2c_init();
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
}
bool rgb_init = false;
void matrix_scan_kb(void) {
// if LEDs were previously on before poweroff, turn them back on
if (rgb_init == false && rgblight_config.enable) {
i2c_init();
i2c_send(0xb0, (uint8_t*)led, 3 * RGBLED_NUM);
rgb_init = true;
}
rgblight_task();
#else
void matrix_scan_kb(void) {
#endif
matrix_scan_user();
/* Nothing else for now. */
}
__attribute__ ((weak))
void matrix_scan_user(void) {
rgblight_task();
__attribute__((weak)) // overridable
void matrix_init_user(void) {
}
__attribute__((weak)) // overridable
void matrix_scan_user(void) {
}

View File

@ -1,7 +1,7 @@
/*
Base Copyright 2017 Luiz Ribeiro <luizribeiro@gmail.com>
Modified 2017 Andrew Novak <ndrw.nvk@gmail.com>
Modified 2018 harshit goel
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 2 of the License, or
@ -19,11 +19,14 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
#ifndef KEYMAP_COMMON_H
#define KEYMAP_COMMON_H
#include "quantum.h"
#include "quantum_keycodes.h"
#include "keycode.h"
#include "action.h"
#define KEYMAP( \
void matrix_init_user(void); // TODO port this to other PS2AVRGB boards
#define KEYMAP_DEFAULT( \
K500, K502, K503, K504, K505, K600, K610, K710, K700, K511, K512, K513, K514, K113, K214, K013, K706, K709, K708, \
K400, K401, K402, K403, K404, K405, K601, K611, K711, K701, K410, K411, K412, K414, K406, K407, K408, K409, \
K300, K301, K302, K303, K304, K305, K602, K612, K712, K702, K310, K311, K312, K313, K306, K307, K308, K309, \
@ -41,6 +44,24 @@ along with this program. If not, see <http://www.gnu.org/licenses/>.
{ K700, K701, K702, K703, K704, K705, K706, KC_NO, K708, K709, K710, K711, K712, K713, K714 } \
}
#define KEYMAP_CUSTOM( \
K500, K502, K503, K504, K505, K600, K610, K710, K700, K511, K512, K513, K514, K113, K214, K013, K706, K709, K708, \
K400, K401, K402, K403, K404, K405, K601, K611, K711, K701, K410, K411, K412, K414, K406, K407, K408, K409, \
K300, K301, K302, K303, K304, K305, K602, K612, K712, K702, K310, K311, K312, K313, K306, K307, K308, K309, \
K200, K201, K202, K203, K204, K205, K603, K613, K713, K703, K210, K211, K213, K206, K207, K208, K209, \
K100, K101, K102, K103, K104, K105, K604, K614, K714, K704, K110, K111, K106, K107, K108, K009, \
K000, K001, K002, K605, K705, K010, K011, K606, K607, KC_NO, K006, K008 \
) { \
{ K000, K001, K002, KC_NO, KC_NO, KC_NO, K006, KC_NO, K008, K009, K010, K011, KC_NO, K013, KC_NO, }, \
{ K100, K101, K102, K103, K104, K105, K106, K107, K108, KC_NO, K110, K111, KC_NO, K113, KC_NO, }, \
{ K200, K201, K202, K203, K204, K205, K206, K207, K208, K209, K210, K211, KC_NO, K213, K214, }, \
{ K300, K301, K302, K303, K304, K305, K306, K307, K308, K309, K310, K311, K312, K313, KC_NO, }, \
{ K400, K401, K402, K403, K404, K405, K406, K407, K408, K409, K410, K411, K412, KC_NO, K414, }, \
{ K500, KC_NO, K502, K503, K504, K505, KC_NO, KC_NO, KC_NO, KC_NO, KC_NO, K511, K512, K513, K514, }, \
{ K600, K601, K602, K603, K604, K605, K606, K607, KC_NO, KC_NO, K610, K611, K612, K613, K614, }, \
{ K700, K701, K702, K703, K704, K705, K706, KC_NO, K708, K709, K710, K711, K712, K713, K714 } \
}
#define LAYOUT_jj50( \
K011, K010, K009, K008, K004, K005, K006, K007, K003, K002, K201, K000, \
K111, K110, K109, K108, K104, K105, K106, K107, K103, K102, K001, K100, \
@ -57,12 +78,3 @@ K411, K410, K409, K408, K404, K405, K406, K407, K403, K402, K401, K400 \
#endif